|
|
Detection of heavy metals in hard tissues by laser-induced breakdown spectroscopy
Konečná, Anna ; Novotný, Karel (referee) ; Pořízka, Pavel (advisor)
This master thesis deals with the detection of heavy metals bioaccumulated in hard tissues by laser-induced breakdown spectroscopy (LIBS). As model samples, murine mandibles and femurs of animals exposed to lead oxide or cadmium oxide nanoparticles were used. The exposure of animals lasted for 6 or 7 weeks. Control group of animals was exposed only to air for a reference. The distribution of biogenic elements and contaminants was determined by mapping the samples' surface using LIBS with a spatial resolution of 30 and 100 µm. The second part of the work focused on the possibility of using the method LIBS for quantitative analysis. Samples of hydroxyapatite standards were prepared as reference material. By their analysis a calibration curve was constructed, and the limits of detection and quantification were determined. Furthermore, a model for prediction of heavy metal concentration by calculation from the calibration curve was presented.
|
|
|
Development of a device and methodology for Laser-Induced Breakdown Spectroscopy (LIBS)
Képeš, Erik ; Ferus,, Martin (referee) ; Lohninger, Hans (referee) ; Kaiser, Jozef (advisor)
Táto práca sa zaoberá prenosom analytických modelov medzi rôznymi systémami spektroskopie laserom indukovanej plazmy (LIBS) a porovnaním LIBS výsledkov získaných na rôznych systémoch. Instrumentácia LIBS aj spracovanie LIBS spektier sú vysoko flexibilné. Bohužiaľ, kvôli týmto flexibilitám sú výsledky získané na jednom LIBS systéme zriedka priamo porovnateľné s výsledkami získanými na inom systéme. Toto je ďalej komplikované rôznymi, často neznámymi, účinkami algoritmov spracovania LIBS spektier. V dôsledku toho sú modely analýzy spravidla špecifické pre systém (a parametre). Prenos analytických modelov medzi rôznými systémami by viedol k významnému zlepšeniu analytických schopností metódy LIBS a k miernemu zníženiu nákladov v priemyselných aplikáciách LIBS. Práca skúma vplyv rôznych stratégií merania metódou LIBS. Naďalej, práca skúma transformáciu získaných LIBS spektier prostredníctvom spracovávania údajov. Práca sa napokon zaoberá prenosom analytických modelov medzi rôznymi LIBS systémami.
|
|
|
Analysis of teeth and bones by laser-induced breakdown spectroscopy
Šindelářová, Anna ; Pořízka,, Pavel (referee) ; Modlitbová, Pavlína (advisor)
The presented diploma thesis deals with the elemental composition of hard tissues – human and murine jaws studied by laser-induced plasma spectroscopy (LIBS). Samples of human teeth contained a disease called ankylosis and the difference in elemental composition of healthy and diseased tissue was observed to localize ankylosis in the tooth. When evaluating the map of the spatial distribution of phosphorus and calcium, a decrease in the concentration of these elements in the ankylosis infected area was observed. Furthermore, murine jaws containing lead were analyzed. When assessing the spatial distribution of lead in tissue, it was found that lead was incorporated in murine teeth in the enamel at the tip of the incisor and molars. In conclusion, LIBS method achieved good results considering the detection of the elemental distribution of hard tissues. It enables to differentiate parts of the tooth in terms of elemental composition and tissue hardness and also to detect changes in the matrix caused by a disease or bioaccumulation of heavy metals.
|
|
|
Korelace charakteristických signálů laserem buzeného plazmatu
Terschová, Vanda ; Novotný, Karel (referee) ; Pořízka, Pavel (advisor)
Laser-induced breakdown spectroscopy (LIBS) is a fast analytical method, but can also be complicated. This spectroscopic method is used to provide a qualitative and quantitative analysis of a sample. The analysis is carried out by capturing the emission radiation of the generated plasma. The accuracy and stability of the measurement is affected by several parameters, such as stability of the laser, physical and chemical properties of the sample, its homogeneity and others, that can not always be eliminated. For this reason other methods are being added to the LIBS experiment that could improve the quality of this analysis. This diploma thesis is focused on a research of the literature on the standardization of laser-induced plasma signal and the possibility of using an acoustic signal for this purpose. For this reason , it is necessary to perform basic experiments and to verify if the acoustic signal correlates with the emission signal. If these signals correlate together, it would be possible to use the acoustic signal for standardization og the LIBS data, which would improve the accuracy of the analysis. In the theoretical part at the beginning other spectroscopic methods are summarised. Then the work is focused on the description of the LIBS method, possible ways of the analysis, standardization of emission signals and its review in the literature. The experimental part is aimed at the study of the acoustic signal that was performed in the framework of this study. At the beginning, there are introduced results of the basic measurements on steel and brass samples. These results were important for an optimization of the experiment. The following section shows the results obtained from the measurements of the acoustic signal on the samples with the same chemical composition but different hardness. At the end the correlation between the acoustic and emission signals is discussed.
