|
|
Manufacturing of aquaria Brno
Horáček, Jan ; Mikeš, Stanislav (referee) ; Nový, Alois (advisor) ; Bečkovská, Tereza (advisor)
The subject of this bachelor thesis was to design a new aquarium manufacture in Brno for Pavlica corporation. Project is based on architecture study done in subject AG035 Architecture design studio undertook in the sixth semester of bachelor´s study. The plot is located to the south of Brno in Horní Heršpice by the Sokolova Street. There are factory buildings in the wider neighbourhood but in the immediate area around the plot there are prevailing residential buildings and a railway. Civic facilities can be found in the walking distance. The area is classified as a brownfield intended for building. The plot has a slight slope in the direction of Sokolova Street. The building is designed in the shape of the letter “U”. Two story administration part and representative part dedicated to the public can be found in the front of the object. Main manufacture hall is connected to administration part and is linked to the exterior via section gate. Perpendicularly to the main manufacture hall is carpentry with storage and waste. The carpentry is also linked to the exterior via section gate. The section gates lead to manipulation yard in the back of the plot which is connected to Sokolova Street via road. There is a parking lot situated along this road. The façade of the building is created from advanced glass wall with designed support system. In the centre of the building is semi-public atrium with garden.
|
|
|
Production of aquariums Brno Pavlica
Čadová, Veronika ; Vostrejž, Dušan (referee) ; Boleslavská, Yvona (advisor) ; Bečkovský, David (advisor)
The topic of the bachelor thesis is a design of an industrial building for the Akvária Pavlica company. The design deals with documentation for obtaining a building permit and documentation of construction. The project is based on a previously developed architectural study for the subject AG035 and contruction study for the subject AG036. The assigned building parcel is located in the west part of Brno Horní Heršpice and slopes slightly to the north side. The parcel is situated near the local road of the Sokolova street. The main access to the parcel is also from the same street. The layout design of the plot contains a parking lot for employees and visitors, an seperated area for trucks and a garden area. At the moment the parcel mostly fits into the brownfields. The design of the new building consists of 3 functional units - exhibition space/showroom, facilities for administration and production space. The basic idea was to separate the units for the public from employees and vice versa. For this reason, the production and exhibition unit is located in "stand-alone" functioning units. The administration is located on them as the 2nd floor. That creates a walk - through area to the garden and the main entrance to the building. The construction system is a steel frame structure based on the reinforced concrete step footing foundations covered by flat and sloped roofs. The steel frame structure is supplemented by Ytong blocks. The Trimoterm vertical panels are used throughout the building as a facade covering. The mainly used materials for construction are steel, glass, concrete and metal. The main aim of the design was to create a well-functioning spatially separated but overall compact space, which will ensure both quality product production, as well as a pleasant working space for employees and a functional space for public visitors.
|
|
|
ACQUISITION PRODUCTION BUKOVANY
Salajová, Barbara ; Myslín,, Jiří (referee) ; Dýr, Petr (advisor) ; Kolář, Radim (advisor)
The bachelor thesis deals with documentation for obtaining a building permit and documentation of construction of aquarium production. The proposed building is located in the village Bukovany in the district Hodonin. The plot is in the eastern part of the village. Land is slightly sloping. There is no built-up area, only a municipal cemetery and a football field. The building is divided into two main parts, which are interconnected by staircase space. The first part is two-storey The first floor is located showroom and facilities for employees. On the second floor there are offices for administrative workers. This part is made of brick Porotherm and flat roof. The area around this part is decorated with greenery and there is also parking for visitors and employees. The second part is a one-storey aquarium production hall, partly embedded in the ground. There is also a waste storage area and a carpentry area in the lobby. There is also a technological background of both buildings. The construction system of the production hall is prefabricated, based on monolithic feet. Kingspan façade panels are the connecting elements for the entire plant. The roof of the hall is gabled with a slight slope of 3%. The space behind the hall serves as an access point for trucks.
