|
|
The influence of different types of ventilation outlets on the heat transfer by convection from the human body
Zábovský, Ján ; Pokorný, Jan (referee) ; Fišer, Jan (advisor)
The aim of this diploma thesis is to investigate the influence of different types of HVAC system outlets on convective heat transfer from a human body. The first part of the thesis consists of an overview of essentials important for understanding the issue, specifically, metabolism, thermoregulation, heat transfer mechanisms, thermal vote and fluid dynamics. The second part defines the main working hypothesis and describes the used experimental approach leading either to confirmation or disproval of the hypothesis. The chosen approach is based on a measurement with thermal mannequin “Newton” using two different configurations: constant surface temperature and constant generated heat flux. In case of the first configuration, the convection intensity indicator was the value of heat flux generated from each of surface segments of the thermal mannequin. Their surface temperature was the indicator when running the experiment using the second configuration. The value was evaluated by the thermal mannequin as well as the thermal camera Flir i7 which provided more detailed division of the surface. The final part of the thesis describes the progress of the experiment itself, represents gathered values involving analysis of contaminants and confirms or disproves the original thesis.
|
|
|
The influence of moisture on the thermal properties of the gloves
Janíčková, Žaneta ; Toma, Róbert (referee) ; Fišer, Jan (advisor)
This diploma thesis is focused on the assessment of the influence of moisture on the thermal properties of the gloves. The first part of the thesis deals with the research of topics related to the given issue as well as with the derivation of the computational relations needed for evaluation of experimental measurements. The main focus of the work lies on defining the hypotheses and experiments that are used to verify the influence of moisture on the thermal resistance of gloves. As for the experimental part, it describes the individual methods of moistening the gloves from which the moistening through the air humidity and the moistening by the immersion were analysed. To verify the suitability of selected moistening methods, the tested glove samples were measured on the thermal manikin both in a dry and a moistened state under the conditions defined by ČSN EN 511 and ČSN EN ISO 15831 standards. Individual states were repeatedly measured and afterwards the progresses of thermal resistance depending on time were graphically displayed. The thesis also includes analysis of measurement uncertainties as well as evaluation of measurement repeatability. From the obtained results, both the defined hypotheses and theoretical assumptions about the decrease of the thermal resistance of a textile material due to the influence of moisture were confirmed in the conclusion of the diploma thesis.
|
|
| |
|
|
Drivers clothing thermal resistance database for iHVAC system
Hrubanová, Kristýna ; Pokorný, Jan (referee) ; Fišer, Jan (advisor)
This diploma thesis is focused on measurement of thermal properties of clothes by thermal manikin and on application of results for prediction of thermal comfort in system iHVAC. First part of thesis is dedicated to research with relation to this topic and to definitions of main computational equations necessary for experimental measurement. The choise of method for measurement based on available standards is an important part of this thesis. The main focus of thesis lies on measuring 5 combinations of clothes at different calibration temperatures and same temperature of manikin surface. Then data are examined and also the analysis of uncertaities and repeatability is maked. According to assupmtion , the independence of value of heat transfer coefficient to ambient temperature is comfirmed and calculated heat resistance of every single clothes is compared to existing wardrobe for system iHVAC. The outcome of this thesis is specificied and completed virtual wardrobe which serves to prediction of thermal comfort in car.
|
|
|
Determination of thermal properties of gloves by means of thermal manikin
Pidrová, Kateřina ; Pokorný, Jan (referee) ; Fišer, Jan (advisor)
This diploma thesis is focused on determination of thermal properties of gloves by means of thermal manikin. The background research with relation to this topic together with derivation of the computational equations used for the following measurement are presented in the first part. The most significant part of this work is suggestion of procedure for measuring the heat resistance of gloves with thermal manikin based on procedure from ČSN EN 511. This methodics was verificated with 5 pairs of gloves together with analysing the uncertainties and testing the repeatability of this measurement. This work also contains the outline for all of the measured pairs with posibilities of their usage in specific situations and surrounding air temperatures. At the end of this work is mentioned brief summary of achieved results.
