|
|
Enhancement Of Axial Ratio Bandwidth Of Antenna Array By Parasitic Patches
Spurek, Jan
This paper summarizes the concept of a circularly polarized antenna array fitted with parasitic patches to increase its axial ratio bandwidth and compares the results of simulations and measurements taken on a reference antenna array. The measurements show a good agreement with the simulations and confirm validity of the proposed technique.
|
|
|
Artificial magnetic conductor for textile-integrated circularly polarized antenna
Ritter, John Richard ; Kadlec, Petr (referee) ; Raida, Zbyněk (advisor)
This thesis deals with a circularly polarized antenna using an artificial magnetic conductor (AMC). The concept for this antenna is adopted from [1]. The antenna structure was simulated in its original, published form to verify the validity of the results in [1]. The antenna structure was then modified for manufacturing on a textile substrate and for operation in the ISM 5,8 GHz frequency band. After the modification the antenna was manufactured. The antenna properties were subsequently measured to verify the simulated results. The antenna can be potentially used in wireless communication systems, such as wireless body area networks (WBAN).
|
|
|
Wideband low-profile circularly polarized antenna array
Benites Ayala, Jhony Cristian ; Cupal, Miroslav (referee) ; Raida, Zbyněk (advisor)
This bachelor’s thesis is focused on the study of a novel type of wideband low-profile circular array antenna with circular polarization and high gain. The aim of this thesis is to design, optimize and implement the proposed antenna for a 5.5 - 7 GHz frequency band. The thesis deals with theoretical fundamentals in order to subsequently present the concept of the antenna. Furthermore, it describes its design and implementation stages. The antenna was designed in the full-wave program CST Microwave Studio and fabricated on dielectric substrate. Both simulated and measured property results are evaluated in the conclusion.
|
|
|
Circularly polarized SIW cavity-backed microstrip patch antenna
Procházka, Petr ; Láčík, Jaroslav (referee) ; Mikulášek, Tomáš (advisor)
This bachelor thesis deals with a circularly-polarized substrate-integrated-waveguide cavity-backed microstrip patch antenna. The first part dedicates basic theoretical knowledge of microstrip patch antennas such as patch shape, the possibility of its excitation etc. The following part describes the possibilities and adjustments of generating circularly-polarized wave from a microstrip patch antenna for generating circularly-polarized waves and general knowledge about the advantages and application of circularly-polarized wave. The next part deals with a step-by-step design of a proposed antenna. The last part present a comparison of simulated and measured results.
|
|
|
Textile slot antenna
Špůrek, Jan ; Polívka,, Milan (referee) ; Raida, Zbyněk (advisor)
This diploma thesis is focused on design of various antenna structures, based on slot antennas, created in the wider wall of a rectangular-shaped waveguide. As the substrate, it is used a 3D textile material, while its properties are examined. They were designed structures, that operate with linear and circular polarization, and other related structures, that are used for feeding and power division. Structures are designed to operate at central frequency of 8 GHz and its vicinity.
|
|
|
Circularly polarized dielectric resonator antenna
Zechmeister, Jaroslav ; Kufa, Martin (referee) ; Mrnka, Michal (advisor)
This thesis discusses the design circularly polarized dielectric resonator antennas for ISM band 5,8 GHz. In this work are explained and compared different ways of resonator feeding. There are also discussed the possibility of generating a circular polarization from a aperture feeding. Two methods of generating circular polarization in dielectric resonator antennas are simulated in CST Microwave Studio. This methods are C-shaped slot and cross slot. For antenna with cross slot feeding is also simulated effect of the manufacturing process to characteristics proposed antenna. The antenna is made, measured and the results are compared with simulations.
|
|
|
Patch antenna with switchable polarization
Havelka, Michal ; Pokorný, Michal (referee) ; Raida, Zbyněk (advisor)
The bachelor’s thesis deals with the analysis of basic planar antennas, the design methods, optimization and simulation in ANSOFT Designer. Attention is turned to the design of aperture coupled microstrip antennas. First, the antenna with a simple slot is designed. Second, the design of the ring slot coupled microstrip antenna is described. Both the antennas are designed for the operation frequency 2,45 GHz. The second part is devoted to the antenna with switchable polarization. Using three PIN diodes powered by lithium battery of 3-V, the linear polarization (both the horizontal one and the vertical one) and the circular polarization (both the right-hand one and the left-hand one) can be switched. The results were verified by experimental verification.
|
|
|
Circularly polarized serial antenna array
Hurt, Martin ; Tkadlec, Roman (referee) ; Kufa, Martin (advisor)
This work focuses on the design circularly polarized serial antennas array operate in the ISM band (5.725 GHz to 5.875 GHz). Design of antennas is divided into three parts. In the first part is designed feeding system, followed by two types of circularly polarized antennas and at the last point, these components are integrated. Furthermore, these antennas are fabricated, measured their parameters and used for experimental verification of the influence of multipath transmission in-vehicle.
|
|
|
Biconical dipole antenna with circular polarisation
Urbaník, Jaroslav ; Černý, Petr (referee) ; Raida, Zbyněk (advisor)
Tato diplomová práce se zabývá teoretickými poznatky a návrhem bikónické antény pracující v kmitočtovém rozsahu 4 až 8 GHz. V rámci práce jsou také popsány způsoby impedančního přizpůsobení a vybrané typy polarizátorů elektromagnetických vln a radioprůzračných krytů. Na základě teoretických poznatků je určena koncepce návrhu bikónické antény a vybrán vhodný polarizátor pro zajištění kruhové polarizace vyzařovaných elektromagnetických vln.
|
|
|
Parabolic antenna feed for X band
Lecián, Petr ; Mazánek,, Miloš (referee) ; Kasal, Miroslav (advisor)
The work addresses the unusual proposal feed for parabolic antenna with circular polariza-tion signal. This is a modified waveguide feed, waveguide polarizer with a septum. Contemporary RHCP and LHCP wave occurs in several applications of microwave commu-nication and measurement system. From this point of view the septum polarizer can be useful. The septum polarizer is a four-port waveguide device. The square waveguide at one end con-stitutes two ports because it can support two orthogonal modes. A stepped septum divides the square waveguide into two standard rectangular waveguides sharing a common broad-wall. The size of the septum as well as two versions of the waveguides excitation were analyzed and are described in this paper. Ansoft HFSS is software for design and simulation of feed. This software can visualize not only the specified model feed, but also the course of electromagnetic field in feed and over time.
|
guest ::
