|
|
Strength design of pipe
Jahodová, Miroslava ; Buzík, Jiří (referee) ; Horsák, Libor (advisor)
The subject of this thesis is strength design of pipe connecting furnace of continuous catalytic reforming with reactor. First is realize analytical design of individual parts according to ASME VIII, ČSN EN 12952-3 a ČSN EN 13480-3. It is also design and optimize supporting pipe using Caesar II. At the end of work is creating isometric documentation.
|
|
|
Dedusting of cooling conveyor for agglomaration( Conveyor output 130t/h)
Hanzlík, Václav ; Fiedler, Jan (referee) ; Skála, Zdeněk (advisor)
The main aim of this thesis is to propose a suitable dusting cooling conveyor technology for agglomeration South in Ostrava. The first part deals with the actual sinter production and its influence on air. It further describes the most commonly used separation device in agglomerations. In the second part of this thesis there is designed a scheme of piping line for suction air and there is also described the choice of abatement equipment and associated equipment. The work includes also drawing plans of the proposed solution.
|
|
|
Furnace design
Stříž, Michal ; Nejezchleb, Radek (referee) ; Nekvasil, Richard (advisor)
This master´s thesis deals with issues of tube furnaces in the process industries, especially with a design of a transfer pipeline, which is one of the main parts of the furnace. According to the requirements, designed pipeline is stress analyzed using the two pipeline programs Japar and Caesar II, that are briefly described. In addition to this design several variants of analysis are performed and the results are compared. Comparison helps to explain the diversity of the programs. For example, the effect of elbows on the stress analysis. The master´s thesis also describes the factors that affect the working life of the furnace.
|
|
|
Design of process unit pipeline
Butek, Petr ; Gottvald, Jakub (referee) ; Nekvasil, Richard (advisor)
The master’s project deals with the pipeline systems of process unit. The design of the industrial pipeline is usually extensive and complex task interwoven with a lot of technical disciplines. Diploma thesis is focused on the strength calculation of the pipeline specified by the ČSN EN standard. The main goal of the calculation is appraisal of the most stressed parts under operating and testing conditions. The diploma thesis is handled with the key aspects that influence the overall concept of the pipeline design as well as the strength calculation.
|
|
|
Design and lay-out of high pressure pumping station.
Václavík, Tomáš ; Franc, Zdeněk (referee) ; Habán, Vladimír (advisor)
The aim of diploma thesis is design and lay-out of high pressure pumping station with plunger pumps for splash of scales from slabs of hot-rolled. Theoretic (introduction) part of this thesis contain description of formation of scales and description of ways how it is possible remove these scales. And this part contains also explication of effect of water jet on solid material. The practical part of diploma thesis is focused on design of pumping station including of dimensioning of machinery. Part of this work is also technical documentation for proposed pumping station and specification of main machines and devices.
|
|
| |
|
|
Marketing strategy proposal
Jánský, Radek ; Kouřil, Karel (referee) ; Chalupský, Vladimír (advisor)
The goal of this Diploma Thesis was the detection of the potential trends of manufactural and business activities in manufactural division AZ KLIMA, Ltd and to suggest the appropriate measures .The starting situation of this company is described in an extensive analytical part. The output is a summary of its strenghts and weakness aspects, opportunities and threats. The suggest of strategy is presented by an extended marketing mix. The emphasis is placed first of all on product sphere. There are mentioned technological and organisational impacts of commencement of production of bolting and welding ducts, spiral tubes and ending distribution elements. Afterwards there are suggested methods of economy in manufactural process, market targeting and personal impacts. At the end there are outlined the time-dependent implementation harmonogram of suggested strategy, feasibility control and evaluation of expected benefits.
|
|
|
Building heating gas boiler and solar water heating
Jelínek, Ondřej ; Vrána, Jakub (referee) ; Treuová, Lea (advisor)
Proposal for heating and water warming of rehabilitation centre. The first part of the project analyses given topic, the matter of calculating heat losses and heating elements proposal. It also deals with heat source for heating, fuel for boilers and condensation boilers functioning. The second part covers the technical design of the theme and the third part deals with the solar system.
|
|
|
The efficiency of heat distribution
Vích, Pavel ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
This diploma thesis focuses on the analysis of heat loss of heating distribution in the industrial area. The aim of this labor is to determine heat loss heat distribution kept in non manholed canal and evaluate economic return to build a local source of heat for the office building. For this building is in two variants resolve the reconstruction of the existing heating system. For the first variant is designed the local gas condensing boiler and for second variant existing central heat source. The experimental part of this labor compares the measured and calculated values of boundary conditions of hot-water pipes kept in non manholed canal.
|
|
|
Renovation of sewer network with CIPP methods
Holeš, Petr ; Helcelet, Marek (referee) ; Raclavský, Jaroslav (advisor)
Diploma thesis makes a summary of today’s state of CIPP methods designed for sewer relining. Thesis presents classification of CIPP methods between other NO-DIG technologies. Then CIPP methods are divided into groups according to the material used for the liner, applied resin, installation method and curing method. Designing of the CIPP liner used for sewer renovation is also part of this diploma thesis. The result of the theoretical part of this work is a table, which states suitability of particular methods for use in a sewer of specific technical properties. Practical part of bachelor’s thesis is dealing with the analysis of defects of an existing sewer in the city Přerov. Analysis was done due to the camera examination provided by the company Wombat s.r.o. Later the table developed in theoretical part was applied, and then the suitability of use of all parameters of CIPP liners was commented. At the end the plan of works is designed, with the plan for pumping of water included.
|
guest ::
