|
|
Selected Parts of the Construction Technology Project for an Apartment Building in Kroměříž
Vyoralová, Tereza ; Hrdlička, Michal (referee) ; Mohapl, Martin (advisor)
In my master’s thesis, I deal with the preparation and implementation of selected parts of the construction technology project of an apartment building in Kroměříž. It is a non-basement building with 5 above-ground floors. The content of my master’s thesis is the preparation of a technical report for a construction and engineering project, a coordination situation with the solution of closer traffic relations, an assessment of the route of the tower crane, the object's time and financial plan, calculation according to THU, a study of the implementation of the main technological stages of the construction object, a construction site equipment project, which contains a technical report of the construction site equipment for rough construction and finishing works, as well as drawings for the given stages, a design of the main construction machines and mechanisms, a time schedule, an itemized budget for selected parts of SO 01.4, a technological regulation for the ETICS insulation system, a technological regulation for the installation of windows. Control and test plans were drawn up for both technological regulations. Furthermore, in my diploma thesis, there are catchment systems of flat roofs and the blow-door test.
|
|
|
Multipurpose facility -Nitra,Chrenová
Vaňová, Vanessa ; Lipka, Miroslav (referee) ; Eliáš, Luboš (advisor)
The aim of the bachelor's thesis is to design and develop project documentation for the construction of new apartment buildings in the city of Nitra. It is a free-standing building with three above-ground and one underground floor in a slightly sloping terrain. The basement of the floor plan extends beyond the above-ground floor, the roof is partly designed as a terrace and partly as a flat green roof. There is a garage, workshop, cellar, utility room and storage for bicycles and stollers. Housing units are located on the upper floors. Each floor has three residential units. The roof above the above-ground floors is a single-skin flat, covered with a layer of aggregate. The foundation structures and the perimeter walls of the basement are made of monolithic reinforced concrete. The internal load-bearing system is designed for all floors as masonry made of ceramic blocks. In the basement there are two supporting concrete pillars transferring the load from the reinforced concrete gutters in the place above the garage. Ceilings, balconies and loggias are made of monolithic reinforced concrete. The perimeter walls above the ground are contact-insulated with the ETICS system.
|
|
|
Apartment building
Medová, Jana ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This bachelor project describes design of an apartment building on the plot no. 318 in the cadastral area Přibyslav. The plot is sloped to the North. The building has three above-ground floors. It is designed as a masonry (Porotherm systém) building. The envelope is insulated with expanded polystyrene panels. Floor structures are designed as pre-stressed concrete panels. The building has flat green roof with semi-intensive vegetation.
|
|
|
Brewery
Dědičová, Helena ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
This thesis deals with the design of brewery in Litomyšl. Brewery with beer production 2000hl per year and restaurant for 140 guests and kitchen have the main function of the building. The building is designed as one construction object and its built-up area is 472,2 square meters. The building has a partial basement, two floors and it has structural masonry system. A load-bearing walls of two floors are formed by clay masonry and the load-bearing walls of the basement are formed by permanent formwork. A roof of the building is a flat roof with a slope of 3 percent and the finish is made of modifed bitumen membrane.
|
|
|
Accommodation
Madejewský, Radek ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of the final thesis is the elaboration of design documentation for the new construction of an accommodation facility, specifically a boarding house intended for recreation. The new building is located in the cadastral area of ??the village Vernířovice. It is a building with three floors above ground and one underground floor. The building is based on foundation strips made of plain concrete and a foundation slab made of reinforced concrete. The vertical load-bearing structures are made of cley blocks and blocks of permanent formwork. Horizontal load-bearing structures are made of reinforced concrete. The roof structure is saddle with elongated dormers.
