|
|
Detached house
Rulf, Jan ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subjekt of this bachelor’s thesis was to design a detached house and process the study and the design documentation for this house. House will serve as permanent housing for a 4 member family. The walls in basement will consist of permanent formwork, in ground floor will consist of cut brick blocks with an additional contact thermal insulation system ETICS, the ceiling will be reinforced concrete constructions and the house will have a non-moving flat roof. Part of the documentation i salso design covered parking place for two cars.
|
|
|
Masonry House
Anton, David ; Šuhajdová, Eva (referee) ; Lavický, Miloš (advisor)
This is a building modification and extension of the existing recreational object, which lies on the no. 3617/1 and 3617/2, at the edge of the c. Střekov, Ústí nad Labem. The construction and annexes respect the height profile of the surrounding area. The existing recreational object is built as a single-storey non-basement with a saddle roof, the new annex is designed as a single-storey non-cellar with a flat, extensive roof respecting the height of the existing objet. The whole building is designed as one-generation for max 5 members family, where the reconstructed part will create a living room with kitchen and dining room, toilet and bathroom. In the right wing there will be two children's rooms and in the left wing a bedroom with a work area. A large terrace with access from the living room as well as from both wings is provided for relaxation. The construction system is designed as brick from the Porotherm system with Cemex ELEGOHOUSE monolithic ceilings with lost formwork. The existing brick building is built of brick-burning solid and wooden roofing, the new roof will be titanium sheet metal.
|
|
|
Apartment building
Bartošová, Andrea ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
This bachelory thesis is a familly house with two floors, a garage for one space and with partially basement cellar suitable for a four piece family. The building is designed as timberframe construction of the system TWO by FOUR from the lumber KVH prisms. The object is covered by a shed roof, the garage also shed roof connected to the house. The layout of the ground floor is intended as the heart of the house, and a living room with kitchen and dining room, with access to the terrace located on the micropiled over the so-called crawl space and the fireplace in the mirror of the staircase. The resting zone is located in the second floor. The work includes documentation and drawing part prepared as documentation for the implementation of the construction.
|
|
|
Detached house
Černý, Dávid ; Majsniar, Michal (referee) ; Kolář, Radim (advisor)
The subject of this bachelors thesis was to design a single-family house in Brno Mokrá Hora and process the study and the design documentation for this house. Part of it will serve as permanent housing for a 4 member family and the second part as a distribution point for an online shop with 2 employees. The walls will consist of sand-lime bricks with an additional contact thermal insulation system ETICS, the ceiling will be reinforced concrete constructions and the house will have a walkable flat green roof. Part of the documentation is also the modification design of the surrounding terrain and the design of the car park for 2 cars and 1 light commercial vehicle. An interesting design choice is the height level of the roof, which is situated in the same level as the local road. Design documentation was processed using the program AutoCAD, the study and the visualization using both ArchiCAD and Artlantis 5.
|
|
|
Determining the amount of economic rent for single-family house in Brno
Kubásek, Petr ; Gardášová, Alena (referee) ; Klika, Pavel (advisor)
The objective of the thesis is to determine the economic rent amount for a family house located in Brno. The concept “economic rent” refers to the amount of payment that brings adequate profit to the landlord. First, all the factors are identified that compose cost rent, i.e. the rent of mere providing and maintaining a property. The main variable is represented by the reproduction value of a dwelling. For the purposes of this thesis, the reproduction value is determined using the cost method (in agreement with the evaluation regulation). Second, the capitalization rate is determined so that an adequate profit could be calculated. The following two methods are employed: the surcharge method and the method of comparison with the financial market. The thesis presents seven alternatives of an economic rent, depending on the interest rates. Lastly, the calculation of the rate of return is performed, along with a correctness test of the calculation of the economic rent amount.
|
|
|
Single-family house
Kervitcer, Marek ; Berka, Pavel (referee) ; Donaťáková, Dagmar (advisor)
The theme of the bachelor´s thesis is a new building of a single-family house in Olšany, district Vyškov. It is a wooden house with two-floors, without a basement, with a garage. A first floor is connected with terrace. The building is roofed with a flat roof. Part of the house is faced with wood.
|
|
|
Residential House
Aberl, Tomáš ; Svatoňová, Hana (referee) ; Mohelníková, Jitka (advisor)
It is about new- built family house, which is standing alone on edge of the village Troubsko u Brna. The building´s height and architecturally are designed to fulfill requirements of surrounding buildings. The building has a basement smaller than the house itself and it has residential attic. The basement serves as a garage for two cars. The rest of the house is conceived as a single-family house, for one family of for people (two parents, two kids). Construction system is made by brick block of Porotherm, including the ceiling construction. The house has a gable roof which is designed as a roof without purlin system. As covering of the roof serves roof clay tiles.
|
|
|
Family House
Iral, Jakub ; Chybová, Tereza (referee) ; Matějka, Libor (advisor)
The objective of this thesis is to draw up the design documentation for the construction of a single-family house with a garage in Vodňany. It is a brick building with two above-ground floors and one underground floor. The roof is a shed. The vertical load-bearing structure, as well as the non-structural construction, is designed of Heluz ceramic bricks. The house is situated on the flat terrain. The total construction area is 210,62 m2.
|
|
|
House on the slope
Vejr, Tomáš ; Maceková, Věra (referee) ; Myslín, Jiří (advisor)
Aim of this Bachelor thesis is to design a single-storied house with an attic in Suchomasty. The object is single-family detached house with a partial basement, and a garage. The house is designed for family of four. In the basement there is a garage, vestibuled entrance to the building, clothes closet, toilet room, utility room, and stock room. In the ground floor there is a hall and stairs, living room, kitchen and dining room, bathroom containing a toilet, bedroom, and room for house work. In the attic there are two children's rooms, two clothes closets, and bathroom containing a toilet. The vertical structure is made up from wooden platform frame consisting of supporting members 160 × 80 mm. Basement perimeter walls are made of KB blocks 290 × 390 × 190 mm filled with reinforced concrete. The horizontal structure above the basement is composed of reinforced floor with the 150 mm thickness, and above ground floor is composed of strip joist. There is a pitched roof on the house, purlin system.
|
|
|
Family House
Řehoř, David ; Dostálová, Darina (referee) ; Matějka, Libor (advisor)
The objective of this thesis is to draw up the design documentation for the construction of a single-family house. The detached house will include a two-car garage and will be built in the northern part of the village Moravské Knínice, a brick building with two above-ground floors and one underground. The roof is a saddleback. The vertical load-bearing structure, as well as the non-structural construction, is designed of Heluz ceramic bricks. The total construction area is 162,85 m2.
|
guest ::
