|
|
Evaluation of Selected Software Tools for Modeling the Leakage of Hazardous Substances in Accidents in the Chemical Industry
Hrušková, Veronika ; Martincová, Jana Victoria (referee) ; Adamec, Vladimír (advisor)
The thesis is aimed at the modeling of releases of hazardous substances to the designated software tools. The work consists of three parts. The first part is theoretical, which deals with hazardous substances and their legislation, accidents in industry, physical models of leakage and dispersion of hazardous substances and factors influencing their spread in the air and finally software tools. The second part, experimental, describes some software tools and their subsequent modeling. The third part is devoted to the results of modeling and analysis of selected software tools. The aim of the thesis is to analyze selected software tools for modeling the release of hazardous substances, to compare their explanatory power and potential use.
|
|
|
Localization of interesting points in power analysis
Vaněk, Stanislav ; Smékal, David (referee) ; Martinásek, Zdeněk (advisor)
Nowadays there are very high demands on security of cryptographic devices due to the increasing number of exploitation. Because of these reasons it is necesary to know the principles of security and their flaws. This thesis deals with the method of localization of interesting markers in current analysis. The aim of the thesis is to analyze this methods and their potential implementation in practise.
|
|
|
New Conceptions of Power Pulse Converters Using Extremely Fast Switching Semiconductors Based on SiC
Kuzdas, Jan ; Chlebiš,, Petr (referee) ; Drábek,, Pavel (referee) ; Vorel, Pavel (advisor)
This work deals with high power pulse converters (tens of kW) using new semiconductor devices of silicon carbide (SiC). Firstly the current state of the issue is analyzed. A research in a specific area of high power buck converters with pulse transformer follows. There was a strong emphasis on minimizing size and weight. The design process was focused also on reliability and robustness. To achieve the defined objectives, it was necessary to use the latest available switching transistors and diodes, and an unusually high switching frequency (100 kHz at a power of about 16 kW). Due to the high switching frequency, we achieved small size of pulse transformers and output chokes. An optimization of high-frequency pulse transformer with demand on minimum volume and weight of core and windings represents a separate theoretical part of the thesis. There have been proposed several analytical solutions of optimization problems, the results of which could overlap with the implementation in practice of switching power supplies. The combination of high switching frequency, fast semiconductors and the high power brings various parasitic effects to the power circuit. In the thesis, these parasitic effects are analyzed. Solutions which minimize or completely remove those effects were theoretically designed and successfully implemented, tested and finalized in experimental part of the work. Detailed description of the implementation of functional sample and series of validation measurements are included in the final part.
|
|
|
Charge Exchange processes involved in projectile-target interaction at low energy range studied by HS-LEIS
Bábík, Pavel ; Král, Jaroslav (referee) ; Průša, Stanislav (advisor)
This diploma thesis is focused on the charge exchange processes between projectile and target studied by the Low Energy Ion Scattering (LEIS) technique. Basic premise to investigate charge exchange processes is correct cleaning processes and proper settings of experimental instrument Qtac 100 placed in the Central European Institute of Technology (CEITEC) in Brno. Ion fraction expresses neutralization rate of the projectile. The parametr is investigated for clean and oxidized polycrystalline copper. Oxygen presence performs a significant part of reionization of backscattered neutralized projectiles.
|
|
|
Dispersion effects in high-speed optical networks
Filip, Tomáš ; Šporik, Jan (referee) ; Tejkal, Vladimír (advisor)
This bachelor’s thesis is focusing on optical transmission principal, its transfer mediums and furthermore also with focusing on its advantages and disadvantages. First half of this thesis focuses on adverse influences, which affect signal transmission in optical networks, on dispersion influences, especially on Polarization Mode Dispersion (PMD). Second half of this thesis deals with measuring of properties of optical fibers, largely chromatic and polarization mode dispersion, used methods and its principals. Furthermore, there are mentioned current compensation possibilities. The seventh chapter deals with optical route simulation in OptiSystem and testing chosen compensation methods for bit rate 40Gb/s. In the last chapter there are elaborated results of real optical route measurements for Masaryk University.
