National Repository of Grey Literature 20,132 records found  previous11 - 20nextend  jump to record: Search took 0.75 seconds. 

Puppies and young dogs nutritions
Šabatová, Kateřina ; Hučko, Boris (advisor) ; Plachý, Vladimír (referee)
Puppies and young dogs nutritions Summary In this work I have attempted to summarize the most important aspects in nutrition of puppies and dogs in growth. The introduction describes the digestive tract and also the changes that have occurred due to domestication. Next is explained the importance of nutrition and water in nutritional requirements of a dog. Important are needs of nutrients and energy that are necessary to maintain the provision of the necessary vital functions. The basic components of food are proteins, saccharides, lipids, minerals and vitamins. I explain the necessary proportions, the amounts and the possible consequences of their lack in food. I focus on essential fatty acids, which in recent years are subject to frequent explorations and their pros and cons are not yet fully understood. I also mention ballast and significant specific active substances. Nutrition of pregnant and lactating females is often neglected, but for puppies it is a very crucial period. The influence of nutrition of pregnant females to the size and weight of newborn puppies has been proved. Further I deal with nutrition of puppies immediately after birth, I explain the composition of colostrum and its effect on the immunity system of the puppy. I also compare ratios of nutrients in the colostrum and milk. Further, I deal with the feeding of the individual at the time of weaning and in different growth periods. There are many possibilities of feeding puppies from after weaning until adulthood described in books. With the new knowledge about nutrition the ways of feeding our dogs have inevitably changed , but also the dogs' nutritional requirements have changed due to the conditions where and how they live and what their nutrient needs are according to their sport, breeding or other use. Currently, there is a possibility of a commercially produced complete nutritional diet or home-prepared fresh food - cooked or raw- barf. In the last chapter, I summarized possible aspects of malnutrition and its potential consequences. I described the most common problems associated with inadequate nutrition of growing dogs such as obesity as well as malnutrition, which also adversely affects the individual. The influence of proper nutrition of the puppy on its growth is clear. If we neglect the nutrition of the dog in the first two years of its life, the consequences are often irreversible.

E-learning support for lifelong training
Žažo, David ; Husa, Jiří (advisor) ; Marek, Marek (referee)
The bachelor thesis deals with the process of creating an e-learning course for the personnel operating with the camera system of the municipal police in Chomutov. This course is created on the base of need to introduce the controlling software IndigoVison Control Center to the current employees and also to the new employees. During the course, the participants get familiar with the features, options, and operating principles of the software. At the end of the course, the knowledge gained by completing the course is validated by the final test. The entire course is evaluated, based on test results and interviews with the participants. The theoretical part deals with e-learning, it mentions the advantages and disadvantages as well as the specifics associated with adult education. The practical part is a detailed presentation of the course, which is fully implemented in an environment of MoodleCloud and it is practical result of the thesis.

Subsidy Support of the Sustainable Waste Management
BEDNÁŘOVÁ, Renata
The subject of the dissertation is the issue of the waste management with special emphasis on the recycling of the construction and demolition waste. The recourse is an analysis of the key instruments regulating the activities and behaviour of market operators in this field toward fulfilling all-society priorities and principles of the sustainable development, where special accent is put on the area of subsidy policies and programmes. The aim of the dissertation is to analyse and evaluate the setting of the selected subsidy programme in terms of economic and ecological efficiency with the emphasis on the assessment of the impact on the recipient. The subject of the research will be a priority axis 4 "Improvement of Waste Management and Removal of Old Environmental Burdens" within the Operational Programme Environment 2007 - 2013. In the literature review basic concepts and important definitions are defined, followed by the comprehensive and complex searches of the problematics from different angles of view. First of all, the global aspect of environmental protection is discussed, broader historical, legal, economic and political contexts, that are essential fundament for understanding the current and future challenges both globally regionally, are summarized. Hereafter, a more detailed description of the situation of the European Union is followed, then the overview is completed by a detailed view at the state of the problematics in the Czech Republic. Subsequent chapters are devoted to a detailed analysis of the waste management sector, again in terms of global, European and national standpoint, in the end the view is focused on the key issue of the dissertation problematics of construction and demolition waste. In the application part the fulfilling of the stated objective of the dissertation through four defined hypothesis is solved. Hypotheses verify the efficiency and appropriateness of the setting of the system of subsidies in the frame of the monitored programme. The emphasis is imposed on the assessment of the impact of the allocated subsidies to the private entities on their economic and environmental efficiency.

