National Repository of Grey Literature 153 records found  beginprevious120 - 129nextend  jump to record: Search took 0.05 seconds. 
Design of structures with FRP reinforcement
Matušíková, Anna ; Vácha, Jaroslav (referee) ; Štěpánek, Petr (advisor)
This diploma thesis presents available FRP software for calculating load bearing capacity of the structures reinforced with FRP and compares them between each other. Furthermore theory and algorithm of my own software is presented here. Load bearing capacity of structures which are reinforced with non-metallic reinforcement and loaded by combination of normal force and bending moment can be solved by my programme. Effects of high temperatures on the concrete structures can be included in the calculation. In the second part of the thesis is calculated load-bearing capacity and deflection of the real beam reinforced with FRP reinforcement and load-bearing capacity of member with FRP reinforcement with effect of elevated temperature. This has been done using my software. Comparison of results from hand calculation and laboratory load-bearing testing is done at the end. This laboratory testing was accomplished by Institute of Concrete and Mansory Structures at our faculty.
The temperature profile of the power switching device of low voltage for different operating conditions
Mejzlík, Tomáš ; Valenta, Jiří (referee) ; Dostál, Lukáš (advisor)
The heat generated in a circuit breaker can be transmitted in two ways: Either through metal parts of current path to conductors outside of device or through plastic parts or air of chassis. The accuracy of the simulation depends on the accuracy of the 3D model and all his parts and it also depends on precise definition of materials with precise definition of electrical and thermal parameters. Electrical circuit breaker has various source of the heat which results in raising temperature of the device above the level of environment. Heat sources are: 1) Joule’s loss of the circuit breaker current path. 2) Heat loss in a bimetal, which is used for thermal release. 3) Resistivity of contacts. This thesis deals with static state of thermal analysis so the sources do not include transient heat source for switching OFF and switching ON. Electrical circuit breakers are made in smaller and smaller forms however their electrical parameters are not decreasing with size. There is logical conclusion that there is more heat on the same unit size which makes thermal analysis of circuit breaker one of the most important part of development.
Application of Conductive Inks and Low Temperature Sintered Pastes in PCB Production
Kolek, Andrej ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
The present masters's thesis informs about the development and application of low-temperature sintering pastes in the manufacture and assembly of PCB components of the enclosing lead-free using nanoparticles of metals and their compounds. Lead-free brazing technology which s using in the present time, which has its drawbacks, however, and thus gaining other appropriate alternatives that seek to replace or further refined lead brazing. The introduction of the theoretical part inform about retrieval method of the type, composition and properties of low-temperature sintering pastes consisting of metal nanoparticles and their compounds. This section describes and explains the reaction mechanisms taking place during the sintering process. The end of the first chapter is dedicated to nanotechnology and production of nanoparticles and their compounds for the needs of the low-temperature sintering and possible related problems. Folowing section is devoted to examples of practitioners of the application and use of low-temperature sintering pastes and tests with which to assess the characteristics and quality of the related sintering conection. At the end of the thesis is a summary perspective and the use of low-temperature sintering technology nanoparticle past into the future. The experimental part is devoted to the application of conductive ink on the base of graphite for the production of 1V, 2V and 4V structures and their electroplated by the copper. There were created technological processes of 2V and 4V structures and test proposed methodologies resistance conductive theme to environmental influences. Filling pasta was tested in implementing 4V structure. There were made microsections various technological applications and their results were processed and evaluated.
Thermal analysis of induction machines using Ansys Workbench
Kučera, Petr ; Makki, Zbyněk (referee) ; Janda, Marcel (advisor)
The aim of the master thesis is introduction with software Ansys Workbench and calculate the thermal field arroud the induction machine. After introduction with the software was bulit model of induction machine and there were simulated various thermal calculations at operating conditions. They were measured on a real induction machine in laboratories.
Thermal source with tuneable temperature gradient
Masár, Pavol ; Drexler, Petr (referee) ; Steinbauer, Miloslav (advisor)
This work deals with design of thermal source of panel shape for scientific biological application. Panel has adjustable surface temperature and thermal gradient. The first part of this work concern with design and numerical modeling of the thermal system, application of materials and arrangement of thermal and cooling devices – Peltier elements. Second part of this work is about construction of the panel and experimental measurement.
Computation of thermal network of switchgear type UniGear and comparison with the real temperature rise test
Rybka, Michal ; Tůma, Drahomír (referee) ; Orságová, Jaroslava (advisor)
The Master’s thesis deals with thermal network computation of UniGear type switchgear and it compares the calculated results with the real temperature rise test. The thesis describes both electrical and non-electrical characteristics of such a switchgear as well as its application in variol fields of industry. Description of switchgear auxiliary equipment is obvious part of the thesis. Modelling of current carrying track in software environment of Autodesk Inventor and preparing of this current carrying track for thermal network calculation in software environment of ANSYS follows. Main part of this thesis is presentation of thermal analysis results and their comparison with the real temperature rise test.
Thermal conductive plate with controlled thermal field
Masár, Pavol ; Král, Bohumil (referee) ; Steinbauer, Miloslav (advisor)
This work deals with design of thermal source of panel shape for scientific biological application. Panel has adjustable surface temperature and thermal gradient. The first part of this work concern with design and numerical modeling of the thermal system, application of materials and arrangement of thermal and cooling devices – Peltier elements. Second part of this work is about construction of the panel and experimental measurement.
Utilization of ANSYS Workbench program at power electrical engineering
Partl, Tomáš ; Aubrecht, Vladimír (referee) ; Kuchyňková, Hana (advisor)
In its first part this Master´s thesis describes creation of electronic database design in Raster Design 2009 program as an effective form of storage only for paper documentation. The second part of my thesis provides calculation of primary and secondary winding of current instrument transformer of over-current conduit through the winding and influence on other parts of transformer i.e. error of transformer or increasing magnetic induction core and others. The last third part is focusing on usage of ANSYS Workbench in power electrical engineering. The thesis shows specific example of warming of current instrument transformer (thermal analysis) and comparing the results with theoretical (calculated) values.
The utilization of computer graphic in power electrical engineering
Bzduch, Pavel ; Aubrecht, Vladimír (referee) ; Kuchyňková, Hana (advisor)
The aim of this work is to describe news in Autodesk Inventor Professional 2008. In second part of the work there are described the possibilities of technical drawing in Autodesk Inventor. In third part there is mentioned basic information about ANSYS Workbench. There is thermal simulation of asynchronous motor too.
Synthesis, properties and product of hydration of strontium yttrite cement
Florian, Ondřej ; Šoukal, František (referee) ; Ptáček, Petr (advisor)
The master thesis is focused on the preparing a binder system based on strontium ytritte cement and examining the physicochemical properties of the obtained system. The course of the process was evaluated using methods calorimetry, thermal analysis, X-ray diffraction analysis and scanning electron microscopy.

National Repository of Grey Literature : 153 records found   beginprevious120 - 129nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.