|
|
Reconfigurable slot antenna array
Weigel, Filip ; Pítra, Kamil (referee) ; Raida, Zbyněk (advisor)
This master's thesis deals with the basic principles of slot antennas. Models of antennas were simulated in a selected electromagnetic simulator CST MICROWAVE STUDIO (CST MWS). There are several models of slot antennas which are optimized for communication in the car at a frequency 8 GHz.
|
|
|
Basic methods of reflectometry
Kovář, Ondřej ; Hadinec, Michal (referee) ; Fiala, Pavel (advisor)
This bachelor thesis is focused on physical method called reflectometry and it deals with problem of detection faults in cables and its formatting. This thesis describe the posibility of aplication of this method to a coaxial or an optical cable. Theoretical part of this project is devided in two parts. First part is about a coaxial reflektometry and second part is about an optical reflectometry. Both methods are desribed by block diagrams and even by analysis of real machines. Due to modern devices, we are able to find out in very short time the cable lenght or if the cable is damaged. Because of this ability the reflectometer is very valuable and powerful tool and the research in this technical sector is intesive. Final part of this bachelor thesis inscribe the proposal of laboratorial work, which should introduce the reflectometry to other students.
|
|
| |
|
|
Field strength measurement
Novák, Tomáš ; Dřínovský, Jiří (referee) ; Nováček, Zdeněk (advisor)
This thesis is focused on problems of measurement of field intensity especially in short-wave zone of received frequencies. To measure the intensity of electric field, it is necessary to use a suitable antenna whose properties and characteristics/parametres meet best the requirements of this measurement. These requirements are analysed/discussed in the introductory part of this thesis. From these requirements resulted one specific solution which is applicable to this problems. This solution is frame antenna which meets /matches best the requirements of this measurement. Furthermore, a complete suggestion for the frame antenna as well as its calculations were discussed. From individually calculated results graphical functionalities were set together that provided the bases for selection of suitable parameters for frame antenna. Then these bases were verified with similar antenna that was available. In second part of this thesis we modified standard antenna modul RFT FMA11 so that there would be a possibility to use it with any selective microvoltmeter.
|
|
|
System for Precise Measurement of Electrical Length of Coaxial Cables
Podr, Michal ; Polívka,, Milan (referee) ; Šebesta, Jiří (advisor)
This thesis describes a study of the measuring methods determining the electrical length of coaxial cable without using a vector network analyzer. First, a general theory of management and its various parameters is briefly discussed. This section is focused more specifically on the coaxial cable and its parameters. The next part is graphically analyzed process considerations in the design of measurement methods and outlined the block structure of the system. The third section describes the working process, prototype testing of the bridge, its measurement and design of the measuring system. In the fourth part the software is described. In conclusion, the results of the work are discussed, accuracy of the measurement system, the obtained parameters chosen with regard to the principle of the measurement system and the overall evaluation of the applicability in practice.
|
|
|
Spectrum Analyser N1996A-503 and Measurement Uncertainty
Trojan, Martin ; Uher, Miroslav (referee) ; Havlíková, Marie (advisor)
The main target of this master’s thesis is to introduce the reader with the spectrum analyzer, Agilent N1996A CSA. This work explains all the functions of this measuring instrument, control elements and presents some technical parameters. The next part of this thesis deals with the measurement of coaxial cables, so that is why a whole chapter is devoted to coaxial cables and conductors in general. The rest of this thesis deals with issues of measurement uncertainties. This part contains the general procedure for the evaluation of uncertainty, followed by a practical part. The practical part contains measurement of distance to fault and return loss. Measurements were made on 4 samples of coaxial cable. At the end of the practical parts the measured values including the uncertainties and results are summarized in the final paragraph.
|
|
|
Program for design of CATV
Sedláček, Jan ; Hála, Ondřej (referee) ; Říčný, Václav (advisor)
The main task of this master’s thesis is to create an interactive computer programme for the design of small and medium television cable circuits. The first part of this document describes main conceptions of a modification and a distribution of television signals. There are also introduced basic topologies of small and medium sized distribution networks, some passive and active elements in the circuit including their usage. There is also described an algorithm for calculation of circuit’s values. The second part contains a detailed description of created programme with all of its functions. A part of this document is made by a sample calculation of the four variants of circuit and its comparison with computer calculation. In suplement are included selected parts of source code.
|
|
|
Computer design of the small CATV
Sedláček, Jan ; Slanina, Martin (referee) ; Říčný, Václav (advisor)
Main task of this bachelor’s thesis is to create an interactive automatic programme for designing circuits of individual or small common television aerial. The first part of this document describes main conceptions distribution of television signals, parameters of coaxial cable and also some kinds of signals distortion. There are described some important mathematics formulas used for calculation of coaxial cable attenuation and carrier to noise distance important for computing function of programme. The second part describes a procedure of designing of television cable circuit of individual or small common television aerial and includes prototypal calculation of two real circuits and its comparison with results of computer calculation by which correct function of programme is verified. A part of this document is also made by detailed description of programme and its functions. Source code of created programme is included in the end of this document.
|
|
|
Free-Space Optics data link
Šála, Jakub ; Číž, Radim (referee) ; Šporik, Jan (advisor)
In this thesis, shows a current issue for free space optics, limiting their use in practice with regard to the availability and reliability. They conducted measurements on wireless optical links and the observed values is calculated by the availability of the connection. Subsequently, measurements are performed on alternate versions of wireless and copper connections. Observed values were compared with a wireless optical link. It is made of optical design of wireless connections at home.
|
|
|
Measurement of coaxial cables and antennas
ZEMAN, Zdeněk
The work deals with measurement of coaxial cables and antennas. The introduction contains a theoretical description of the physical principle, in the next section there is a description of the device and the conclusion is accompained by a description of the process of measuring and evaluating the results of measuring the output with the development of protocols.
|
guest ::