|
|
|
Aquaria Production Bukovany
Nováková, Pavla ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The bachelor’s thesis is based on an architectural study worked up in the fourth semester of the bachelor’s study during the subject Ateliér architektonické tvorby III – AG033. The aim of the subject was the design of an industrial object designed for the production of aquaria on an assigned parcel in the village Bukovany near Kyjov. Not only was there a need for the design of production areas, but it was also necessary to design areas for the production of related furniture, an administrative area and a showroom for the presentation of products. The objective of the thesis was the creation of a construction study, the documentation for the execution of the project and an architectonic detail for the designed building. The assigned parcel is located on the edge of the village of Bukovany, in a relatively calm part of the village surrounded by a football field, cemetery and a former agricultural area. The designed object is formed of 6 separated areas – an administrative area, an exhibition and entry area, a production area, a woodworking area, a storage area and a technical area. The building is formed of a ground floor and one underground floor. Structurally the building is designed on a 6-meter module and the mixed structural system is used. For lighting the areas continuous saddle skylights are used, which switch to vertical elements on the edges of the building. The surroundings of the building are landscaped, including a resting area with a small lake on the southern part of the parcel.
|
|
|
Manufacture of aquariums
Lebedev, Ilya ; Myslín,, Jiří (referee) ; Boleslavská, Yvona (advisor) ; Brzoň, Roman (advisor)
The bachelor thesis deals with documentation for obtaining a building permit approval and documentation for building aquarium factory. The work is based on earlier created study of the subject AG033. Bukovany is a village in Hodonín district in the South Moravian Region of the Czech Republic. This plot is almost near the eastern border of the village. The land is sloping, relatively narrow and long. The shape of the estate greatly influenced the location of the building and the connection to the existing roads. There is good availability for supply and shipping. The factory is divided into four above-ground interconnected buildings with different functions. All objects are without basement and have only one floor. On the southern side of the plot is located a representative administrative part of the building, which surrounds the main factory building. It is possible to drive into the main production hall by a truck and to handle large and heavy glass panes by means of a bridge crane. The manufacturing process of gluing has high demands on the illumination of the premises, therefore it is illuminated by the Lightway Maximus roof skylights and the windows around the perimeter of the hall. This production hall is directly connected to the warehouse and joinery space. The construction system of the production objects is prefabricated, based on monolithic nibs. The part of the building, which serves as a warehouse has a brick walls. The eastern and most sloping part of the plot is filled with greenery. There is an artificial small lake in front of the administrative part of the building.
|
|
|
Aquaria Production Pavlica
Suchanek, Tomáš ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
This bachelor thesis deals with documentation for gaining building permit approval and documentation for building aquarium factory. Thesis is based on earlier created AG032 course study. Popovice is located in Uherské Hradiště county, this parcel of land is located near south border of the county. The estate is flat and relatively narrow; therefore, the shape of the estate has influenced the placement of individual objects. The estate is near railroad station. Because of the near highway E55, the supply and dispatch accessibility is good. The factory is divided into four above-ground objects that are mutually dilated according to the production requirements. All objects do not possess a cellar. The first object is located in the southern part of the estate. In the first object there is a product showroom and administrative section with employee facilities. Due to showroom’s atypical shape, this object is partially made of reinforced concrete and partially made of Porotherm system construction blocks. The production hall is located behind this object. The access to the production hall is possible with a truck, also it is possible to manipulate heavy blocks of glass with a crane. The manufacturing process of glueing has high demands for light, therefore, the object is equipped with roof belt light well and large glass walls. This production hall is connected to waste storage unit in the east side and wood processing building on the north side. Also, there are technological facilities for both objects. The supply and dispatch area is located between the main production hall, waste storage unit and wood processing building. The construction system of production objects is skeleton, prefabricated and based on monolithic nibs. The light wells and roof are made of steel. Waste storage unit’s load-bearing system is made of bricks. Kingspan white colour facade panels are the main connecting elements throughout the whole factory. Behind the factory there is park greenery with
|
guest ::
