|
|
Testing of binders of thermal insulations for specific applications on technical appliances
Maňák, Jan ; Kulísek, Karel (referee) ; Petránek, Vít (advisor)
This work focus on testing alcali-activated binders for thermal insulation which could be used for special industry devices. In the beginning of this work is presented example of thermal energy storage where these specific alcali-activated materials can be used. Ensuingly two construction with thermal energy storage tanks are mentioned. Most of the interest aims on ageing and rheological properties of alcali-activated binder. Some rheological methods are also discussed. In the end of this work is added practical experience.
|
|
|
Preparation, characterization of trimethylchitosan and verification of its interaction ability with regards to variable charged ionic compounds
Bayerová, Zuzana ; Pekař, Miloslav (referee) ; Smilek, Jiří (advisor)
The aim of this thesis is to study the interactions of trimethylchitosan with oppositely charged substances with regard to its potential biomedical use. A substantial step before the study of interactions was a successful synthesis of trimethylchitosan, which was subsequently confirmed by characterization of the final synthesis product using physico-chemical methods (infrared spectroscopy, elemental analysis, nuclear magnetic resonance). The result product was subjected to negatively charged interactions such as sodium dodecyl sulphate as a representative of the ionic surfactant, alginate as a natural polysaccharide representative and Chicago Blue as a representative of the anionic dye. The ability to interact with sodium dodecyl sulfate and alginate was demonstrated by the formation of hydrogels, which were subsequently characterized by mechanical viscosity tests using rheometric properties. The positive affinity of trimethylchitosan for organic dyes has been investigated in agarose-based support hydrogel matrices for changes in transport and barrier properties.
|
|
|
Characterization of hydrogels based on photocross-linked derivative of hyaluronan
Hekrlová, Veronika ; Smilek, Jiří (referee) ; Klučáková, Martina (advisor)
This bachelor thesis focuses on characterization of hydrogels based on photocross-linked Tyramine-modified hyaluronan (HA-Tyr). In the first part of the work, swelling of gels in saline and porcine plasma was examined, in which the hydrogels swell significantly less. The second part of the thesis is focused on rheology. First, dependence of the apparent viscosity of precursor solutions on shear rate was tested. The apparent viscosity increases with the concentration of derivative and Mw. This trend can also be observed when measuring viscoelastic properties (the elastic modulus) in oscillation mode (strain sweep test). The elastic modulus can also be affected by using a higher concentration of the photoinitiator riboflavin (RF), higher radiation intensity or by longer exposure times, although the material can be degraded. The work also includes an ATP bioluminescence method cytotoxicity test, which proved that the methods used are safe for in situ application.
|
|
|
Slit flow rheometer for magnetic and non-magnetic fluids
Železník, Tomáš ; Vimmr, Jan (referee) ; Roupec, Jakub (advisor)
In this thesis was designed, manufactured and tested the fourth evolution of a slit-flow rheometer with another necessary parts, eg. rheometer`s holder, drive frame and important jig tools. The rheometer is able to measure rheological properties of magnetic and non-magnetic fluids at very high shear rates, which commercial rheometers can not reach. It is designed for 200 bar pressure and maximum load 15 kN. The construction of the slit-flow rheometer with it`s holder and drive frame improves user friendliness, accelerates change of the fluid sample and expands research opportunities thanks to a big space for additional adjustments. It is possible to use different length of the slit and thanks to a changeable inserts it is possible to change parameters of the slit (roughness of the walls, wall material, thickness of the slit). A part of this thesis was focused on illation of necessary equations for planning calibration measurements. Aim of these measurements is to obtain minor pressure losses dependence on Reynolds number for specific slit.
|
|
|
Utilization of various methods of porosimetry in investigation of internal structure of biopolymer hydrogels
Zahrádka, Jan ; Pekař, Miloslav (referee) ; Sedláček, Petr (advisor)
The main aim of the thesis was to select, optimize and test suitable methods for studying inner structure of hydrogel materials. The study of the size of pores with potential use in fundamental and applied research of these materials is the central focus of the thesis. Firstly, a literature search was done in order to collect basic information about usefulness of the individual methods. On the basis of this literature search, the experimental part of the work was divided into several steps. First, selected methods of conventional porosimetry (mercury intrusion porosimetry, BET analysis and DSC thermoporometry) were applied on reference porous materials and the results obtained by the individual methods were compared. The methods optimized with the use of these reference materials were then utilized in the analysis of porosity of model hydrogels based on polyvinyl alcohol. Based on the results of this analysis, the usability and benefits of the individual methods were discussed with respect to the sample preparation, time and financial demands, and also from the viewpoint of compliance of the determined pore sizes with the range of sizes declared for the physical PVA gels.
