|
|
Design of highway bridge formed by beam girder
Řezníček, Martin ; Čihák, Petr (referee) ; Nečas, Radim (advisor)
The aim of diploma thesis is to design a made-up bridge construction over the road network.There were made three studies of bridging which were compared consequently. Two-joint ginder without haunched was selected as the most suitable option and it was designed in details. The construction was assessed according to the ultimate and serviceability limit state.
|
|
|
Reconstruction of the bridge 44-016
Škarda, Jan ; Krejčík, Vladimír (referee) ; Klusáček, Ladislav (advisor)
The purpose of this thesis is the project of the bridge reconstruction nb. 44 - 06 in Zabreh. It is performed the project of the new bridge which should replace current construction. The current construction is not suitable from technical aspects. The project is solved as a prestressed trapezodial slab with 20 m span. The design was judged by the ultimate limit states and usability.
|
|
|
Prestressed slab structure using SFRC
Herka, Martin ; Panáček, Josef (referee) ; Klusáček, Ladislav (advisor)
This thesis deals with the design and solution of a slab bridge structure. There are two varies considered - prestressed concrete structure and prestressed structure using steel fiber reinforced concrete. The aim of the thesis is to assess a contribution to application of steel fiber reinforced concrete in serviceability limit state and ultimate limit state. At the end of thesis is an evaluation of possibility to design this type of structure from prestressed steel fiber reinforced concrete.
|
|
|
Design of the bridge over the river
Býčková, Klára ; Rušar, Jaromír (referee) ; Klusáček, Ladislav (advisor)
The aim is to propose solutions to the new bridge construction due to its unsatisfactory compared to the existing bridge reconstruction project . There are three studies bridging and selected variant trapezoidal plate further processed static opinion. The design was judged by the ultimate limit states and usability. Partial assessments were made for the anchoring system, anchorage area , unravels notched bars and store design to support .
|
|
|
Slab bridge in Staré Město
Pejčoch, Karel ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
The aim of this bachelor thesis is to design of bridge construction over the river of Krupá located near the city of Staré Město. The load bearing system is composed from one prestressed concrete span. The structural design was made in two variants, which were compared between them. For calculations of first way was used the software of Scia Engineering and second way was calculated by simplified manual method of effective width. All calculations were performed according to actual standard EN.
|
|
|
Design of the prestressed ceeling structure
Pírková, Barbora ; Chalabala, Jiří (referee) ; Klusáček, Ladislav (advisor)
This bachelor’s thesis deals with the design and the solution of a prestressed ceiling structure of a building. The preliminary design is established using the method of balancing the equivalent load which is limited by choice of the average normal stress and the method of a surface of feasible prestress. The aim of this thesis is to assess whether such proposed prestressed slab meets the limit states of usability and load capacity and ultimate assessment of the feasibility of the design of this type of construction.
|
|
|
Design of a slab bridge
Strachoň, Martin ; Nováček, Jan (referee) ; Nečas, Radim (advisor)
This thesis deals with the design and solution of a slab bridge structure. In first chapter are presented two options of bridge and one them is selected to next counting. The aim of this work was to design and evaluate the structure on the basis of ultimate limit states and serviceability limit states according to applicable EN standards.
|
|
|
Design of a one-span railway bridge
Tomisová, Gabriela ; Panáček, Josef (referee) ; Nečas, Radim (advisor)
The topic of this thesis is a design of an one-span bridge over a river, a bicycle path and a route for pedestrians. The construction of prestressed beam bridge with one field with lower bridge deck is preferred out of all developed options. The construction is designed and assessed to the ultimate limit state and the serviceability limit state according to actual EN standards.
|
|
| |
|
|
Design of a one-span beam bridge
Fojtů, Jan ; Panáček, Josef (referee) ; Nečas, Radim (advisor)
The aim of the thesis is a safe and economical design of a bridge over a watercourse according to all valid regulations and standards. There were designed three possible options in accordance with the recommended dimensions. The variation with the cross-section that consists of two beams and effective width of flanges is preferred. The thesis is mainly focused on the design of bearing concrete structure.
|
guest ::
