|
|
Multi-storey building
Cmajdálková, Alžběta ; Bajer, Miroslav (referee) ; Sýkora, Karel (advisor)
The subject of the master’s thesis is static design and assessment of the static load-bearing steel structure. The structure is designed for the site Brno. Specifically this is an eight-storey office building with a 54 x 12 m floor plan and a total height is 30,2 m. The steel structure is lovated betwrrn teo reinforced concrete towers secure for vertical transport. The structure is designed in three variants. In the one of them a steel frame with hingee attached elements. The ceiling structure is designed as composite steel and concrete structure.
|
|
|
Static solution of reinforced concrete structure
Mašek, Petr ; Kostiha, Vojtěch (referee) ; Zlámal, Martin (advisor)
This diploma thesis deals with study of feasibility of waterpark monolithic reinforced concrete structure with roof terrace. This structure has one underground floor, which has water park utility function and two above ground floors. On the roof is terrace with grass, mobile bar and with space to relax. Subject of this diploma thesis is the main loadbearing frame, which has span 32 m. The structure is assessed according to limit states of valid norms and also takes into account construction stages and time dependent analysis. The structure is calculated on beam and slab-plate structural models. Structural analysis and general drawings are done.
|
|
|
Information Centre
Kovář, Jindřich ; Štrba,, Michal (referee) ; Barnat, Jan (advisor)
This bachelor thesis is concerned with the static project and the consideration of the carrier steel construction of the information centre that means the two-storeyed building with the 24 x 24m extent. The project is solved by two options. In both cases, the steel basis with components united by articulated joints is concerned. These are pillars, supporting joists and ceiling beams that are composited with a concrete desk so that they ensure the position stability in a horizontal direction. The both options differ from each other by the position stability method in a vertical direction. In the first case, the vertical clamps avoid the deformation. In the second case, two frame constructions are designed for both yawing directions. The result was the choice of the first method that is discussed in a more detailed way further.
|
|
|
Design Analysis of the Load-bearing Structure of an Office Building
Novotný, Tomáš ; Šimek, Ondřej (referee) ; Švaříčková, Ivana (advisor)
The aim of the thesis is the design and assessment of selected reinforced concrete structures. Specifically, it is ceiling slab D1 above the 5th floor, reinforced concrete ribs P1 to P6 on the floor, a column over all floors S1 to S6 was designed and assessed, and a basement wall ST1 was designed in the basement. Using the Dlubal RFEM 5.28 program, a 3D model of the entire object was created and subsequently the internal forces of the individual elements were determined. The result of the work is a static calculation, shape and reinforcement drawings, which were made using the Autodesk AutoCAD 2022 program. The partial design and assessment of the above elements was carried out in the FIN EC program.
|
|
| |
|
|
Static analysis of steel structure
Čejková, Eva ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
The diploma thesis is focused on the comparison of the linear and nonlinear analysis of the steel structure and the resulting differences in both the numerical results and the time needed to obtain these results These analyzes are performed on a high-rise building, which has 10 floors and is used as an administrative building. Static model construction and calculations are performed in software system from Dlubal RFEM only loads for individual load cases are calculated manually.
|
|
|
Road bridge
Mezera, David ; Diviš, Dalibor (referee) ; Panáček, Josef (advisor)
The content of the thesis is to solve the relocation of railroad and bicycle path. I tis a bridge with five field. 2 studies were designed, one of which was elaborated within the Framework of this thesis. Was selected option no. 1 concrete prefabricated T-beams with coupled concrete slab The static model was created in Scia Engineer 18.1. and reports were processed manually, according to EC. The effects of wind, snow, acceleration and braking forces have been neglected.
|
|
|
Static solution of reinforced concrete structure
Mašek, Petr ; Kostiha, Vojtěch (referee) ; Zlámal, Martin (advisor)
This diploma thesis deals with study of feasibility of waterpark monolithic reinforced concrete structure with roof terrace. This structure has one underground floor, which has water park utility function and two above ground floors. On the roof is terrace with grass, mobile bar and with space to relax. Subject of this diploma thesis is the main loadbearing frame, which has span 32 m. The structure is assessed according to limit states of valid norms and also takes into account construction stages and time dependent analysis. The structure is calculated on beam and slab-plate structural models. Structural analysis and general drawings are done.
|
|
|
Multi-storey building
Cmajdálková, Alžběta ; Bajer, Miroslav (referee) ; Sýkora, Karel (advisor)
The subject of the master’s thesis is static design and assessment of the static load-bearing steel structure. The structure is designed for the site Brno. Specifically this is an eight-storey office building with a 54 x 12 m floor plan and a total height is 30,2 m. The steel structure is lovated betwrrn teo reinforced concrete towers secure for vertical transport. The structure is designed in three variants. In the one of them a steel frame with hingee attached elements. The ceiling structure is designed as composite steel and concrete structure.
|
|
|
Highway bridge over the II/464 road
Mezera, David ; Koláček, Jan (referee) ; Panáček, Josef (advisor)
The content of the thesis is to solve the relocation of the II / 464 road. It is a bridge with one field of post-tensioned concrete. 3 studies were designed, one of which was elaborated within the framework of this thesis. Was selected option no. 3 double plate-grinder construction. The static model was created in Scia Engineer 2.15 and reports were processed manually, according to EC. The effects of wind, snow, acceleration and braking forces have been neglected.
|
guest ::