|
|
|
Measurement of Cabin Environment by Means of Thermal Manikin and Test Subjects
Toma, Róbert ; Tuhovčák, Ján (referee) ; Fišer, Jan (advisor)
In this thesis, there is processed design of test procedure for innovative HVAC system. This design was created in consecutive phases with use of thermal manikin Newton and climate chamber. Correlation between data from thermal manikin and tests subjects and possible design changes were evaluated after each phase. There are mentioned basics of human thermoregulation, factors which affect thermal comfort and ways in which is possible to measure and rate it with use of thermal comfort scales and comfort zones diagram. The thesis includes survey for testing thermal comfort and scales which are used to complete it. In the end, we mentioned some results alongside with our approach in evaluation of correlation between thermal manikin and test. There is also final design of test procedure for innovative HVAC system which would be used for its calibration and final functionality testing.
|
|
|
Determination of heat transfer coefficients from the surface of the thermal manikin
Fojtlín, Miloš ; Tuhovčák, Ján (referee) ; Fišer, Jan (advisor)
This thesis deals with an experimental determination of heat transfer coefficients from the surface of the thermal manikin. The main focus of the work lies on separating radiative and convective heat fluxes from the surface of the thermal manikin. Both nude and clothed, standing and seated postures were investigated respectively. The tests were conducted in a constant air temperature (cca 24°C) and a constant wind speed (cca 0,05 m.s-1) environment. The major part of the radiative heat flux was eliminated by a low emissivity coating applied to the surface of the nude thermal manikin, and in the case of clothed manikin by a low emissivity two-piece dress. Favorable results were achieved only in the case of the nude manikin measurements. The measurements were performed across 34 zones that logically represent parts of a human body. Experimental work confirms theoretical expectations in the means of a heat transfer. In addition, the results of this work were compared to results of a similar experimental work. The outcomes of this thesis provide essential information in order to create detailed computational models of a thermal environment. Such models require anatomically specific, separate values of convective and radiative heat transfer coefficients.
|
|
|
Measurement of indoor environment by means of thermal manikin
Ševeček, Jan ; Pokorný, Jan (referee) ; Fišer, Jan (advisor)
This dissertation deals with the measurement of the internal environment through thermal manikin Newton, especially in terms of thermal comfort. Measurements were performed in a typical office environment and cabins of small transport aircraft. The course of events and the time constants for the measurement in the office was given by real flow in the office when the sequences of events were unfolded from the usual transactions carried out during the day. In contrast, the second measurement, which took place in the model of small transport aircraft, the course of events and time constants, was performed exactly according to predetermined plan. The other parts of the thesis describe how to calibrate the manikin and then generate a diagram comfort zones. Following are compared individual test cases and events using the diagram comfort zones. Finally, individual test cases and events are compared using the diagram comfort zones and medics according to ISO 14505-2.
|
|
|
Analysis of a heat loss of passive manikin
Kodajková, Zuzana ; Krejčí, Vladimír (referee) ; Forman, Matěj (advisor)
This thesis is about problematics of creating Computational Fluid Dynamics (CFD) model suited for analysis of airflow around sitting passive person. Thesis includes analysis of velocity field distribution, thermal distribution and thermal losses in the surroundings of sitting thermal dummy (computational model) and comparison of these values with experimental measurements. Thesis is a part of large experimental research (this research is not included here) focused on creating of functional method used for person-surrounding airflow analysis in future commercial use.
|
|
|
Thermal comfort and its estimation
Žáková, Monika ; Vondra, Vlastimil (referee) ; Nováková, Zuzana (advisor)
This paper summarizes the problems of human thermoregulation and its measurement, with a focus on the method of indirect calorimetry in resting conditions at different ambient temperatures and during physical activity. It also introduces the issue of human thermal comfort and the methodology of its monitoring using thermal manikin. It describes PowerCube Ergo (Ganshorn, Germany) and Cardiovit AT-104 (Schiller, Switzerland), the diagnostic devices used to spiro-ergometry measurements. It introduces the options to export data. The work proposes the protocol for measuring the thermoregulation of the small group of volunteers, which is realized by the practical part. According to the same protocol is monitored thermal comfort of the thermal manikin. In MATLAB is created the application, allowing clear analysis of measurement records. The data are evaluated and discussed.
|
guest ::