|
|
|
Multifunctional building in Vsetín
Dvořák, Roman ; Pažourek, Vít (referee) ; Rusinová, Marie (advisor)
The subject of this diploma thesis is design documentation of a multifunctional building. The object is located in village of Vsetín, set in flat terrain. The building is divided to 3 objects. Objects A and C are designed as a residential buildings, object B is the office building. The multifunctional building is with basement, it has four above-ground floors and its roofed with warm flat roof. The structural system of a building is made from ceramic blocks Heluz Family 30 with etics, structures and ceillings are made of cast-in-place reinforced concrete. The part of documentation is fire safety assessment, thermal assessment, acoustic assessment and the daylighting assessment.
|
|
|
Newly-Built Detached House with Accommodation Facility
Čech, Pavel ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
This bachelor thesis deals with a desing of the wooden building of family house in cadastral territory of Dambořice, district of Hodonín. Objects are standing alone in the emerging area. The family house is designed for a four member family, the object with an accomodation capacity is designed for up to eleven people. It is one-storey family house, partly with a basement. There is one stand alone object behind the familly house. The object has accomodation capacity of two above ground floors and no basement. Both objects have a walnut roof of truss trusses. These object also have brick structures with a contact thermal insulation system. The object with an accomodation capacity is designed for recreation. Both object are put into medium sloping terrain.
|
|
|
Detached house, Brno
Kopřivová, Petra ; Šteffek, Libor (referee) ; Kolář, Radim (advisor)
The task given for this bachelor thesis is to compile a project documentation according to the structural part of the decree no. 499/2006. This house, designed for a family of four is located in the city area of Brno – Bosonohy, an area of consistent family house development. Object consists of one underground and two aboveground stories of this disposition: - basement (1S) technical and storage rooms - ground floor (1NP) main entrance with vestibule, garage and living room with an access to terrace - first floor (2NP) rooms for relaxation and bedrooms of both parents and children Construction system of the house – walls (consisting in basement of permanent shuttering and on ground floors of ceramic blocks) insulated with ETICS system. Ceiling structure is in construction of the ceramic system. Roofing is realised by a flat roof assembly of two types – walkable (terrace above ground floor) and non-walkable (main above first floor).
|
|
|
Recording Studio with Accomodation
Fiala, Jakub ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The main aim of this master’s thesis is to design a recording studio in a place of an abandoned agricultural building in a small village called Radešín. The thesis is structured into three parts. Goal of the first part is creation of a design documentation of architectural and structural designs. The building will consist of two storeys, a cellar and a gable roof. The most used building material will be reinforced concrete. Recording studio will offer three recording rooms accompanied by a large control room. Accommodation will include five apartments for ten inhabitants and a common room with kitchen. The second part is focused on design of selected building services. The building will be equipped with an air-to-water heat pump and wood chip boiler for heating. A mechanical ventilation with heat recovery will provide fresh air. Heat pump will also work as a cooling source. Furthermore, designs of the rainwater treatment, water heating, lightning and photovoltaics on the roof are included. The third part revolves around the matter of room acoustics. It describes basic knowledge and terminology of this field, which are then used to solve reverberation. I dealt with three variants – initial state, state with additional dampening and state with additional dampening with movable acoustic panels. One calculation was made in Microsoft Excel, the other one with help of room simulation in Odeon. Finally, I compared these two methods.
|
|
|
Family house
Kratochvíl, Jakub ; Uheríková, Eliška (referee) ; Brukner, Bohuslav (advisor)
This bachelor thesis presents a design of a a family house for family of four members. The house is located in a residential district of the city of Prague - Kunratice. The house is designed in one part with two floors with one floor partly below ground level. The other part is designed with one floor. The layout is divided into two sections. The single-storey part of the house is a daily residential area, on the first floor of the two storey part is night zone for rest. In a recessed floor are utility rooms, study room and gym. Entry to the house and entry to the garage are located on the 1st floor on the north side. The building will be based on the footings of plain concrete and a concrete slab. Basement walls are constructed of permanent formwork filled with concrete. 1st and 2nd floor are made from sand-lime blocks. Walls are insulated with ETICS. The ceilings are from cast-in-place reinforced concrete slabs. Roofing is designed as warm flat roof. Analysis of thermal and mechanical properties of the house and fire safety report are also parts of this bachelor thesis.
|
guest ::