|
|
|
Impact of the atmosphere on laser ablation of matters
Černá, Svatava ; Hrdlička, Aleš (referee) ; Pořízka, Pavel (advisor)
This thesis deals with a general overview of laser-induced breakdown spectroscopy - ablation of material and plasma formation when a change of the surrounding environment occurs. The aim is to establish ideal conditions for improving detection, which is difficult for some elements when the measurement takes place in the ambient atmosphere. This is the reason why we change the ambient conditions, the gas (air, helium, argon) and its pressure. Buffer gases (helium, argon) influence the development of the material ablation and quality of generated plasma. That is why we inspect the changes in the signal according to particular atmospheres (signal change in buffer gases compared to the ambient atmosphere). The first part of the thesis presents the principle and physical nature of laser ablation with a brief search of experiments performed so far for similar purposes. Based on this search we determine conclusions about the influence of buffer gasses and pressure on the detection used gasses. In the second part of the work, the controlled experiment is presented, which consisted of the detection of spectral lines of fluorine and potassium, see chapter 5.6 and molecular transitions of calcium fluoride, see chapter 5.10. In a controlled experiment, we established two assumptions. The first assumption is the influence of the inert gas atmosphere, which should significantly improve the detection of fluorine and potassium compared to the air atmosphere. We confirmed this finding only for the argon atmosphere. In contrast, in the helium atmosphere, the detection of none of the elements improved. The second assumption is the effect of reducing the ambient pressure, which in combination with an inert gas should allow the detection of fluorine even at low concentrations in the sample. We consider the measured glass disk in chapter 5.7 to be such a sample. This assumption is not confirmed, as the increased intensity of the fluorine spectral line does not manifest itself in any way when the pressure in the vacuum chamber decreases. Finally, in chapter 7 from the results of individual parts of the experiment, the most suitable conditions for the future detection of the measured substances were proposed: fluorine, potassium and calcium fluoride molecules.
|
|
|
Development of universal software interface for detection units in optical spectroscopy
Belica, Martin ; Pořízka, Pavel (referee) ; Žalud, Luděk (advisor)
This master's thesis deals with the design and implementation of universal user interface for detection devices used in Laser-induced breakdown spectroscopy. The design and implementation are based on analysis of current state of instrumentation used in laser spectroscopy. The user interface should be able to work with high repetition frequency of measurement. Acquired spectra should be visualised to user and it is also necessary to save this data on hard drive. The resulting application must be universal. It means the application must support various types and vendors of detection devices.
|
|
|
Analysis of biotic matrices by Laser-Induced Breakdown Spectroscopy
Střítežská, Sára ; Karel,, Novotný (referee) ; Modlitbová, Pavlína (advisor)
This bachelor thesis discusses the possibility of using Laser-induced breakdown spectroscopy (LIBS) for biological application. The LIBS method was used to determine spatial distribution of a chosen element, cadmium, in selected model plant, white mustard (Sinapis Alba L.) The exposure took place in hydroponic conditions and lasted for 72 hours, therefore it was an acute toxicity test. Three different sources of cadmium were tested, mercaptopropionic acid stabilized quantum dots (CdTe QDs), silica coated quantum dots (CdTe/SiO2 QDs), and cadmium chloride, which was used as a positive control. After the exposure and before determination of the spatial distribution of cadmium in plants, a significant portion of the thesis was devoted to optimization of selected parameters of LIBS measurement (laser energy and gate delay). Subsequently, the cadmium distribution was determined and the obtained results were discussed with regards to the tested substance, its stability and its tendency to aggregate/agglomerate in water medium in contact with testing organism during exposure. In the final part of the work, the suitability of the LIBS method for the determination of spatial distribution of chosen contaminants was evaluated.
|
|
|
Statistical analysis of laser spectroscopy measurements
Slávik, Ľuboš ; Bednář, Josef (referee) ; Hübnerová, Zuzana (advisor)
Cieľom tejto bakalárskej práce je stručne vysvetliť metódu spektroskopie laserom indukovaného mikroplazmatu (LIBS) ako nástroj analýzy prvkového zloženia študovaných vzorkov. Výstupy z prvkovej analýzy (emisné spektrá) sú ďalej spracované pomocou matematických metód regresnej analýzy za účelom nájdenia vzťahov medzi nameranými chemickými prvkami. Tieto dve metódy sú použité na analýzu problému založeného na reálnych dátach, a to nájdenie špecifického vzťahu medzi prítomnosťou uránu a hydrozirkónu v študovanom vzorku uranonosného pieskovca.
|
|
|
Approaches to signal correction and standardization in laser spectroscopy
Schiffer, Štěpán ; Hrdlička, Aleš (referee) ; Pořízka, Pavel (advisor)
The subject of this diploma thesis is the study of a sample position influence on results of an experiment in laser spectroscopy. The aim is to design an appropriate way for standardization of signal obtained at different conditions with the respect to its applicability for stand-off analysis. In the theoretical part of the diploma thesis there are the basics of LIBS method described together with the issues of stand-off experiment and both, basic and advanced approches for the processing and correction of obtained spectra. Also the experiment is designed here, which is used for the analysis of the sample inclination and distance influence on the detected signal. The choice of appropriate ways for the signal correction follows and their applicability and efficiency is then experimentally tested.
|
|
|
Comparison of quantification strategies in Laser-Induced Breakdown Spectroscopy
Hošek, Martin ; Hrdlička, Aleš (referee) ; Prochazka, David (advisor)
The aim of the submitted work is a comparison of methods of quantitative analysis used in laser-induced breakdown spectroscopy (LIBS). The principles of LIBS method are explained at first, followed by a research of the most often used methods of quantitative analysis. The next part provides their description enabling a better comprehension and an eventual use of the methods in practice. Finally, the chosen methods are used to process data from the real experiment and the results are compared.
|
guest ::
