|
A Water Management Analysis of the Vlachovice Reservoir on the Vlára Watercourse
Rajsiglová, Veronika ; Marton, Daniel (referee) ; Menšík, Pavel (advisor)
The thesis focuses on a process of water management analysis of storage and protective function of the Vlachovice reservoir on the Vlára watercourse. The work contains an alternative proposal of the reservoir storage volume in Microsoft Excel, spreadsheet program with accessible functions whereby progression of arithmetic and logical algorithm simulating operation of reservoir storage function is created. An alternative proposal of protective volume of the reservoir is created in HYDROG program, where calculations of transformation of flood waves for PV 100, PV 1 000, and PV 10 000 are performed. Moreover, the work includes simplified analysis of the hydropower potential of the proposed reservoir.
|
|
Reinforced concrete structure of a administrative building
Čačaný, Matej ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
The diploma thesis is focused on design and assessment selected parts of the reinforced concrete structure supporting six storey office building with regard to the ultimate and serviceability limit state.This thesis contains a static calculation and technical drawings of concrete slab above first floor, staircase and two columns. For calculation of internal forces was created a 3D structural model in Scia Engineer 16. Assessment of all designed parts of the structure is done according to Eurocode 2 (ČSN EN 1992-1-1).
|
|
Rainwater reuse in the sports and cultural center
Bardonová, Hedvika ; Vaščáková, Alena (referee) ; Vrána, Jakub (advisor)
The diploma thesis is focused on rainwater reuse in the sports and cultural center and elaboration of project sanitary equipment installation. The theoretical part of the thesis is focused on performance issues rainwater reuse in the buildings. In another part of thesis are drawn calculations with three variants of the design volume storage reservoir for rain water. The drawings are part of the project.
|
|
Design of load-bearing structures of residential building in Prague
Cetkovský, Jan ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The diploma thesis is aimed for design of load-bearing structures of residental building. The designed parts of building are reinforced concrete two way slab with lintels above 1th floor, reinforced concrete two way cantivelered slab above ground floor, reinforced concrete point-supported slab below ground floor, reinforced concrete columns in basement, reinforced concrete staircase in basement and static check of loadbearing walls in ground floor. The thesis contains static design, which is provided in calculated software RFEM Dlubal 5.07. The result of static design is drawing documentation of these calculated elements.
|
| |
|
Guesthouse
Vlčková, Bára ; Kučera, Radim (referee) ; Pěnčík, Jan (advisor)
This bachelor thesis is a project of new five-storey, semi basement guesthouse in Opava. This guesthouse will be used for accommodation, catering and recreation. Accommodation capacity is 21 people. In the basement is a technical background. The first floor is designed for the overall run of the guesthouse, staff, catering and sports. In the second and third floor are rooms for guests. Almost every room has a balcony. In the fourth floor is a common room with adjoining terrace. The building is brick. The vertical structures are made of ceramic blocks. Outer walls are insulated by outer contact system. The ceilings are mostly ceramic-concrete and a smaller part of the reinforced concrete. The guesthouse is roofed by single-flat roof.
|
|
Multifunctional building
Starý, Martin ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This master’s thesis focuses on the preparation of project documentation for construction part of a multifunction building. This buildig has a five floors, the first one is a underground and four of them are above grand. The building is located in part of Prague – Dolní Chabry. Building has a rectangle shape which isin the midle shifted and makes two similar section. Each sectin has own main entry, stairs and lifts. Orientation the longer facades of the multipurpose house are facing to south and north in the longer asis. Garage for resident is located in the lowest floor. In the first floor above ground is commercial part of the house, six commercial spaces. In the rest of the floors are located 26 apartments. Vertical structure are made of the Porother systém and Best systém, celings are meda from prefaricated reinforced concrete panels. Structure of the roof is solid by single skin flat roof.
|
|
Residential building
Calda, Marek ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The diploma thesis designs project of residental house in Sluhy village. The thesis solves layout and spatial studies, technical reports, drawings for detailed documentation, simple static calculations, building physical examination and assessment of fire safety The architectural and spatial design is based on shapes and proportions oft he original building, which demolition was realized during the project developing. The desing is also based on shapes of existing buildings in surrounding, it means large rural homestead near Prague. There are designed eight dwelling units in the residental house ranging from one room with kitchen to five room with kitchen. All of them are accesible common entrance. Common garage are situated on the ground floor.
|
|
Turn-over table for horizontal boring machine
Obdržálek, Adam ; Bambuch, Josef (referee) ; Foller, Bronislav (advisor)
Master thesis solves engineering design of the turn-over table about size clamping surface 2000x2500 mm for horizontal boring machine WRF 130 CNC. According to requisite parameters submitter, firm Fermat CZ Ltd, is processed engineering design of the drive rotary axis, hydraulic clamping, mouting device and procedure mouting all systém. Everything is documented in the calculations and drawings. Consultations proceeded in firm Fermat CZ Ltd. All solution is enhancement of suggestions and adviced, that the have had in construction and on workshop to to a given problem.
|
|
Business Plan
Zajícová, Ivana ; Krátký, Petr (referee) ; Kocmanová, Alena (advisor)
The subject of this Master’s thesis is to define of the enterprise’s business aim and apply it to concrete business plan. The first part of this thesis concludes an entry to the sector of small and midle-sized enterprises; there are definitions of specific attributes of these enterprises, their advantages and disadvantages, and their importance for an economy and the procedure of processing the business plan. In practical part are applied theoretical findings including important analysis and calculations supporting defined goal. Thesis includes proposal for development of the company based on specific advantages and suppresed the most significant threats.
|