| |
|
Project of Photovoltaic Power Plant Grid Connection
Blažek, Tomáš ; Procházka, Aleš (referee) ; Orságová, Jaroslava (advisor)
This bachelors thesis deals with photovoltaic technology and economic evaluation of used technology equipment. The first part describes the technology for extraction of power from photovoltaic sources - transformer 22/0,4kV and its basic parts. Then there is the calculation of the amount of openings for cooling the transformer according to ČSN 33 3240. The second part focuses on the description of the major part of the photovoltaic plant. Here are divided solar panels on the material from which they are produced and the type of installation in the field. Next is describe the types of inverters, their principles and functions. The last part compares the different types of transformers and operating costs over the lifetime of plants (20 years), are described factors for proper selection of inverters and solar panels.
|
|
Modernization the Dukovany Nuclear Power Station
Kissler, Martin ; Martinec, Jiří (referee) ; Fiedler, Jan (advisor)
Thesis focuses on a detailed technical description of all important parts of secondary circuit in Dukovany power plant and its connection to other systems of power plant. In thesis are analyzed significant adjustments which have been made during the entire operation of power plant including in particular the actions associated with project called Utilization of project reserves of units EDU. In the main part of the thesis were carried out calculations of the power plant's power for states before and after the modernization and there is also analyzed the impact of individual changes on the whole power plant. These changes are with the entire secondary circuit drawn in the T-s diagram.
|
|
Optimalization of the die cast process of high-voltage transformers.
Borunský, Tomáš ; Fiala, Alois (referee) ; Maroš, Bohumil (advisor)
This thesis deals with choises of using mathematical statistics when optimising the compression casting process of high-voltage device transformer. There is a theoretical consideration to be found in the introduction which concerns the compression casting itself and all necessary information connected with it. Then there is a key numerical analysis part following. In the first instance there are variability problems of individual casting device discussed and then a regression analysis made to demonstrate and prove a link between the partial discharge and the key parameters of casting process. Finally an “optimal” casting sequence is suggested and alternative attitude problems with the assistance of Design of Experiments (DOE) are discussed.
|
|
Step-up convertor with transformer
Poštolka, Martin ; Procházka, Petr (referee) ; Hejkrlík, Jan (advisor)
This work focuses on the proposal and realization of high-frequency switching source. It consists of a theoretical and a practical part. The theoretical part includes selection and summary of the parameters of converters which we use. It also includes schemes and visual display of the important continuance of magnitudes. We can also find there the enumeration of advantages and disadvantages of every single converter. Further, it is concerned with the selection of the converter which is most suitable for our work. The practical part consists of the calculation and the solution of the step-up converter with the transformer. The realization and appropriate choice of components follows. There is also described the power supply of the switching transistors and how to operate these device.
|
| |
|
Intelligent charger for Pb accumulators
Hadwiger, Tomáš ; Šebesta, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor project deals with lead accumulator charging. The properties of this acumulator charger are described here and the best possible way of charging has been based on these properties. The capacity of the accumulators has also been taken into account. The charger itself is able to distinguish between the twelve-volt and the six-volt accumulator. The charger prevents accumulators from overcharging and does not charge damaged ones.It also contains the protection against reversing polarity. The project contains complete scheme, DSP layout, lists of components and their placement on the DPS. The design of the transformator suitable for the charger is also included.
|
|
Distance Practical Education of Electric Machines
Šelepa, Jan ; Huzlík, Rostislav (referee) ; Hájek, Vítězslav (advisor)
This work contains scheme of practical point of distance training in the field of electric machines. It consits of three parts nessesary for consistence of entire work. In first part we have a description of data networks used to communication with virtual laboratory. Further there is a list and description of software fit for our study. These are programs capable of controling measurements, e.g. . LabView, Control Web, TestPoint, ScopeWin etc. In second part we have selection of measurment experiment. As experiment i measured the effectivness of three-phase transformer. The values archieved during the experiment where recorded and processed into form of graph and tables. In last part i used processed results to create functional simulation of measurement using MS Excel software. Further i calculated characteristics for equivalent circuit diagram of the transformer, that where equivalent to the real values measured in laboratory.
|
|
Apparatus for parameter identification instrument voltage transformer
Tománek, Drahomír ; Valenta, Jiří (referee) ; Dohnal, Petr (advisor)
This master thesis describes the design and production of devices for identifying the parameters of the instrument transformer. Work is divided into seven chapters. The first part focuses on the production of instrument voltage transformer. The next section describes the measurement and description of the parameters of instrument voltage transformer and design of printed circuit boards. Another section is devoted to a program for measuring card. The final part is manufactured and tested unit conducted the first test measurements.
|
|
Power supply of electrostatic separator
Broďák, Kamil ; Pazdera, Ivo (referee) ; Huták, Petr (advisor)
The diploma thesis focuses on the problems of electric power precipitators. Due to their current dominant position, the work concentrates on the sources of single phase transformers operating at the frequency of 50 Hz controlled by thyristors. The first part describes the electrostatic precipitator and its principle. This is followed by a brief insight into the proposal for an electrostatic precipitator. The work also explains the high voltage source that is divided into a transformer with a rectifier and into a control box with power circuits and control circuits that provide the power supplied by a transformer. The work also offers an explanation of the HV source system that operates at different conditions. The last part suggests a proposal for cooling cabinet including thyristors, for power line control box resources, for a supply line and a line to the transformer.
|