|
|
Static solution of garage floor slab
Sitta, Martin ; Požár, Michal (referee) ; Zich, Miloš (advisor)
This thesis presents the design and evaluation of a monolithic reinforced concrete slab, which is point-supported by columns with column heads. There were made two designs of this slab, one without column heads and the second was made with column heads. The simplified static calculation by hand and its results were compared with results from computer FEM software.
|
|
|
Service Hall Velké Meziříčí, Administrative Part
Dulák, Michal ; Jeneš, Rostislav (referee) ; Podroužková, Božena (advisor)
The aim of this bachelor thesis was the design of reinforced concrete cast-in-place horizontal structures about the first floor of three-storied building. Horizontal constructions are made of two-field continuous slab. In static calculation the following are designed and evaluated : ceiling slab, beam, angled slab, staircase, landing, column. Construction has been designed to fulfill functionality and economic point of view. Drawing documentation is a part of the thesis.
|
|
|
Static analysis of reinforced concrete roofing of platform
Popovič, Tomáš ; Strnad, Jiří (referee) ; Zich, Miloš (advisor)
The thesis deals with the static solution of reinforced concrete roofing of bus platform. It is a monolithic reinforced concrete frame structure, which is consisting of circular pillar and girder. The girder has the general shape. The board is double-sided embedded into girder. The loads acting on the construction are transmitted to the foundation soil using reinforced concrete foundation blocks. The content of this thesis is based on the dimensioning of individual elements of the support structure according to ČSN EN 1992-1-1. These elements are dimensioned for the ultimate limit state. The main outputs of this static calculation are drawings of shape and drawings of reinforcement.
|
|
|
Load-bearing timber structure of a storey house
Junková, Karolina ; Šmak, Milan (referee) ; Straka, Bohumil (advisor)
The subject of my bachelor´s thesis is design and static assessment of timber load-bearing structure of a storey house. The object has three floors - first floor, the second floor and attic. The dimensions of ground plans is 14,7 x11,1 meters and the house is 11 meters high. The frame load-bearing structure off wall is formed by wall panels where joist are stored. The truss is designed as a system of purlins. The building is located in Slavkov u Brna climatic loads are solved for this location.
|
|
|
Reinforced concrete structure of the railway platform roofing
Vodová, Pavla ; Bažant, Zdeněk (referee) ; Šulák, Pavel (advisor)
The bachelor‘s thesis deals with assessment of existing damaged reinforced concrete strucutre of the railway platform roofing according to the original project documentation. Apart from assessment of existing structure, there is prepared a design of two alternative solutions. The first alternative is a remediation of damage structure with description of appropriate diagnostic methods for testing concrete structures and with description of technological process of implementation of remediation. The second alternative is design of completely new structure instead of existing one. This new structure is designed as a monolithic frame contruction with restraint reinforced concrete panel and one – step foundation block. In this bachelor’s thesis there were prepared a design and assessment of sub – sections and work – out appropriate drawing documentation. All static assessments are calculated according to ultimate limit state.
|
|
|
Construction of a multipurpose building
Šťastný, Jiří ; Kučera, Zdeněk (referee) ; Kantová, Radka (advisor)
This Bachelor thesis deals with a technology of the rough upper construction of a fire station. The project of the machine set, the inspecting and testing plan, BOZP, the budget and the timetable are added to technological methods. I also worked out the technical report of the building sites facilities including drawings needed. The construction-technological solution of the supplemental thermal insulation of the fire station within the technological regulation, the heat technical assessment, the proposed location of the fasteners, the draft of final processing with respect of HBW index are also elaborated in this thesis. Variant solutions and the assessing of the suitability for using pipe and mobile scaffolding are incorporated as well.
|
|
|
Production Building in Brno - Řečkovice
Horut, Jakub ; Jeneš, Rostislav (referee) ; Podroužková, Božena (advisor)
The design of the monolithic reinforced concrete horizontal supporting structures on the first deck above of a three-storey building is the aim of this bachelor thesis. Horizontal supporting structures consist of continuous slab of three fields heralded by girders in the longitudinal direction. In the static calculation, there are the ceiling slab, one girder, two angled slabs of staircase and the landing designed and evaluated. Structure was designed to fulfill especially functionality and to be economical. The drawings are the part of the work.
|
|
|
Reinforced concrete structure of the apartment building
Tmej, Patrik ; Laníková, Ivana (referee) ; Šulák, Pavel (advisor)
The aim of the thesis is the assessment of choice elements of a four-storey residential building in Litomyšl from the static point of view based on the real project documentation. The thesis specifically follows up girder, columns of circular cross section, internal bearing walls and staircase. Finally, the thesis contain assessment designed ceiling structure and the proposal of alternative solutions. Results determine the reinforcement of selected elements of project documentation and assess whether they meet the load exerted.
|
|
|
Reinforced concrete storage halls
Bezruč, Michal ; Šulák, Pavel (referee) ; Janků, Hynek (advisor)
The Bachler’s thesis is focused on a design of new building of storage hall made of reinforced precast frame. In the thesis is solved middle part, that consist of two fields of two-bay hall. From the static view is qualified purlins, girders, columns and pile foundation including in-situ chalice. In a layout part of the thesis, there are worked up drawings of structure, shape and scheme of reinforcement of every part.
|
|
|
The design of reinforced concrete ceiling
Burda, Patrik ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
The bachelor thesis is focused on the static solution of monolithic reinforced concrete continuous ceiling and a beam in a single family house. The entire structure of ceiling is designed of reinforced concrete. Software Dlubal RFEM is used to determine the effects of load. It works with the finite element method. Assessment of elements is according to the first limit state and also the second limit state. The thesis includes statics calculation, dimensioning of reinforcement, drawing of shape and reinforcement drawings of solved elements.
|
guest ::