|
|
|
Measurement of extinction spectra of optically trapped plasmon nano-particles
Flajšmanová, Jana ; Jonáš,, Alexander (referee) ; Brzobohatý, Oto (advisor)
This thesis deals with the dark-field imaging and the optical spectroscopy of optically trapped plasmonic nanoparticles. The optical trapping and the characterization of a single particle or multiple nanoparticles as well are demonstrated. The number of the optically trapped particles can be estimated from the dark-field scattering intensity. Experiments show the presence of the interparticle coupling among trapped metallic nanoparticles which has not been observed in case of dielectric particles. The scattering spectra of the plasmonic nanoparticles were compared with theoretical models based on the Mie theory and the Discrete dipole approximation.
|
|
|
Application of Neural Networks for Human Face Localization
Libosvár, Jakub ; Řezníček, Ivo (referee) ; Španěl, Michal (advisor)
This bachelor thesis deals with detection and localization of human upright faces in images. At first, there are considered current methods. Then the face detection concept is presented. The thesis is focused on practical implementation of artificial neural network-based face detector designed by H. Rowley. Finally, training process and results of detector are discussed in more detail.
|
|
|
Analysis of Nanostructures by ToF-LEIS
Duda, Radek ; Král, Jaroslav (referee) ; Mašek, Karel (referee) ; Dub, Petr (advisor)
The presented thesis deals with the utilization of TOF-LEIS analytical method in the area of nanostructure analysis. A new procedure for depth profiling of the elemental composition of the sample, based on the alternate measurement with the DSIMS method, was established. The TOF-LEIS method is able to detect the interface between the layers before its mixing by the ion beam of the DSIMS method. Furthermore, a procedure of TOF-LEIS spektra modification was established to obtain the actual concentration of elements in the sample by reduction of a multiple collision contribution. By comparison of TOF-LEIS spectra with the results received by the DSIMS method the ratio of molybdenum and silicon ion yields was obtained. In the next section advantages of the TOF-LEIS method in combination with XPS during analysis of thermal stability of gold nanoparticles are presented. The mutual complementarity of both methods is shown and final conclusions are supported by electron microscopy images. The final section deals with a newly assembled apparatus for the TOF-SARS analytical method and shows its possibilities regarding the detection of hydrogen on the graphene.
|
|
|
Performance comparison of methods for design of experiments for analysis of tasks involving random variables
Martinásková, Magdalena ; Novák, Drahomír (referee) ; Vořechovský, Miroslav (advisor)
The thesis presents methods and criteria for creation and optimization of design of computer experiments. Using the core of a program Freet the optimized designs were created by combination of these methods and criteria. Then, the suitability of the designs for statistical analysis of the tasks vith input random variables was assessed by comparison of the obtained results of six selected functions and the exact (analytically obtained) solutions. Basic theory, definitions of the evaluated functions, description of the setting of optimization and the discussion of the obtained results, including recommendations related to identified weaknesses of certain designs, are presented. The thesis also contains a description of an application that was created to display the results.
|
|
|
Magnetic fields for biomedical experiments
Otýpka, Jan ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
In this work deals with magnetic fields for use in biomedicine. This solution involves the choice of the correct geometric arrangement of coils for generating magnetic field with a homogeneous distribution of magnetic induction of the widest possible area. The paper compares thre traditional types of coils, solenoid, toroid and Helmholtz coil. For Helmholtz and solenoid coil and is then carried out an analysis of the magnetic flux density in the inner space. Next part is devoted to electrical resonance in the LC circuit. This is then utilized for the development of pulsed magnetic field in the Helmholtz coil. It summarizes the theoretical and practical knowledge to design and construction of resonant converters. The end is devoted to the measurement of circuit parameters and verification of theoretical knowledge.
|
guest ::