New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.

Test Application Methodology Based On the Identification of Testable blocks
Herrman, Tomáš ; Plíva, Zdeněk (referee) ; Racek, Stanislav (referee) ; Kotásek, Zdeněk (advisor)
The PhD thesis deals with the analysis of digital systems described on RT level. The methodology of  data paths analysis is decribed, the data path controller analysis is not solved in the thesis. The methodology is built on the concept of Testable Block (TB) which allows to divide digital component to such segments which can be tested through their inputs/outputs, border registers and primary inputs/outputs are used for this purpose. As a result, lower number of registers is needed to be included into scan  chain - border registers are the only ones which are scanned.  The segmentation allows also to reduce the volume of test vectors, tests are generated for segments, not for the complete component. To identify TBs, two evolutionary algorithms are used, they operate on TB formal model which is also defined in the thesis.

Právní a zdravotně sociální aspekty činnosti OSPOD jako ustanovených opatrovníků v zámu nezletilých dětí
BORSKÁ, Jana
The Czech Republic as a signatory of the Convention on the Rights of the Child has vested the practice of state administration in the field of care for minor children to municipalities with extended powers, where the protection of the rights and legitimate interests of minor children is safeguarded by state authorities of social and legal protection of children (ASLPC hereinafter). These authorities are incorporated to the extent laid down by the Act on Social and Legal Protection of Children (Act No 359/1999 Coll., as amended). The position and roles of ASLPC and their competence and jurisdiction are also regulated by the same act. The position of workers of these authorities and its legal embodiment is equally important. Regarding professionality, there are high demands on these workers. In the Czech Republic, significant changes in legislature have been made over the past three years. These amendments have led to the strengthening of the rights of minor children and to the establishing of new tools for their protection. In connection with the adoption of new substantive regulation of family law, which is now exhaustively dealt with by the Act No 89/2012 Coll., the Civil Code, new procedural rules have been established regarding protection of rights of minor children. Such procedural legislation includes (apart from the long-existent Act No. 99/1963, the Code of Civil Procedure) the Act No 292/2013 Coll., on Special Civil Proceedings. The decision-making regarding minor children has been vested mainly by the state into the competence of courts. The courts appoint the locally relevant ASLPC as a guardian who then represents the interests of minor children. The purpose, interwoven with and derived from the first one, was to explore the opinions of selected social workers of ASLPC and of district court judges regarding the defined problems occurring during the work of ASLPCs and courts while protecting the interests of minor children. These particularly include: the use of the tool of precautionary measure; problems of different territorial jurisdiction of courts and ASLPCs; processing of complaints regarding bias in various phases of the proceedings; professional training of workers of ASLPC It is evident from the proposals of both judges and ASLPC workers that it is necessary to unify territorial jurisdiction. The courts are suggesting the priority criterion of the address where the child mainly resides. ASLPC workers suggest the official permanent residence as the prime criterion. Bias causes problems in all phases of proceedings. It is obvious that courts take differing approaches towards the solution of this problem (some courts solve the problem of bias complaints filed by the parties while other courts do not) and for ASLPC workers it is difficult to assess how to act when such complaint is raised against them. The training of ASLPC workers - workers are obliged to educate themselves and their employer is obliged to finance such training. Not all ASLPCs are able to provide training in the required extent - due to financial reasons (the average costs of education of one employee pose from 9,169 to 13,400 CZK annually and they cover approximately 6 days of training). The heavy work-load caused by insufficient numbers of ASLPC employees prevents them from completing such compulsory training. As part of the examination of the "participation of a collision guardian in court proceedings" it has been found out that irregular participation of the worker in the proceedings (absence from participation in appeals proceedings); incomplete reports (directed to courts) from surveys in families. Based on comprehensive examination of the problems of territorial jurisdiction, it was recommended that requests are independently recorded and financial compensation is provided for ASLPCs who are requested to represent minors in front of courts, to draft proposals for precautionary measures.

