|
|
Wire electrical discharge machining at production of tools for working of wood
Sedláček, Jiří ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
My thesis is aimed at the application of wire electical discharge machining technology in the production of woodworking tools. All of this in the conditions of Vydona company. There is a theory of machining method plus a well-aranged division of cutter tools for wood in the introduction. The practical part describes in detail the procedur of cutting shaped plate out of tungsten carbide. As a result of the technical and at the same time the economic evaluation is an establishment of hourly rate for machine.
|
|
|
Trends in use of non-conventional technology for electrical discharge machining.
Mouralová, Kateřina ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
The aim of this dissertation are future trends of electrical discharge machining in conditions of a small tool factory. In the introduction is presented the theory of non-conventional machining. The practical part is focused on valuation the current level of electrical discharge machining, the importance of the use in a tool Nástrojárna Ryšavý. It also compares the level of leading global manufacturers of electrical discharge machines and future trends of electro-discharge technology.
|
|
|
Technology of wire electrodischarge
Tichý, Štěpán ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
This master’s thesis deals with technology of wire electrical discharge machining in theoretical and practical level. Theoretical part of the thesis explains in detail the principle of electrical discharge machining, describes functional parts and settings of a current wire EDM machines and also the possibility of using method for production of specific parts. Practical part of the thesis solves manufacturing of gearing on pinion manufactured by wire cutter EXCETEK V650 and statistically evaluates precision parameters on surfaces of the carriers taken by specific technological conditions with the same machine.
|
|
|
Rationalisation of electrospark machining
Janhuba, Tomáš ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
The diploma thesis deals with rationalization of EDM in the Schaeffler plant. The introductory part discuss about this type of machining, while its main purpose is the explanation of material removel process and conditions that the process must meet. It’s a summary of information that needs to be known before implementation of rationalization. The following part of the work describes an initial state of electroerosive workshop. It explains operation of the workshop or what machines are used there. In this part are also written the problems that the workshop have. After that there is part which is focused on the suggestion of solution and testing of that suggestions. The conclusions of that and whether the processess were racionalized are summarized in the technical-economic evaluation chapter and in conclusion chapter.
|
|
|
Electroerosion wire cutting of technical ceramics
Habovštiaková, Mária ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
The presented diploma thesis deals with the issue of wire electrical discharge machining of SiSiC ceramics. The first part explains the principles of electrical discharge machining, describes the WEDM technology and presents the properties of the advanced ceramics. The second part consists of a detailed analysis of the cutting process of eighteen samples obtained with systematically changing process parameters. Based on the obtained results from EDX analysis, SEM electron microscopy and topography there was performed an analysis of the influence of process parameters on the cutting speed, surface roughness, kerf width and number of wire breaks with usage of the selected brass cutting wire. From the evaluated results it was possible to select a combination of parameters that ensured a stable machining process.
|
|
|
Electroerosion machining of materials used in the aerospace industry
Zubáková, Alexandra ; Mouralová, Kateřina (referee) ; Kalivoda, Milan (advisor)
This diploma thesis deals with the issue of electroerosion machining of materials used in the aerospace industry. The introductory part presents the layout of aerospace materials and the methods by which they can be machined. The next chapter describes the basic principles of EDM. The experimental part is focused on electroerosive cutting of NIMONIC 263 alloy. The greatest emphasis was placed on determining the influence of the cutting wire material on the rate of contamination of the surface layer of the workpiece. The quality of the machined surface was assessed depending on the used wire and the selected machining parameters.
|
|
|
Production technology for selected mold part
Mešina, Matej ; Ohnišťová, Petra (referee) ; Zemčík, Oskar (advisor)
The primary concern to be dealt with within the framework of this bachelor thesis is the concept of the variant of production technology of the mold core. The work deals marginally with the wire electrical discharge machining. Second chapter is concerned with the analysis of current production technology. Two new variants of the production technology process are introduced in third and fourth chapter. The last part of this work is dedicated to the techno-economical assessment of the proposed variants
|
|
|
Technology of wire electrical discharge machining
Galko, Adam ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
This thesis talk about practical application of wire electrical discharge machining (WEDM), which belongs to electro-erosion machining methods. This thesis is focused on the production of cutting dies produced by company FOR MIX s.r.o. Trenčín. We can consider the cutting die as a typical product of company´s product program. In the practical part of this diploma thesis, there is detail of technological aspects and operating costs for wire electrical discharge machining technology in specific condition of company FOR MIX s.r.o.
|
|
|
MODERN TECHNOLOGIES IN WIRE ELECTRICAL DISCHARGE MACHINING THE METAL ALLOYS
Mouralová, Kateřina ; Karpíšek, Zdeněk (referee) ; Pokorný, Peter (referee) ; Píška, Miroslav (advisor)
The dissertation is focused on streamlining production on wire electric discharge machine during cutting metal alloys, specifically low-alloy steel quality by CSN 41 4220. The first part contains a study of the current and modern technologies EDM wire cutting. The second part is focused on identifying key parameters to influence the WEDM process, a detailed analysis of the machined surfaces of samples and wire electrodes used for cutting. The result of this work was to explore the possibility, whether by performing planned experiment and subsequent evaluation in the future to determine exactly setting the key parameters influencing the process of WEDM.
|
|
|
Technology of wire electrodischarge
Tichý, Štěpán ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
This master’s thesis deals with technology of wire electrical discharge machining in theoretical and practical level. Theoretical part of the thesis explains in detail the principle of electrical discharge machining, describes functional parts and settings of a current wire EDM machines and also the possibility of using method for production of specific parts. Practical part of the thesis solves manufacturing of gearing on pinion manufactured by wire cutter EXCETEK V650 and statistically evaluates precision parameters on surfaces of the carriers taken by specific technological conditions with the same machine.
|
guest ::
