|
|
Uninterruptible Power Supply
Mrázek, Petr ; Harabiš, Vratislav (referee) ; Chmelař, Milan (advisor)
The thesis deals with Uninterruptible Power Supply (UPS) and associated problems of backup power in case of unexpected outages of electricity. Start of work is dedicated to limitation of the electricity supplies, as well as their causes and consequences. Furthermore, brief history of UPS and subsequently distinguish between UPS’s architectures. There is also a description of the energy sources such as batteries, flywheels or fuel cells. Part of thesis describes security of electricity supply in health care facilities, including requirements for emergency power. The own design of UPS is described in the end.
|
|
|
Analysis of switched-mode LED drivers
Stehlík, Ota ; Vyskočil, Pavel (referee) ; Kubíček, Michal (advisor)
The aim of this thesis is to design, produce and verify the operation of two different LED drivers for automotive industry, which controls the ultra-bright white LEDs. At the beginning of a brief introduction explaining the principle of operation of LEDs. Furthermore theory describes the functions of all three basic drivers involved as buck, boost and buck-boost. Based on the requirements are selected ICs suitable for this implementation, theoretically described their block diagrams including the individual diagrams and eventually these samples are made, revived and measured their parameters.
|
|
|
Power converter for artificial power net
Picmaus, Michal ; Procházka, Petr (referee) ; Patočka, Miroslav (advisor)
Diploma work deals with a converter design for an artifical power net. There is described analysis of possible solving of this converter. Next there is contained dimension of components force circumference converter, design of filtres and converter regulator. Project deals with simulation of dynamical qualities for an output changer device in settings Matlab Simulink. In this work there is even a design power board alternator, wakers and directing of alternator.
|
|
|
Inverter for arc-welding
Vaculík, Josef ; Hejkrlík, Jan (referee) ; Červinka, Dalibor (advisor)
This bachelor project deals with the explanation of working principle of pulse source used as the source of welding current. It explains the activity of used single acting transmit converter and mention the others examples of converters types. Next there are mentioned powerful constructed parts of source, so input filter, pulse transformer, output inductor and powerful semiconductors components together with necessary parts converter. There are mentioned output current sensor and boards of powerful and directive parts of converter.
|
|
|
Brightness control of light sources
Dostál, Lukáš ; Vorel, Pavel (referee) ; Huták, Petr (advisor)
Thesis is focus on brightness control of lighting sources. The first objective of the thesis is to determine basic concepts and explain interrealationships among particular magnitudes of lifting technology. Further is necessary describe functionality, particular light sources and thein possibility of use in practise. There is also outline issue of darkfall of particular types of sources and their evolution. The other part of thesis compare energy output of lighting sources and describe their possible future development. Further this thesis deals with options of regulating of brightness for LED moduls. There is also proposal of acceptable amperage regulator LED moduls including its software - microcontrol ATMEL AVG. Microcontrol ATMEL AVG Tiny 13 is programme in C language within computer environment AVR Studio 4 and will be record through the use of AVR Dragon.
|
|
|
Non-filtering applications with current and voltage conveyors
Horáček, Lukáš ; Herencsár, Norbert (referee) ; Mišurec, Jiří (advisor)
This thesis is focused on using non-filtering applications with voltage and electric current conveyors. Conveyors may be used both for filtering and for non-filtering applications. They are basic elements of many modern electric circuits and operational amplifiers. First of all, I had described what the conveyor in general is, its historical development, which types of them we can meet with and its availability in integrated circuits. Then I focused on circuits which are subject of this thesis. Namely they are: functional transducer, rectifier and integrator. These circuits were analyzed and simulated by computer software. After this I designed their realization and performed experimental measurement.
|
|
|
Device for induction heating with a power of 2,5kW
Krist, Petr ; Vašíček, Adam (referee) ; Vorel, Pavel (advisor)
This thesis deals with designing of an induction heating of small iron parts. This device should be primarily designed for a farrier practice or an artistic blacksmithing. Considering the practice, the referential heated iron part will be a horseshoe. The basis of this device is a power inverter with serial resonant circuit connected to inverter as a load. This thesis contains designing and development of electrical and mechanical parts of whole device. It means control circuits, resonant circuit, box for heated part, etc. At the end of this thesis is realization of the device, electrifying, optimization and testing. During the test the horseshoe was heated close to demanded temperature.
|
|
|
Four-electrode impedance plethysmograph
Port, Martin ; Kolář, Radim (referee) ; Chmelař, Milan (advisor)
This master’s thesis is an introduction to the measurement of changes in tissue impedance of blood flow by impedance plethysmography. Other chapters deal with the kinds of plethysmographs and their principles. The aim is to draft four-electrode impedance plethysmograph to measure changes in tissue impedance depending on blood flow. First, describe the individual blocks of the medical instrument. The practical part of the master’s thesis involves circuit design four-electrode plethysmograph. Given that a very important role in its function plays a constant current source operating at a frequency of 60kHz, this subset was implemented and verified its correct function. To draw component schemes used program EAGLE version 5.10.0.
|
|
| |
|
|
Switching supply source 5,5kV/4,3kW with silicon-carbide semiconductors
Gabriel, Petr ; Patočka, Miroslav (referee) ; Vorel, Pavel (advisor)
This thesis is about to introduce the development of switched power supply with output voltage of 5,5 kV and power of 4,3 kW. This thesis directly follows the outputs of two previous semester projects. Main task is about to finish the development of remaining printed circuit boards and perform launching of all parts of developed power supply. Next necessary task is about to assemble a functional prototype of the supply using the developed parts, performing a series of measurement supply’s parameters and creating of technical documentation of mechanical part. There are all stages of supply’s development included in this thesis. From the first part, that describes various types of converters, through the design of all the supply’s parts, to final implementation of functional prototype. There are the results of measurement supply’s parameters at the end of this thesis.
|
guest ::
