|
Production of the magnet holder
Kraval, Jiří ; Lidmila, Zdeněk (referee) ; Žák, Ladislav (advisor)
This project developed within the engineering studies of M-STG submits a proposal of a production technology of production of the magnet holder made of DC03. Based on a literary study of the problem of cutting, drawing, bending and calculations manufacturing of the component in a production die was suggested. The production die uses a normalised component and is tightened on PE 100 crank press with nominal drawbar pull 1000 kN. The conclusion of the thesis deals with the economic benefit of the suggested manufacturing technology.
|
|
The bend profile manufacturing by combination dies
Kummer, Michal ; Peterková, Eva (referee) ; Císařová, Michaela (advisor)
This diploma thesis describes the creation of the technological process for shelf clutch production. The shelf clutch will be made of material 11 321 by cutting and bending technologies. The first part of thesis includes the theoretical description of cutting and bending technologies. The second part contains calculations and design proposal of final combined cutting and bending tool and also selection of pressing machine. The thesis contains the unit block layout of the combined cutting and bending tool and detailed drawings of cutting and bending parts of the tool. The shelf clutch drawing is included too.
|
|
Fineblanking component and its manufacturing
Lata, Miroslav ; Peterková, Eva (referee) ; Šlais, Miroslav (advisor)
The diploma thesis deals with a propose of a new manufacturing technology of component called „KULISA“ drawing number 4-DP-05-10/01. The beginning of this work is prepared as a literary study about blanking. There are explained some basic concepts necessary to introduce a blanking topic. Other interest of this work is an assessment of actual state of conventional blanking technology which is being currently used for component production. With regard to the deficiencies of the existing method is proposed new technology of fine blanking. In the proposal is evaluated technological site of component construction and blanking tools are proposed with stress analysis included. Last part of the work deals with the economic evaluation, where is being compared efficiency of existing and new technology.
|
|
Design of manufacturing technology for trackpoint part
Garguláková, Lucie ; Šlais, Miroslav (referee) ; Peterková, Eva (advisor)
The disertation is focused to the technology of fineblanking. It is concerned to a production of part, which will be used as a mechanism for changing the position of seats in cars. The expected production series is 800.000 pieces per year. With reference to the quantity and demanded quality and also accuracy of blank is choosed precisely technology of fineblanking process with pressure edge. The part will be produced on triple-action press produced by Feintool AG Lyss. It is press GKP – F 160 with mechanical-hydraulic drive. This press and specialy create blanking tool produces two blanks per one action.
|
| |
|
Production of the valve seat
Kraval, Jiří ; Lidmila, Zdeněk (referee) ; Žák, Ladislav (advisor)
This project developed within the bachelor studies of B-STG submits a proposal of a production technology of saddle valve made of EN AW – ALMG3 material. Based on a literary study of the problem of cutting, drawing and calculations manufacturing of the component in a production die was suggested. The production die uses a normalised component and is tightened on LEN 63C eccentric press (produced by ŠMERAL Trnava), with nominal drawbar pull 630 kN. The conclusion of the thesis deals with the economic benefit of the suggested manufacturing technology.
|
|
Proposal for the production of variants of flat sheet metal parts with holes
Hamáček, Petr ; Vonka, Vladimír (referee) ; Špaček, Jindřich (advisor)
HAMÁČEK Petr: Proposal for the production of variants of flat sheet metal parts with holes. The final work of bachalors studies, 3th grade, academic year 2008/2009. FME VUT in Brno, Institute of manufacturing technology, department of metal forming and plastics. Bachelor work elaborated in the scope of bachalor studies of the branch B2307 submitted variants of production for flat sheet metal parts with holes. Theoretical part of the thesis is pointed to theory of cutting and description of personál cutting process. Shearing machine LEPP with shearing force 1000 kN is selected. Blanking puch and blanking are made from 19 class alloyed instrumental steels, heat treated according to graphical documentation. Cuttingin machine is using standardized components and it is solved by particular frame into eccentric machine. In the work there are implied necessary calcullations for both variants including economical evaluation.
|
|
Forming Technology of Thin Sheets
Musil, Zbyněk ; Žák, Ladislav (referee) ; Dvořák, Milan (advisor)
This bachelor‘s thesis deals with technology of mechanical working of the sheetmetals by cutting for rotary and non-rotary single parts. The first part deal with common dissertation about surface mechanical working, mainly about cutting and meaning of cutting gap in accordance with final cutting. The second part deals with transfer of the new pieces of knowledge from foreign technical literature of surface mechanical working. In the last part there is done an aplication on the particular component.
|