|
|
Rainwater harvesting in an industrial building
Vacek, Jan ; Bárta, Ladislav (referee) ; Vrána, Jakub (advisor)
Diploma thesis contains a design the plumbing and gas installations in the industrial building. The theoretical part deals with the use of rainwater in the building as the process water and the experimental determination of the flow rate and water needs for the manufacturing and storage hall with built-office. The calculation part deals with the design of variants of plumbing and gas installations in the building manufacturing and storage hall with built-office. The practical part contains a design and project documentation of selected variants plumbing and gas installations in the manufacturing and storage hall with built-office, and the use of rainwater in this type of building.
|
|
|
Civic amenities building
Gyepesová, Angelika ; Svoboda, David (referee) ; Berková, Petra (advisor)
The aim of the diploma thesis is the design of sports centre with nearly zero energy consumption. The thesis is consist of three parts. First part is focused on architectural and structural design. Second part is focused on building services designs. Third part is focused on acoustic assessment of the building. The building is located in Šternberk on a sloping terrain. It has two floors, irregular floorplan and flat roof. The capacity of the building is 104 people. In the building there are rooms for table tennis, spinning, TRX and a gym. There are also massage rooms and a sauna. The building includes a buffet with refreshment and a shop with nutritional supplements. The structural system of building is combined. The structural framework consists of prefabricated columns and beams. The internal and external load-bearing walls are designed from lime-sand blocks and the partition walls are from aerated concrete. The floor and roof structures are designed of prestressed concrete. Heating in the building and the water heating is secured by two ground source heat pump and a stationary condensing gas boiler. Ventilation is provided by air-handling units with heat recovery. Cooling is secured by one of the heat pumps. Electricity consumption is partially covered by photovoltaic panels on the roof. The building has incorporated rainwater storage tank for watering greenery. The third part of this diploma thesis deals with room acoustics and the closely related issue of reverberation. Part of the work is a drafting of acoustic modifications of the sports rooms based on manual calculation. The project aims to improve the acoustic properties of the premises by incorporating elements that have sufficient sound absorption. These are perforated false ceilings, acoustic wooden cladding with different perforations and green walls.
|
|
|
Energy-saving building of kindergarten Lískáček
Jakubec, Marek ; Vyhlídalová, Karolína (referee) ; Počinková, Marcela (advisor)
The aim of my diploma project is to design a nearly-zero energy kindergarten. Building is located in Brno – Starý Lískovec. It´s a single-storey, detached building. It has 2 classes with bathrooms and locker rooms for 40 childrens . Other rooms are: headmaster´s office, kitchen, staff facilities and technical room. Load-bearing walls are made from masonry and non-load-bearing walls are from adobe blocks. Floor slab is made from reinforced concrete. There is a flat green roof with photovoltaic panels. The building is heated by heat pump and uses mechanical ventilation with heat recovery. As a third part of my project, I´m comparing three diferent heat sources. The criteria according to which the resources were assessed are the score from the energy performance of building certificate, the amount of emissions and the spatial complexity of the technologies.
|
|
|
Energy efficient building of kindergarte in Soběšice
Růžičková, Eliška ; Wierzbická, Helena (referee) ; Vaščáková, Alena (advisor)
The main goal of the master’s thesis is to design a new building of the nursery in Brno-Soběšice. It is one-storey building. This floor is divided to two same parts. In each of them is day room, sleeping room, office, bathroom, cloakroom for children, cloakroom for teachers with shower and toilet and stock for beds. Also there is director office, toilet, hallway, utility room, room for cleaners, sink and stocks. The vertical loadbearing structures are designed from Porotherm ceramic blocks and the hollow concrete blocks. The building is insulated by a contact thermal insulation system ETICS. The horizontal loadbearing structures and the staircase are designed from reinforced monolithic concrete slab. The roof is flat with extensive greenery. The whole construction are based on foundation passports. The building site contains also an outdoor car park with ten parking spot and garden with climbing frames. The project was performed in Autocad and visualization was performed in ArchiCad and Lumion. All constructions comply with valid standards and regulations. Master’s thesis is divided to three parts. In the first part A it deals with the construction design of a building for a building permission. It contains architectural-building solutions, building physics, situation drawing, reports, building design solutions and fire safety solutions. In the second part B it deals with the design of technical equipment of buildings. It includes the design of sewerage system, water, gas, photovoltaic panels, lighting, ventilation and heating. In the third part C it deals possible systems for the use of rainwater. I described possible systems for the use of rainwater and developed a rough calculation for the selected system.