|
|
|
Experimental study on the release of active ingredients from gel matrices
Volhinava, Anastasiya ; Enev, Vojtěch (referee) ; Sedláček, Petr (advisor)
This thesis deals with the characterization of hydrogels containing humic substances and salicylic acid. Experimental study of the transport of active substances was performed from the gel matrix over the skin and synthetic membranes. During this work was writing literature review focused on the use of gels with humic substances in cosmetic, medical and pharmaceutical industries. The model humic hydrogels was prepared with salicylic acid and their characterization by basic methods of material analysis. These basic methods were and visual assessment of consistency during the preparation and rheology. The study of the release of active and humic substances was performed due to the vertical diffusion cells. The amount of released humic substance was characterized by UV-VIS method and the amount of released salicylic acid from gel matrix was determined by HPLC.
|
|
|
Automotive plastics with increased scratch resistance
Vida, Mikuláš ; Kučera, František (referee) ; Jančář, Josef (advisor)
The aim of this bachelor thesis was the investigation of changes of mechanical and rheological properties of nanocomposites based on PMMA, where filler was fumed silica of four types (different surface area and producer). The thesis focuses on the theoretical part of the current state of research, preparation and properties of nanocomposites. The solvent method was chosen for the preparation of nanocomposites, where silica was mixed with dissolved PMMA. Tensile mechanical properties were measured below Tg, while viscoelastic response was measured above Tg. Silica had not significant influence on the modulus below Tg, but above Tg (180 °C) both modulus, storage and loss, have increased with increasing silica content and with increasing frequency (0,1–100 Hz). The particle size and surface area of silica in a content of 1 % influenced storage modulus of nanocomposites more with respect to the content of 2 %. For samples containing 1 % showed that the significant role played particle size and surface area of silica. The greatest increase of storage and loss modulus of PMMA was reached for silica M-5 in content 1 %. All type of silica decreased tensile strength and strain with increasing silica content in the same way.
|
|
|
Thermoplastic extrusion of ceramic materials with ionic and mixed conductivity
Kaštyl, Jaroslav ; Matoušek, Aleš (referee) ; Trunec, Martin (advisor)
In the bachelor thesis, an overview of the existing literature focused on thermoplastic extrusion method was worked out and based on the findings; the conditions for extrusion of mixtures with zirconia were optimized in order to produce rods. Great attention was paid to dimensional and shape precision of ceramic parts. Two methods were applied when preparing the ceramic mixtures – mixing and dissolving. These methods have been compared on the basis of the results achieved in rheological measurements of flow properties, microstructure and dimensional accuracy of the sintered rods. Having verified the efficiency of mixture dissolving, this method was used to prepare mixtures with different contents of cellulose and binder.
|
|
|
High Pressure Viscometer
Skalický, Lukáš ; Hartl, Martin (referee) ; Křupka, Ivan (advisor)
The master´s thesis describes design of falling ball high pressure viscometer for measurements of rheological properties of liquids under high pressure and in the wide temperature range. The design is based on similar apparatuses, which are described in literature. The speed of falling sinker is measured by two optical senzors. Apparatus allows measuring of viscosity, density and optical observing structure of liquid. There was developed extensive program for the evaluation of measurement in Matlab. Apparatus is placed in the laboratory of the Institute of Machine and Industrial Design FME BUT and is used for research and creative activities.
|
|
|
Utilzation of physico-chemical analyses in study on microbial stress-response
Slaninová, Eva ; Pekař, Miloslav (referee) ; Sedláček, Petr (advisor)
This diploma thesis deals with the utilization of physico-chemical analysis in study on microbial stress–response. The main content of this work was to propose and optimize techniques and methods which are generally used in different industries. Two bacterial strains, Cupriavidus necator H16 and its mutant strain Cupriavidus necator PHB-4 producing polyhydroxyalkanoates (PHA) under certain conditions, were used as model microorganisms. Initially, microscopic teques such as transmission electron microscopy (TEM), cryo scanning electron microscopy (cryo SEM) and atomic force microscopy (AFM) were proposed and tested for the characteriozation of morphological differences of bacteria. Furthermore, viscoelastic properties of bacteria were determined and compared by the oscillatory tests of the rheology method considering another type of samples. Thermal analysis methods, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) in particular, focused on water transport and behavior of intracellular water influenced by presence of the granules of PHB in bacteria. The last technique, utilized in the study, was dynamic and electrophoretic light dispersion during pH changes for characterization of the surface properties of bacteria such as size, zeta potential and the isoelectric point.
|
guest ::
