|
Concentration of cobalt in wastewater and its removal using a constructed wetland
PIVONKOVÁ, Eliška
The presented bachelor's thesis discusses monitoring of wastewater in a vegetation wastewater treatment plant in the village Slavošovice, Czech Republic and an efficiency of cobalt removal from wastewater. Cobalt concentration in wastewater was determined using the atomic absorption spectrometry. The analyzed wastewater samples were taken from different parts of the constructed wetland's system in the period from March to September 2015. The obtained results enabled to calculate the efficiency of cobalt removal from wastewater.
|
| |
|
Determination of platinum group metals in soils the city of Brno
Pavlíčková, Ivana ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
The diploma thesis focuses on identifying the presence of platinum in soil samples by absorption spectroscopy. The work is divided into two parts, the theoretical part is focused on the occurrence and behavior of platinum in the environment, the fundamental chemical and physical properties of platinum, its importance in catalytic converters in cars, on solid phase extraction method and the method for the determination of atomic absorption spectrometry. The second part is the practical part, focused on the determination of the platinum amount in the soil samples in the city of Brno.
|
|
Determination of platinum in Brno's agglomeration
Dvořák, Rostislav ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
This thesis is focused on the determination of platinum in samples of road dust and soil by atomic absorption spectrometry. The theoretical part describes the basic physical and chemical properties of platinum, platinum function in automotive converters and its behavior in the environment. In the experimental section summarizes the methods used to decompositions samples, concentration of the analyte and the main results of the measurements.
|
|
Study of organs of mice in inhalation experiments
Vrlíková, Lucie ; Diviš, Pavel (referee) ; Dočekal, Bohumil (advisor)
The diploma thesis is devoted to study potential risks for living organisms resulting from inhalation of nanoparticles of chosen heavy metals. The main aim of this work is the investigation of organs from experimental white mice after their guided inhalation of lead nanoparticles. The samples of liver and lungs from these animals are taken in time periods during the inhalation experiments and processed by specific methods for their evaluation. After pressurized microwave assisted decomposition of selected samples of mice organs in high purity concentrated nitric acid the content of lead is determined by atomic absorption spectrometry with electrothermal atomization. Furthermore, the changes are monitored using the microscopy of histological slides stained with hematoxylin-eosin. The results of both approaches are evaluated and compared within the frame of this work.
|
|
The issue of determination of tin in environmental matrices
Bušinová, Markéta ; Sommer, Lumír (referee) ; Doležalová Weissmannová, Helena (advisor)
This diploma thesis deals with the retrieval of the content of tin in environmental media, the circulation in them and possibilities of the determination of tin in the environment. Summarizes available information on the properties of tin and its compounds, the occurrence and circulation of tin in environmental and determination of tin in environmental media, attention is paid to the determination of total tin content using method of ET-AAS. The experimental part is focused on optimization methods of determination for the ET AAS and selection of a suitable extraction procedure for determination of total tin content in soils and sediments. The best procedure for the determination of tin in the ET-AAS was applied to samples of soil, sediment and water. As the optimum matrix modifier was chosen the solution of Pd (NO3)2 in 5% ascorbic acid, the optimum pyrolysis temperature was 1400 °C and atomization temperature 2400 ° C. Neither of extraction procedures examined were found to be an appropriate procedure for the determination of tin in environmental samples and further work is necessary to optimize the method of separation.
|
| |
|
Corrosion degradation of magnesium alloys in SBF solutions
Ročňáková, Ivana ; Horynová, Miroslava (referee) ; Doležalová Weissmannová, Helena (advisor)
Nowadays, magnesium alloys are used in many sectors of human activity, particularly in the aerospace and automotive industries, due to a combination of good mechanical properties and low density of magnesium. Recently, however, the attention is paid to the possibility of using magnesium alloys in the medical field, mainly due to the chemical properties of magnesium. The diploma thesis is focused on evaluating of the corrosion behavior of AZ31alloy and AZ61 alloys in SBF solutions that are solutions simulating body fluids. The alloys were subjected to immersion test in Hank’s solutions for time span from 24 to 1008 hours. The corrosion process was evaluated based on several factors: alloy composition, time and pH changes. The thesis also describes in detail the methodology for establishing magnesium and zinc by method of flame absorption spektrometry (F AAS). The determination of aluminum was carried out by atomic absorption spectrometry with electrothermal atomization (ET AAS).
|
|
Spectrophotometric determination of Chromium(III) with organic reagents
Nevrlá, Jana ; Komendová, Renata (referee) ; Sommer, Lumír (advisor)
The theoretical part of this master’s thesis is mainly focused on the physical and chemical properties of chromium, its toxicity and possibility of entering of various forms of chromium into the environment. There are also described the most common analytical methods for determination of chromium in water, including ways of modification and preconcentration water samples. The aim of experimental part is the optimalization and assessing the conditions spectrophotometric determination of Cr(III) by selected organic reagents (chromazurol S, eriochromcyanine R, 4-(2-thiazolylazo)resorcinol) and their comparison with the determination of total chromium, as Cr(III), using atomic absorption spectrometry with electrothermic atomization. The analytical procedure for spectrophotometric determination of chromium with chromazurol S, which was found to be most suitable and ET-AAS, were applied to real water samples.
|
|
Determination of mercury in selected fish species and in fish products
Kroupová, Kateřina ; Ing.Tomáš Gregor, Ph.D. (referee) ; Diviš, Pavel (advisor)
Theoretical part of the master thesis deals with the occurrence of different mercury species in the environment and describes analytical methods used for determination of mercury in biological samples. In practical part of the master thesis mercury concentration in 14 samples of selected fish and fish product was determined using single purpose absorption spectrometer AMA 254. Measured results were statistically processed and consulted with EU legislative norm.
|