|
|
The Steel Structure of Car Showroom
Buchta, Vojtěch ; Buchta, Stanislav (referee) ; Hron, Lukáš (advisor)
The task of the thesis was to design a draft and a review of car’s showroom supporting structure. The object is located in the city of Hradec Králové. Floor plan has a size of 30 x 15 m, the height of the object is 7 m at the highest point. The mono-pitched roof is formed by two parts on the same slope 3.81 °. Material of all components is steel S235. All calculations were performed in accordance with valid standards. The structure consists of a load-bearing columns fixed to the ground, the truss girders are designed of hollow cross-sections, pin-suported by the columns. The purlins are pin supported by upper chords of a truss girder, with the lower and upper edges flushing. Purlins support the roof made of roof-panels by Kingspan, thickness 160 mm. Wall casing the technical parts of the object is formed also by system panels by Kingspan. The cladding of the sales area is made of glass panels by Reynaers.
|
|
| |
|
|
The Roofing of the Sport Hall
Štelc, Martin ; Sýkora, Karel (referee) ; Buchta, Stanislav (advisor)
This thesis deals with the drafting and assessment of timber structures, the single-roof sports facility to span 40 meters for the Brno locality. Hall dimensions are 40 x 52.5 m. A height of the hall is 16 m sports hall is designed for most sports played indoors. The supporting part of the roof is designed as an arch structure made of glued laminated wood. The structure is made up of cross-linking - triple joint arches distance of 3.5 m. Arches are connected by purlins. Stability is ensured by placing four fields bracing.
|
|
|
Design of reinforced concrete structure with respect to fire resistance requirements
Pivodová, Alena ; Klodner, Jan (referee) ; Perla, Jan (advisor)
The diploma thesis deals with an analysis of internal forces of B4 reinforced construction of an office building. Analysis takes into account interaction with subsoil and when designing structural parts of the building, different requirements for fire resistance of a structure are taken into account. A Dlubal RFEM 5.17 program was used for finite element analysis, and model functionality verification was performer by using a summation of moments method. The thesis deals with the design and assessment of a point-supported slab, column, inner and external walls.
|
|
|
Load-bearing concrete structure of the residential building
Hejl, Zbyněk ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
Master´s thesis is focused on the design and assessment of reinforced concrete load-bearing structure of a detached house. The supporting structure model is processed in SCIA Engineer. Selected reinforced concrete elements are assessed in accordance with ČSN EN 1992 - 1 -1. Part of the thesis is a technical report and drawings of the shape and reinforcement.
|
|
|
Concrete slab roof of underground parking garage
Řihošek, Jan ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
Bachelor thesis deals with the roofing of the underground parking garage with reinforced point-supported slab. The aim of the work is to find out the internal forces on reinforced slab for two of the construction variants, design and check one construction variants. The replacement frame method and Finite Element Method were used for calculation internal forces using 2D model in the Dlubal RFEM 5.17. The work also includes the design and check of one column.
|
|
|
Concrete flat slab of bathhouse
Novotný, Tomáš ; Koláček, Jan (referee) ; Perla, Jan (advisor)
The topic of this thesis is concrete flat slab of bathhouse. In the first part the thesis deals with the influence of different types of support and models on the size of bending and torsional moments and on the deflection connected with the moments. The second part addresses the reinforcement design of the slab, lintel and column. Subsequently the serviceability limit state of the slab is assessed.
|
|
|
Reinforced concrete structure of administrative building
Hejl, Zbyněk ; Požár, Michal (referee) ; Šulák, Pavel (advisor)
My bachelor thesis focuses on the design of selected parts of monolithic reinforced concrete structures of an administrative building. It is about a locally supported ceiling slab, an inner column and a staircase. Calculation of the internal forces was performed in the SCIA Engineer program and then verified by a hand method. The construction is assessed according to ČSN EN 1992 - 1 - 1.
|
|
|
Strenghtening of the load bearing parts of the production hall
Čížová, Kateřina ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The diploma thesis deals with the strenghtening of the supporting parts of the production hall in Drásov. In the first part the existing load bearing capacity of the structure is solved. The next step is to design of strenghtening variants for nonconforming columns and short corbel. Columns and short corbel are strenghtening with monostrand. At the end of the thesis, verification of the load bearing capacity of the strenghtening structure is performed.
|
|
|
Hall for Metal Production with Administrative Building
Kaňok, Vojtěch ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This diploma thesis deals with the design of a metalworking shed with its adjacent administrative center. Both objects are statically independent. The buildings are located in the town of Bučovice. The dimensions of the shed are 54,78x72,58 m. There is an overhead crane situated in the middle wing. The shed‘s height is +11,62 m. The administrative building has L-shaped plan. Its dimensions are 27,62x8,13 m (the wider part is 15,63 m). The design of the administrative object has two variants. Both variants have composite steel-concrete ceiling structure. The heights of the objects are +11,20 m (A variant) and +18,20 m (B variant). For the A variant, drawings were also drawn up with the design and assessment of structural details and anchoring.
|
guest ::
