|
|
Measurement system for pulsed current source
Myška, Radek ; Križan, René (referee) ; Drexler, Petr (advisor)
This work deals with the description and analysis of suitable methods for measurement of non-periodical high-level current pulses. For pulsed current source design and development a suitable measurement system is required. In this work shunt resistor, Rogowski sensor and magneto-optic sensor are presented. The analysis of their properties is performed in order to design a suitable sensor for test current pulse measurement. A design of Rogowski coil sensor has been made. An experimental measurement of current pulses with short time relations has been performed. The suitability of the coil sensor for non-harmonic waveforms measurement has been evaluated on the basis of measurement results. In case of the magneto-optic sensor a concept utilizing an optical fiber has been proposed. The design of the sensor has been performed also. Individual parts of the sensor were verified. Experimental magneto-optic sensors have been built and their properties have been studied.
|
|
|
Comparison of Instrument Transformer and Sensor Applications in Feeder Terminal REF 542plus
Hrycík, Tomáš ; Majer, Karol (referee) ; Orságová, Jaroslava (advisor)
The aim of this Master´s thesis is use of instrument transformers and sensors on field of industry protection. We will compare current and voltage transformers, current sensor – based on Rogowski coil, voltage sensor – based on voltage divider. By this measure devices, we can monitoring values of analog quantities in medium voltage switchgear. It is impossible to compare, measure and analyze without this measure devices. There is protection terminal REF542plus, which can compile this values. The REF542plus ability are measuring, monitoring, remote control and protection. First, we will discuss about theory of sensors and convential instrument transformers and analysis of analog signal. We will compare analog input channel on sensor´s analog module and transformer´s analog module. There are few differences between type of analog modules. For analog signal analysis are important frequency filters and Analog/ Digital Convertor (sigma-delta). We will describe functions and options of REF542plus. In practical part of this project, we will test protection functions of protection terminal. First, protection terminal will be connected to sensors. Second protection terminal will be connected to transformers. For testing we chose Earth-fault directional protection and differential protection. We will make only secondary tests. That´s mean, input analog quantities to REF542plus will be simulated by tester. In all we will verify quality of protection. We will focus on lower settings of protection and we will inject protection by low current. Objectives are testing of trip characteristics and measuring of trip time.
|
|
|
Laboratory test equipment for IGBT transistors
Chvátlina, Pavel ; Vorel, Pavel (referee) ; Patočka, Miroslav (advisor)
This master’s thesis describes the function and realization of the laboratory test equipment designed for measuring and analysing of collector current iC and voltage uCE courses during the opening and closing process of a power IGBT transistor. The opening and closing times toff and ton of the new power transistor IGBT are changing in the range from tenths to the ones s, so the reading of current iC and voltage uCE proceeds in a very short time. The measuring circuit of this test equipment is based on a short-time discharging of a condenser battery to the inductive load over the measured transistor. Consequently it is possible to replace the power supply whose maximum output power would otherwise have to be in the range of ones MW. In the final part of this thesis there are described properties and design of a high-frequency sensor with the Rogowski coil, which can be used for reading collector current course during opening and closing time of the measured transistor IGBT. Collector current iC and voltage uCE courses can be analysed with a storage oscilloscope.
|
|
|
Design digital optical output
Kubáč, Stanislav ; Beneš, Petr (referee) ; Klusáček, Stanislav (advisor)
This work descibes general principles of measuring the alternating current and voltage using conventional and unconventional sensors.This work shows specific parmeters conected with principles of the measurement, advantages and disadvantages of individual measuring procedures, types of output signals, precisions, limitations, ways of power and so on. Part of the work is to find optimal measurement procedure, which can be aplicated to practical measuring of alternating currents and voltage. Main part of the work concerns the realisation of optimal method of measuring alternating current.
|
|
|
Methods of single impulse detection
Juřík, Vladimír ; Bartušek, Karel (referee) ; Fiala, Pavel (advisor)
This thesis deals with measurement method pulsed quantities of electromagnetic field. This thesis was focused on methods, which make use of optic effect. Specially Faraday effect, Pockels effect and magneto-optic Kerr effect. Next it was focused on method makes use of Rogowski coil. At the end was shortly noticed about method makes use of calorimetric sensor. For experimentally realized has been chosen Faraday Magneto-optic Effect. In optic laboratory has been realized absolute methods and different methods making use of Wollaston polarizer on pneumatic optical desk. The main advantage of this method is the capability to measure the high frequency and high current signals. Next in this thesis has been written theory about Rogowski coil. This method has been experimentally realized in laboratory.
|
guest ::
