|
|
Coating properties of cutting tools carbide
Doležalová, Petra ; Bumbálek, Bohumil (referee) ; Osička, Karel (advisor)
Diploma thesis is divided into two parts. The first part is focused on theoretical description of coating methods, on currently used coatings, their properties and it is also focused on description of methods, which are used for analyzing each property. The second part focuses on testing of coatings and analyzing of the values obtained from experiments. The aim of this thesis is then to compare the properties of the tested coatings.
|
|
|
Evaluation of Surface Layers of Ball and Sliding Bearings Components
Šafář, Martin ; Hutařová, Simona (referee) ; Doležal, Pavel (advisor)
This bachelo’s thesis solve the problems abrasion film bearing. The purpose of this thesis was used four type film, ISOFLON, Xylan 1010, DLC a PTFE + Niborit 5P.By one of tendenci is specifi coefficient friction over tribological test. On the next tendenci was size film for and after a tribological test find, elese size abrasion. Was make chemical analyse of all film.To elements interaction study light microscopy, scanning electron microscopy equipped by energy dispersive mikroanalyses.
|
|
|
Measurement of wear in shock absorber with magnetorheological fluid
Žáček, Jiří ; Strecker, Zbyněk (referee) ; Roupec, Jakub (advisor)
This bachelor thesis deals with measurement of abrasivity of magnetorheological fluids and its effect on hydraulic shock absorber. The abrasion could be measured and evaluated by many ways. The pin on block measurement method has been selected for this test. The pin was moving on a steel block while the whole system was surrounded by magnetorheological fluid. According to results, the lifetime of magnetorheological shock absorber is 4 times shorter than classical damper. Results of this thesis could be helpful in damper construction or in development of new magnetorheological fluids.
|
|
|
Establishment of bank slope retreat forecast
Čuda, Ondřej ; Pelikán,, Petr (referee) ; Šlezingr, Miloslav (advisor)
The diploma thesis deals with the assessment of the condition of the bank area of the flooded gravel sand pit Hulín, the subsequent design of active anti-abrasion structures and the determination of the point of maximum retreat of the bank line. As part of the assessment, a personal field trip was carried out, during which, in agreement with the supervisor, a shore section was designated for the subsequent proposal of a stabilization measure and its photo documentation. From the data provided by the supervisor, the characteristics of the waves, the starting length of the wind, the level of the heel of the highest abrasive log house were calculated and the point of maximum retreat of the shoreline in the focused transverse profile of the solved section was determined graphically. Part of the diploma thesis is the design of a total of six active anti-abrasive structures, the construction of which will prevent further retreat of the shoreline and support the creation of a habitat for local animals.
|
|
|
Mortar with alkali-activated matrix
Černá, Hana ; Hela, Rudolf (referee) ; Bodnárová, Lenka (advisor)
The thesis addresses the issue of alkali-activated materials and their manufacturing components. In the theoretical part the description of such materials is provided and the requirements for source materials are defined. The theoretical part further addresses the resistance of alkali-activated materials and their lifespan - namely sulphate resistance, chloride resistance, acid resistance, frost resistance, porosity, carbonation, resistance, abrasion resistance and heat resistance. The experimental part of the thesis focuses on compounding four different mixtures of alkali-activated materials. In the loosened stage, the weight was measured. In the hardened stage the weight was measured as well as the tensile strength when bending, the strength under pressure applied, heat resistance, water and defrosting chemicals resistance and formation of cracks.
|
|
|
Assessment of state banks and a proposal for stabilizing the selected dam reservoir
Kroček, Tomáš ; Pelikán, Petr (referee) ; Šlezingr, Miloslav (advisor)
This thesis covers the state assessment of the selected bank sections of dam reservoirs Vranov and Boskovice. Data used and processed in this thesis were acquired by visiting both sites several times in order to perform measurements and make photographic documentation. Futhermore, data on reservoirs' water levels from 2000-2011 provided by Povodí Moravy s.p. were used. In order to determine bank line regression, the above-mentioned data were processed using the Šlezingr's modification of the method of abrasion terminants determination. Results for dam reservoirs Vranov and Boskovice are then compared with results of dam reservoir Brno, which were produced by the author within the framework of his bachelor thesis using the same method. At the end of the thesis, the author presents several possible forms of stabilization and protection of disrupted banks of dam reservoirs, including their drawings.
|
|
|
Wear resistence of cladding
Pagáč, Aleš ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
The subject of this Diploma thesis was study of wear resistant deposits, including appropriate basic and filler materials and welding technologies suitable for a particular application of hard carbide overlays of blade mixer for foundry sand. Analysis of suitable filler materials focused on extreme abrasion and select tungsten carbide hardfacing, together with a selection of appropriate overlays welding methods for welding tungsten carbide, including the conditions and parameters surfacing. The practical part deals with the design and evaluation of the experiment, three samples welding of non-alloy structural steel, tungsten-carbide hardfacing, technology MCAW - WC flux cored electrode in protective active gas.
|
|
|
Development of industrial floors with utilization of by-product
Radějová, Lucie ; Durica,, Tibor (referee) ; Bydžovský, Jiří (referee) ; Ševčík, Milan (referee) ; Drochytka, Rostislav (advisor)
This work deals with the use of waste materials in the development of new industrial floors. The main task of this work is to choose a suitable waste materials, and design a new material using such materials, while achieving the required physico-mechanical properties. The aim of this work is also to verify the effects of process application, suitable microfiller and final coat and propose a suitable alternative industrial floors, which would not only be in terms of economic efficiency, but also in terms of ecological suitable replacement for commercial products.
|
|
|
Development of abrasion-resistant concrete and testing methods
Procházka, David ; Bodnárová, Lenka (referee) ; Hela, Rudolf (advisor)
This diploma thesis deals with concrete abrasion resistance against abrasion. The constructions of transport and water management structures are most stressed by the action of abrasion by means of travel of vehicles and flowing water. Abrasion reduces the durability of the structures. The prerequisites for achieving the best possible abrasion resistance are examined. Furthermore, test methods that are currently used worldwide. The experimental part deals with the influence of individual types of aggregates amphibolite (Želešice), fecal gravel sand (Žabčice) and basalt (Bílčice) on abrasion resistance. Furthermore, the dependence between the strength of the concrete and the hardness of the surface for abrasion resistance. Abrasion resistance testing was determined by concrete abrasion, abrasion resistance by the Böhm method and by water jet.
|
|
|
Stabilization of the flooded sand pit near Hulín
Tomšej, Lukáš ; Svoboda, Ondřej (referee) ; Šlezingr, Miloslav (advisor)
The diploma thesis assesses the current state of the Hulín gravel and sand plant and pays attention to abrasions of severely damaged banks of the reservoir. With the help of the design of a suitable biotechnical stabilization, the receding of the shoreline in the section of interest will be prevented. The basis for the processing of appropriate bank stabilization proposals is the results achieved using a method of determining shore retreat. The individual developed variants of the bank remediation solution emphasize the use of vegetation support, especially suitable bank stands to ensure the stability of the banks and protection against abrasion.
|
guest ::
