|
|
Impactor for laboratory capture of fine particles
Kodad, Daniel ; Poláčik, Ján (referee) ; Pospíšil, Jiří (advisor)
The focus of this master’s thesis is the issue of fine dust particles suspended in the air and their measurement. The thesis explains the basic characteristics of fine particles and the rules, which they follow. The section then examines the health risks of inhaled particles. Next is explained the influence of particles in the air on the environment, the historical development of the air pollution in the Czech Republic and the most important pollutants. After that is described the legislation, which frames the limits for pollutants suspended in the air. In the practical part is described the methods for calculation the geometry of cascade impactor, the design of three-stage impactor and finally the comparison with professional impactor. The designed impactor was then constructed and tested with wood burning stove as a source of particles.
|
|
|
Fine particles emitted from a heat source into the indoor environment
Hájek, Jiří ; Köbölová, Klaudia (referee) ; Pospíšil, Jiří (advisor)
This bachelor's thesis deals with fine particles emitted to indoor space during combustion in fireplace stowes. The beginning of work is focused on the description of biomass and its combustion. In the following part the pollutants, which are produced by combustion of bio-mass are mentioned, and last but not least is attention focused on current air quality in Czech Republic methods of measure of solid pollutants and measuring equipment. Calculation of concentration is closely described in the experimental part, and then the data, which was measured on different modes of operations of fireplace stowes, is presented.
|
|
|
Thermal stability of the biomass combustion process
Grygar, Jan ; Špiláček, Michal (referee) ; Poláčik, Ján (advisor)
This bachelor thesis is focused on fne particles, which are produced by small combustion units, and their reduction. The frst chapter deals with the issue of fne particles, their creation, composition and their impact on man and the enviroment. The last chapter deals with the design of solution for reducing of emissions of small biomass combustion units.
|
|
|
40/5000 Fine particles produced by the stove
Škvařil, Ondřej ; Baláš, Marek (referee) ; Pospíšil, Jiří (advisor)
This master thesis deals with problematics of fine particles produced during combustion in fireplace stoves. The theoretical part is focused on the analysis of the atmosphere, health consequences, solid pollutants, the formation of particles (origin), particle separation and how they are regulated by laws. Theoretical section of the thesis addresses analysis of biomass and its combustion. In the applied section are listed given methods of the particles measuring according to regulations, common errors during measurement and methods of identification of measured fine particles. Then follow specific measurements of the formed very fine particles produced by the SMPS method. Subsequently, the results of the measurement are evaluated and summarized in the conclusion.
|
|
| |
|
|
Fine combustion particles produced from real burning of biomass
Pažourek, Josef ; Poláčik, Ján (referee) ; Pospíšil, Jiří (advisor)
This bachelor’s thesis deals with fine combustion particles produced from real burning of biomass. The first chapter is about biomass, combustion devices in which biomass can be combusted and last but not least polluting substances, which are created during the combustion. In experimental part the measuring equipment that measures fine particles is presented. After that the results from measurement are evaluated.
|
|
| |
|
|
Ultrafine combustion particles
Sitek, Tomáš ; Skála, Zdeněk (referee) ; Skála, Zdeněk (referee) ; Pospíšil, Jiří (advisor)
This diploma thesis deals with issues of fine and ultrafine particles formation during thermal decomposition and combustion of biomass. An introduction is devoted to a utilization of biomass as fuel. A following part describes the gas products emerging generally during combustion process. A current emission and air pollution situation in the Czech Republic as well as the health impacts of solid pollutants on human are also mentioned. Within an experimental measurement three basic factors that have impact on fine particles formation during combustion of beech wood (i. e. oxygen content in combustion atmosphere, type of the sample and size of the sample) were thoroughly analyzed. Attention was paid to a progress of thermal decomposition and combustion of sample with respect to the particles formation. Finally, a measurement of fine particles amount was accomplished in a real boiler successively with four different biomass pellet types.
|
|
|
Effect of operating parameters of the boiler on presence of fine particles in flue gas
Košťál, Jan ; Poláčik, Ján (referee) ; Pospíšil, Jiří (advisor)
This diploma thesis is devoted to the issues of the formation of fine particles in dependents on the combustion parameters. The first part of thesis is review, which summarized the information about combustion process and about formation of the gaseous products and fine particles inside them which created during combustion process. The main content of thesis is realization of measurements of fine particles from combustion, in several types of the tested combustion devices. Next part is a description of used measurement devices, which used for measurement. Last chapters are focused on evaluation of results from the measurements, comparison of the measurements between themselves and the finding the existence of the dependence of the formation of fine particles on operational parameters of boiler. And all results are evaluated in the conclusion.
|
|
|
Aerosol in indoor microenviroment of homes
Pařík, Radim ; Braniš, Martin (advisor) ; Hovorka, Jan (referee)
This literature review is composed of resources from Web of Science. The study deals with problematics of the indoor air pollution of homes. It is focused on the aerosol, especially PM2,5 particles, which present the biggest danger for human health. This work points out the analysis of indoor and outdoor emission sources, distribution of particles, levels of pollution in the different geografical, social and cultural regions and health effects of these particles. Key words: aerosol, homes, indoor environment, air quality, fine particles
|
guest ::
