|
|
Residence "Letňanské Zahrady" in Prague - Building Contruction Project
Faltys, David ; Hrdličková, Eliška (referee) ; Liška, Pavel (advisor)
The subject of the final thesis deals with constructional technological project of structural work of building E, F, G and undeground garages, which belong to complex of building „Letňanské zahrady“ in Prague. The thesis contains time and financial plan, itemized budget for substructure, technical report, site equipment, machine assembly. The main part of my thesis consists of the technological prescription for foundation slab and construction of carcass substructure „white tank“.
|
|
|
Apartment building
Chomová, Štěpánka ; Pilinszki, Martin (referee) ; Daněk, Lukáš (advisor)
The subject of the bachelor’s thesis is the elaboration of project documentation for a newly-built apartment building in Opava. The apartment building is designed as a four-storey building with a basement. In the above-ground floors are located common house equipment and 14 flats. In the under-ground floor is located collective garage. Flats in the first floor have own terrace and flats in second up to fourth floor have balconies. The vertical construction system in the above-ground floors is masonry. Basement is projected as column system out of impermeable concrete. Horizontal bearing construction are made of reinforced concrete ceiling slabs. The roofing is desing as a one-layer flat green roof. Bachelor’s thesis includes project documentation for the construction.
|
|
|
Apartment building R7
Svitálková, Tereza ; Kučírek, Pavel (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor's thesis was to design and after that to develop a project documentation for a new apartment building R7. The apartment house is located on a plot in Praha – Karlín, Rohasnké nábřeží. The building is designed as a free-standing building with three aboveground floors and one basement. The floor plan of the basement reminds rectangle. There are cellars, garage, and technical facilities in the basemant. On the upper floors there are fifteen aparment units, five units on each upper floor. All apartments on ground floor have its own terrace; apartments on the sedond and the third floor have balconies. The apartment building is based on reinforced concrete foundation slab. The structural system of the basement is also made of reinforced conctrete and is consisted of colomns, beams and walls. The whole envelope of the underground is made from underground waterproofing system – a white tank. The external and internal load-bearing masonry of the upper floors is made of ceramic blocks. The ceiling structure with the balconies is made of reinforced concrete floor slab. The staircase is prefabricated. An elevator is located next to the arms of the staircase. The roof of the aparment building R7 is flat and partly walkable. The exterior building´s envelope is insulated with the ETICS contact thermal insulation system.
|
|
|
Apartment building
Sedláková, Iveta ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of bachelor’s thesis is the elaboration of project documentation for a new construction of an apartment building in Havlíčkův Brod. The apartment building is designed as a three-storey building with a basement. There are 9 apartments on the upper floors. One od them is a barrier-free. In the basement there is a common house equipment aned collective garage. The apartments on the first floor have their own terrace and the apartments on the second and third floors have their own balcony. The vertical construcion system in the upper floors is brick. The basement is made of hydraulic concrete. The horizontal load-bearing structures are made of reinforced concrete ceiling slabs. The roofingv is designes as a single-skin flat green roof. The bachelor’s thesis contains project documentatin for the construction.
|
|
|
Apartment building in the gap site
Doupovec, Vojtěch ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The diploma thesis is focused on design of a monolithic reinforced concrete structure of an apartment building situated in a gap site. The foundation is designed on a foundation slab supported by piles, which together with the walls in the basement are made as a waterproofness concrete structure. It is a two-way wall construction system, made in a combination of masonry and reinforced concrete. The structure was assessed for the ultimate limit state and the serviceability limit state. Due to the requirement for waterproofness, the reinforcement was designed for non-force effects at an early stage. The work includes drawings of shapes and reinforcement.
|
|
|
Load-bearing reinforced concrete structure of a family house
Borovec, Michael ; Januš, Ondřej (referee) ; Zlámal, Martin (advisor)
The final thesis is focused on designing reinforced concrete load-bearing structures of a detached house on two floors and one basement. In the basement will be located the storages, utility room and wine bar. On the ground floor will be located garage for two cars, living room with kitchen and study. On the second floor will be located bedroon and two child’s rooms. The ceiling slab of the second floor, the ceiling slab of the ground floor, the ceiling slab of the basement, spiral staircase, half-turn staircase and walls of the first underground floor with solution as water-resistant construction. Programs SCIA Engineer 21.1 and Dlubal RFEM are used to calculate the internal forces. To varify the accuracy of the results is used manual calculation. The work includes drawings of formwork and reinforcement of the all designing structires. The bulding is designed according to ČSN EN 1992-1-1.
|
|
|
Apartment building
Chomová, Štěpánka ; Pilinszki, Martin (referee) ; Daněk, Lukáš (advisor)
The subject of the bachelor’s thesis is the elaboration of project documentation for a newly-built apartment building in Opava. The apartment building is designed as a four-storey building with a basement. In the above-ground floors are located common house equipment and 14 flats. In the under-ground floor is located collective garage. Flats in the first floor have own terrace and flats in second up to fourth floor have balconies. The vertical construction system in the above-ground floors is masonry. Basement is projected as column system out of impermeable concrete. Horizontal bearing construction are made of reinforced concrete ceiling slabs. The roofing is desing as a one-layer flat green roof. Bachelor’s thesis includes project documentation for the construction.
|
|
|
Housing for Seniors
Pilík, Václav ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors
|
|
|
Selected Parts of the Construction Technology Project of the Psychiatric Clinic of the University Hospital Brno
Drozd, Michal ; Pražáková, Jana (referee) ; Mohapl, Martin (advisor)
The subject of my diploma thesis are selected parts of the construction technology project of the psychiatric clinic of the University Hospital Brno based on the provided project documentation. It is an extension of a new six-storey building to the existing buildings. The thesis contains a technical report to the construction technology project, the coordination situation of the construction, the situation of wider transport routes, time and financial plan by objects, study of the realization of the main technological stages, a site equipment design, a design of a machine set, technological regulation for monolithic structures, quality control and testing plan of monolithic structures, noise study and selected documents for LEED certification.
|
|
|
Multifunctional Building
Velecký, Tomáš ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
This diploma thesis is focused on design cast-in-place reinforced concrete structure multi-storey multifunctional building according to the source material. Specifically, foundation slab and external wall in B1 taking into account the waterproofness of the construction. Then staircase, column in lowest storey and two floor slab are designed as selected load-bearing structure. Elements are dimensioned according to ČSN EN 1992-1-1: Design of concrete structures - general rules and rules for building structures. In the drawing part of the diploma thesis are drawn drawings of the shapes and reinforcement.
|
guest ::
