|
|
Study of the influence of feedstock composition and the values of the modulus of elasticity of concrete
Šafrata, Pavel ; Křížová, Klára (referee) ; Hela, Rudolf (advisor)
Modulus of elasticity is significantly reflected feature of concrete, besides the compressive strength in static design nowadays. Low modulus of elasticity can cause unacceptable deflections for subtle skeletal structures. It is at least irresposible to count with empirical formulas since there is a wide range of materials and additives in production of concrete. The aim of this thesis is to study the influence of large fraction aggregate on static and dynamic modulus of elasticity of concrete and recommendation for appropriate measures to produce concrete with high modulus of elasticity. The experimental part is further following up the influence of air content in concrete on the modulus of elasticity.
|
|
|
The waste buildings material to subgrade of the pavement
Ševc, Jan ; Pecha, Karel (referee) ; Stehlík, Dušan (advisor)
The thesis is focused on the use of waste buildings materials to subgrade of the pavement. In detail it deals with monitoring the carrying capacity of the material used to replace unsuitable subgrade mainly of the urban road communications. It practically verifies California bearing ratio and resistance to frost and water of the waste buildings materials firmed by cement for possible use in subbase layers. The amount of residues in recycled bricks is essential for positive results in terms of the properties of materials in subgrade of the pavement.
|
|
|
Properties of cement composites with fiber reinforcement
Jankech, Filip ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
This thesis summarizes the knowledge of the possibility of using organic fibres as dispersed reinforcement into cement composites. It is concretely a summary of knowledge about the types and properties of synthetic and cellulosic fibres, their influence on the properties of fresh and hardened cement composite and lastly a description of the fire resistance of cement composites and the effect of organic fibres on the action of those composites at high temperatures and in the presence of fire. The experimental part is supposed to verify the effect of the cellulose fibres on increasing the durability of the cement composite at high temperatures.
|
|
|
Influence of dosage of steel fibres on the loss of consistency of fresh concrete and compresive strength of hardened concrete.
Kuře, Václav ; Źalud, Oldřich (referee) ; Vymazal, Tomáš (advisor)
Bachelor work is focused on problems of a consistency of fresh fiber reinforced concrete. The consistency was characterized by a slump test and by a test of spilling how is it described in ČSN EN 12350. Obtained results are compared with a reference sample of a fresh concrete and between themselves. Further the work is focused on volumetric changes during maturation which are integral part of physical properties of the concrete. Influence of a dispersed reinforcement was monitored on the cube strength in plain pressure of individual mixed sample too. Total evaluation of tested parameters is states at the end of the work including comment about possible ways of interference of tests.
|
|
|
Comparison of selected parameters of tensile strength of concrete
Rozsypalová, Iva ; Žítt, Petr (referee) ; Daněk, Petr (advisor)
The thesis deals with a comparison of the selected strength tension properties of the hardened concrete and finding relationships between them. This is essentially a simple tensile strength, tensile flexural strength and tensile splitting strength. The text describe the testing procedures to determine the tensile strength of concrete. Furthermore, there are presented the results of testing on different types of concrete (plain concrete, lightweight concrete, steel-fiber concrete, polymer-fibre concrete and high strength concrete). The conclusion deals with the derivation of dependancy between concrete strengths and comparing the values obtained from the available relations with the results of the tests.
|
|
|
Study of influence of input parameters for the numerical modeling of the compression test
Polách, Marek ; Keršner, Zbyněk (referee) ; Lehký, David (advisor)
The thesis analyses influence of input parametres of the 3D Non Linear Cementitious 2 material model for the numerical modeling of compression test performed in ATENA 2D and ATENA 3D software. The aim is to identify parametres with considerable influence and subsequently replicate the load-deflection curve obtained from laboratory compression test by numerical modeling. The effects of selected model and material model settings are studied on three kind of models in total. As tools for analyzing the effects, deterministic and statistic sensitivity analyses were chosen. Parametres with significant influence will be highlighted and added to the group of parametres obtained from numerical modeling of three-point bending test. This will create a set of parametres of considerable influence when it comes to modeling advanced structures with different types of stresses.
|
|
|
Properties of Fiber Reinforced Plastics
Jastrzembská, Alena ; Petránek, Vít (referee) ; Bodnárová, Lenka (advisor)
This thesis deals with the theoretical part of raw materials, production and properties of composite materials with fiber reinforcement and polymer matrix. It also gives a brief overview of selected prominent Czech and foreign producers of composite materials with polymer matrix and fiber reinforcement. The practical section deals with testing the durability of selected composite profiles immersion in aggressive environments and testing of compressive strength.
|
|
|
Modification of silicate materials for floors
Šlechtický, Luboš ; Ing. Miroslav Šťenko, Ph.D., LB Cemix (referee) ; Šťastník, Stanislav (advisor)
The thesis is devoted to the issue of flooring materials, cement and plaster. In the first part are discussed general properties and general requirements for flooring, as well as presents the most important properties of selected flooring materials. The work is dedicated to the modulus of elasticity, adhesion to the substrate and strength parameters of the tested materials. It also evaluates the effects of redispersible polymer powders in silicate compositions intended for floors.
|
|
| |
|
|
Properties, Testing and use of UHPC in Structures
Myšičková, Lucie ; Kocáb, Dalibor (referee) ; Cikrle, Petr (advisor)
Thesis describes properties and composition of UHPC compared to concretes of normal and high strength. It gives examples of already completed structures made of UHPC. The experimental part describes the optimization of concrete mix and production of specimens. In the end results of testing the properties of the developed mix from tests of dynamic and static modulus of elasticity, compressive strength and tensile strength by bending are described.
|
guest ::