Digital Repository in Practice - More Than Just a Data Storage
Andrejčíková, Naděžda
Research generates ever more data. For guidance in these data a digital repository of published results of science and research should serve as well as a digital repository containing these scientific data. Metadata are very important in this process. They can link related data from completely different external sources. In our paper, we focus on the use of external resources in building institutional repositories.
Slides: idr-1036_1 - Download fulltextPDF; idr-1036_2 - Download fulltextPDF
Video: idr-1036_3 - Download fulltextMP4

Improving labour productivity: How to determine standard time for performing specific tasks in the selected organization
BARTOŠKOVÁ, Martina
This bachelor thesis focuses on the standard time needed for specific tasks in the selected organization, as well as on the appropriate methods for its determination. The findings serve as a basis for the formulation of measures which should be taken to improve labour productivity. The methods include the standardization of tasks, time study and computer-based data analysis (Microsoft Excel spreadsheets). The theoretical part of the paper discusses the nature of job production, the methods appropriate for the calculation of standard production time and the ways to ensure efficient work and time management in the given factory. Apart from these, a complete description (history, facility layout, pre-production and production stages, machines and materials) of the selected organization is provided to serve as a background for the case study presented in the practical part. This includes the list of production tasks, production time tables and time standards along with materials necessary to facilitate production. The aim of the thesis is to help the organization improve its labour productivity and provide it with the algorithm which can be used to determine production time for similar orders.

Business Plan of a Small Enterprise Providing Services
BOČANOVÁ, Eliška
This bachelor thesis is dedicated to develop a business plan for the establishment and the development of small enterprise providing services in the fashion industry. The thesis is divided into two parts the theoretical part and the practical part. The theoretical part involves the basic terminology about business. It defines structure, contents and the principles of building development a business plan too. The practical part is completely prepared business plan for enterprise start-up. It is focused on the market analysis dealing with internal and external environment of the company, such as Porter five forces analysis and analysis of strenghts and weaknesses. Then a financial plan with initial costs, anticipated revenues and from the default operating result follows. The practical part includes opening balance sheet of corporate assets and liabilities. This business plan can eventually serve as a basic for real setting up a business.

Effect of a graduate of field of study Special Education - tutorship in practice of providers of social care
SALABOVÁ, Jana
Theoretical part of the thesis is divided into 4 main chapters. First one deals with the helping professions generally, their definitions and definition of the Special education - Tutorship branch of study per se.It also briefly touches the subject of readiness of the future graduates to deal effectivelly with the challenges of a career in the field of social services. Chapter number two is called Special education and it defines the subject of special education itself, it's purpose and inner structure. Third chapter focuses on social services. It brings up it's definition and types and forms of social services.It also contains the examples of the institutions which fall into this category and it's providers. Chapter number four, which happens to be the last one in the theoretical part of the thesis, covers the role and purpose of graduates of the special education - tutorship studies. It brings up the definition of a social worker, necessary prerequisites as well as beneficial personality traits and feautures. In a subchapter of chapter four is a short description of a pedagogue tutor. Definition who he actually is, who are proper candidates for this position, what are desired personality traits we look for in tutors and the actual content and purpose of their work in institutions providing social services. The end of chapter four is dedicated to a position of a social worker. His activities, the position and definition of a personal assistant and again personality traits needed for a successful career in this field. The objective of the practical part of the thesis is to describe working of Special education - tutorship studies graduates in practice. Particularly their experiences "from the field", how do they evaluate the level of skill of fresh graduates during their first encounters with the reality, how satisfied are they with their choice of a career so far and what was their motivation to pursue such career. Practical part of the thesis includes qualitative research. To meet the above objectives, data collection technique had been chosen using a structured interview with the respondents, who were graduates of Special education tutorship studies. You can tell by the results of this thesis that graduates in the field of social services apply mostly to lower positions as a social service workers, even though they are qualified to perform as a social workers. The age of clients with whom the respondents work ranges from childhood to senior. The motivation that led those questioned respondents to the decision to choose the area of social services varies. Some reported that they were influenced by the actual practical experience during their studies at the university, when both the work itself and their enthusiasm for the target group played role. Others expressed they had previous experience working with people with disabilities or they just wanted to acquire new experiences. Also, involvement of a family member and their previous education was a motivation. Job satisfaction is evident from observed data, and it also contributes to work done accurately and responsibly. Personal benefits for the respondents according to findings are usually their usefulness at work, new experiences they are getting and last but not least advances of their clients. As the biggest advantage the respondents usually mention variability of their work, target group and the clients in itself and the fact, that their work is highly satisfying and they basically work in a very pleasant team of individuals. On the other hand, not exactly satisfying financial reward and challenging working hours are mentioned as disadvantages. Special education - tutorship studies - the branch they've studied, is by the majority of respondents considered to be beneficial for them and they especially highlight practical impact of practice they completed during their studies and which included visits to various relevant institutions.