|
|
|
Low-energy building of kindergarten
Nečas, Lukáš ; Wierzbická, Helena (referee) ; Počinková, Marcela (advisor)
The aim of this project is to design a kindergarten with nearly zero energy consumption in Veřovice. The building is purposefully divided into three parts, where one part consists of locker rooms, an office, a food service and facilities for employees. The second part consists of 2 separate playrooms with a capacity for 40 children and the third part consists of the building services of the building. The project consists of three parts. The first part deals with the design of a building solution. It is a single-storey non-basement building, where the vertical load-bearing structures are made of Porotherm ceramic blocks and the horizontal load-bearing structures are designed from hollow prestressed Spiroll panels. The roof of the building is designed as a flat, warm, extensive green roof. The second part deals with the design of individual technical equipment. A ground / water heat pump is designed as a source of heat and cold. The building also uses mechanical ventilation, with heat recovery and the possibility of cooling selected rooms in the summer months. The third part consists of a detailed design of the heating system and contains a calculation of heat losses and a design of floor heating.
|
|
|
The Sanitary Instalation in Retirement Home
Minář, Lukáš ; Vrána, Jakub (referee) ; Wierzbická, Helena (advisor)
The goal of this diploma thesis is the design of the sanitary installations and gas main in the pension for pensioners. The building has three floors above ground and one underground floor. The building will be covered with a hiped roof. On the first floor there is the technical background of the building, Reception and kitchen with dining room. The basement is located just below the kitchen and serves as a cloakroom for kitchen staff. The building will be designed to use as much non-potable water as possible in the form of rainwater, which will be collected from the roofs. The theoretical part deals with the use of non-potable water as operating water in buildings. The calculation and project part deals with the gravity sewer system, plumbing and gas main in the building.
|
|
|
Sanitary installations and gas pipeline in the pension for seniors
Polách, Petr ; Vrána, Jakub (referee) ; Vaščáková, Alena (advisor)
This diploma thesis deals with the design of sanitary and gas installations in a boarding house for seniors and their connection to existing utilities. For the whole object there will be designed operating water supply with the use of rainwater. The diploma thesis also includes the design of a sewage pumping station, grease trap, light liquid separator, infiltration equipment and rainwater tank. The theoretical part is focused on the issues of gray water and rainwater and subsequent use as operating water. Computational part and project part solves sewerage distribution, water supply and gas pipeline in the specified object. It is a partially basement object with five floors. The object includes a surgery, a cafe and a shopping place.
|
|
| |
|
|
Use of rainwater in the company premises
Novotný, Jan ; Vaščáková, Alena (referee) ; Vrána, Jakub (advisor)
This diploma thesis deals with rainwater harvesting system in the company premises and the design of plumbing system in the newly built training center and storage hall. The new standard EN 16941-1 is described in the teoretical part. This standard deals with the use of rainwater. The experimental part solves the measurement of the non-potable water in this area. In the practical part, the acquired information is applied to the newly built object in the company premises. A project is created in the form of a technical report and drawing documentation for the use of rainwater and plumbing system.
|
|
|
Rainwater reuse in the sports and cultural center
Bardonová, Hedvika ; Vaščáková, Alena (referee) ; Vrána, Jakub (advisor)
The diploma thesis is focused on rainwater reuse in the sports and cultural center and elaboration of project sanitary equipment installation. The theoretical part of the thesis is focused on performance issues rainwater reuse in the buildings. In another part of thesis are drawn calculations with three variants of the design volume storage reservoir for rain water. The drawings are part of the project.
|
guest ::
