|
|
Technology of Production Parts Console
Rusník, Tomáš ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
This thesis describes the complete technology solution of front driving axle console production by machining. The console is part of the self-supporting structure of the tractor and is produced under conditions of large engineering company. Introduction describes the prduction technology of component. The main part is devoted to the technological process of production and selection of appropriate cutting tools. Technical and economical evaluation of machined part is mentioned in the conclusion of thesis.
|
|
| |
|
|
Application reamers with cermet cutting edge and PVD rating
Lučaník, Aleš ; Plíšek, Jiří (referee) ; Kouřil, Karel (advisor)
The introductory part of this bachelor´s thesis provides definitions of basic accuracy parameters, quality of machined surface and requirements on accu- racy of holes. Further work describe the current technical level of available reaming tools of global manufacturers in terms of technological aspects, tool materials, tool geometry and the main structural elements. The final part deals with designing, implementing and evaluating an experimental verification of usable properties of prototypes newly developed reaming tools in collaboration with the company HAM-FINAL.
|
|
|
Solution technology of part "víko" in the condition of a middle-sized company
Kavan, Petr ; Prokop, Jaroslav (referee) ; Kalivoda, Milan (advisor)
The diploma thesis is concerned with evaluation of actual production technology of part “hydraulics cover” and with design of new, progressive variation machining of this part. Solution is focused at first on rationalization of cutting tools and choice of suitable cutting tools. An effort is to achieve shorter production time and decrease costs on production of component. With this problem is related alteration of technological documentation and technical economic evaluation for determination return rate of investments into progressive cutting tools.
|
|
|
Proposal of production technology for a machine part using a drilling jig
Havránek, Pavel ; Kalivoda, Milan (referee) ; Chladil, Josef (advisor)
The aim of this bachelor thesis is to characterize the selected component, to evaluate the technological design. Further the drilling jig is designed and economical assessment is done. The first part of the thesis deals with the technological assessment of the production of drilling parts and structures. This is followed by familiarization with the technologies used in drilling and component manufacturing. Next sections summarize the rules for the construction of the products and their division. Conclusion of the thesis is devoted to the economic assessment.
|
|
|
Concept of reaming technology
Štěpánek, Martin ; Sedlák, Josef (referee) ; Kouřil, Karel (advisor)
The diploma thesis deals with the design of the hole-making technology for hydraulic components that are specific for its high requirements on size and shape accuracy. The aim of diploma thesis is to compare the productivity, efficiency and accuracy of reaming with two different reamers – the solid carbide reamer and the newly designed reamer that combines two cermets on cutting part of the tool. In the practical part, the data analyses and calculations were made. It was discovered that the newly designed tool brings economic benefits while the qualities of final hole are improving or remaining at the same level.
|
|
|
An Experimental Study of the Impact of Passive Forces of Cutting on a Machined Surface
Slaný, Martin ; Janáč, Alexander (referee) ; Bumbálek, Bohumil (referee) ; Píška, Miroslav (advisor)
This dissertation thesis focuses on the evaluation of modern machine tools, especially tools for finishing operations, with which the effect of the passive force components on the machining process is evaluated. The thesis will examine the analysis of creating chips and circumstances that accompany this process and substantially involve the formation of a new surface. The analysis of the process of the recording of the power load of the MT3 tool takes place in the experimental part of the thesis. MT3 is a reaming head intended for finishing holes at high cutting speeds (100-200 m.min-1) with removal of small cross section AD (0.024 mm2) chips. Particular attention is paid to the newly created profile from the surface after machining and evaluation of changes in geometry and loading of the cutting edge, which is significantly reflected in the establishment and the development of passive forces.
|
|
|
An experimental study of the impact of passive forces of cutting on a machined surface
Slaný, Martin ; Píška, Miroslav (advisor)
This dissertation thesis focuses on the evaluation of modern machine tools, especially tools for finishing operations, with which the effect of the passive force components on the machining process is evaluated. The thesis will examine the analysis of creating chips and circumstances that accompany this process and substantially involve the formation of a new surface. The analysis of the process of the recording of the power load of the MT3 tool takes place in the experimental part of the thesis. MT3 is a reaming head intended for finishing holes at high cutting speeds (100-200 m.min-1) with removal of small cross section AD (0.024 mm2) chips. Particular attention is paid to the newly created profile from the surface after machining and evaluation of changes in geometry and loading of the cutting edge, which is significantly reflected in the establishment and the development of passive forces.
|
|
|
Integrity surface at reaming with modern reaming head MT3
Havlík, Luboš ; Plíšek, Jiří (referee) ; Kouřil, Karel (advisor)
The Masters thesis is focused on surface integrity at reaming with high productive reaming head MT3 made by HAM-FINAL. Theoretical part of thesis aims at analyse of the most frequently evalueted surface integrity parametrs and its possible influence on functional performance of machined components. Next theoretical parts are aimed at reaming process, reaming tools characteristics, detailed reaming head MT3 characteristics and its aplication in company Sauer Danfoss. The aim of experimetal part of thesis is surface integrity of holes reamed MT3 during its tool life evalation.
|
|
|
Effect of size impact on surface integrity while reaming with modern reaming head MT3
Rybařík, Jaroslav ; Kouřil, Karel (referee) ; Slaný, Martin (advisor)
The aim of this thesis is to design, implement and evaluate an experiment that verifies the influence the size effect on selected parameters of the surface integrity. For the experiment were used highly productive reaming head MT3 made by HAM-FINAL. Evaluation of the surface integrity was done in terms of the characteristics of the surface roughness, geometric tolerances and changes in microstructure. Furthermore, the influence of the depth of chips evaluated for changes in the feed force, cutting torque and changes in specific cutting energy. The theoretical part deals with the description of the size effect, characteristic reaming, surface integrity, preparation of material and identification of highly productive MT3 reaming head.
|
guest ::
