|
|
Multipurpose power supply for electroplating system
Pinďák, Michal ; Vorel, Pavel (referee) ; Procházka, Petr (advisor)
The aim of the bachelor thesis is the practical proposal of the multipurpose power supply for the electroplating system. The individual technological processes of electroplating, for which the parameters of the source have to be adapted, are presented in the theoretical part. This part includes the entire division of pulse DC/DC converters without a transformer from the aspect of working quadrants and finally the ways of their controlling. There is also introduced the analysis of parameters of the presumed DC power supply XP Power HDS3000PS60. The conclusion of the thesis is focused on the entire proposal of converter wiring, its construction and subsequent commissioning through the software LabVIEW.
|
|
|
Design and realization stereophonic amplifier class D
Hradil, Jaroslav ; Háze, Jiří (referee) ; Pavlík, Michal (advisor)
The aim of this project is to design a class D stereo audio amplifier with output power of 2 x 50 W into 4 load with THD+N less than 10%. Project is divided into three parts. First part describes the principles of class D amplifiers, the second part contains actual design of amplifier and the last part presents the results of the measurements.
|
|
|
AC power supply with remote control
Štěpnička, Martin ; Papica, Petr (referee) ; Kubíček, Michal (advisor)
The project describes the design of controlled inverters or power generator simulating one phase of European or American distribution network. The generator is able to enter into an output signal of a certain fault conditions designed to testing the electromagnetic compatibility of connected devices. The text is divided into three main chapters. The first one deals with the design of the power generating low-frequency signal. The second part describes the power source used for this generator. In the third section describes the program management unit. End of text summarizes the results. The annex contains a schematic designs and printed circuit boards.
|
|
|
Digital audio amplifier
Tiller, Jakub ; Kratochvíl, Tomáš (referee) ; Dřínovský, Jiří (advisor)
The subject of bachelor thesis is the class-D power audio amplifiers. Their expansion is mainly caused by high efficiency and good audio parameters. The aim of this project is analysis of class-D amplifiers and measurement of the audio parameters. In consequence, there is the design of class-D apmlifier as laboratory equipment with possibility of digital gain controll. At the end of this thesis, there are designs of automatic measurment in VEE Pro environment. The laboratory exercise also introduced in this thesis.
|
|
|
Class D audio amplifier with PWM modulation
Arvai, Luboš ; Petržela, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
The aim of this project is design audio amplifier working in class D with power output 2x20 W. In the beginning is shortly described a principle of amplifiers in class D. In the next chapter is block circuit diagram and requirements list for individual blocks. In next section is closely described circuit design of correction preamplifier, PWM modulator with driver of power transistors, power stage and output filter. At the conclusion is summarized experimentally obtained knowledge. On the basis of this knowledge is described modification of original design.
|
|
|
Laboratory module for educational purposes
Tuhý, Luboš ; Vašíček, Adam (referee) ; Procházka, Petr (advisor)
This thesis describes the design and implementation of the transistor inverter to the subject of power electronics first outcome of this thesis will transistorized inverter that will serve as a demonstration tool in laboratory practice course electrical power. The laboratory preparation, students will be able to virtually test your theory acquired knowledge of the issue. Part of the theoretical analysis will be proposed circuit simulation program through classes Spice.
|
|
|
Plasma Speaker
Kovář, J.
The article describes the design and construction of one-channel plasma speaker. Absence of mechanical membrane gives the plasma speaker no frequency limitation. The design consists of power source to supply control electronic for signal modulation, converter and output transformer. Modulation of audio signal is realized by integrated circuit TL 594 that provides the PWM modulation. Duty cycle and frequency is adjusted by potentiometers. Dual forward converter is used to voltage amplification. High voltage discharge between the electrodes on the secondary winding is modulated by the PWM signal and produces sound.
|
|
|
Power audio amplifier with AC/DC converter
Melša, Vojtěch ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
The aim of this work was to design and construct a simple audio amplifier, which would be based of involvement and components used in switching power sources on the maximum degree (for example from usual ATX sources for computer). The main motivation for development is the existence of many old sources that do not use and big interest of users for the construction of home audio amplifiers for small and medium power. Amplifiers based on switching power sources with greater efficiency and less weight than comparable classic amplifiers (working in classes A, B or AB). Their disadvantage is the complicated design and introduction of distortion and spurious signals to the amplified signal. This work will be described a design of simple amplifier, which will minimize these negative effects. For shortcomings and wrong parameters this proposed involvement will be eventually described and implemented design of amplifier in class D.
|
|
|
Controler for brushless motors
Zdařil, Tomáš ; Bradáč, Zdeněk (referee) ; Kincl, Zdeněk (advisor)
The goal of the thesis was to design and create one-way speed controler for brushless DC motors, that is used in air modeling. The circuit is controlled by the Atmel AVR. As power unit for motor is used Li–pol accumulator. The controller is equipped with BEC to power the receiver and allows monitoring of current consumption and voltage on the accumulator. Measured data can be upload to a PC where they can be displayed by RegulatorPC in graphical form.
|
|
|
Measurement of the vibrations
Diblík, Jan ; Kolouch, Jaromír (referee) ; Biolková, Viera (advisor)
Diploma thesis is focused on principles of measuring the vibrations using accelerometers and using them for making vibration measuring instrument with focus on modern integrated digital accelerometers. In the first part are described ways to measure acceleration and vibrations with available technical supplies with respecting place and purpose of measuring. In practical part are measured characteristics of used sensor, instrument for measuring vibrations is designed and built and for few experimental object vibrations or acceleration are measured and graphical interpreted.
|
guest ::
