|
|
Studium defektů v tenkých kovových vrstvách
Hruška, Petr ; Čížek, Jakub (advisor) ; Bulíř, Jiří (referee)
In the present work Mg films prepared by RF magnetron sputtering were studied. Variable energy positron annihilation spectroscopy (VEPAS) was employed for investigation of defects in the Mg films. VEPAS characterization was combined with scanning electron microscopy and X-ray diffraction in order to determine grain size, phase composition and texture. The effect of different deposition rate and deposition temperature, annealing, various substrates and film thickness on the structure and amount of defects present in the Mg films was examined. Defect studies by VEPAS showed that positrons in studied Mg films are trapped at misfit dislocations and at vacancy-like defects in grain boundaries and their density can be reduced by the deposition at elevated temperature. 1
|
|
|
Growth of single crystals and their basic characterization.
Hanzlíková, Kateřina ; Pospíšil, Jiří (advisor) ; Matěj, Zdeněk (referee)
Basic methods of single crystals growth have been studied in this bachelor thesis. The preparation of anatase and ruby single crystals has been realized by floating zone method in different compositions of the surrounding atmosphere. Crystallinity of prepared materials has been verified by Laue method. The same method has been used for orientation of the prepared single crystals along the principal crystallographic axes. The tetragonal structure of TiO2 has been proved by powder X-ray diffraction. The floating zone method has been found as a very suitable and effective method to grow anatase single crystals.
|
|
|
Mineralogical analysis of historical paintings
Čermáková, Zdeňka ; Hradil, David (advisor) ; Kanický, Viktor (referee) ; Artioli, Gilberto (referee)
Historical painted works of art have a very complex inner structure. The period painting technique led to the execution of a ground layer followed by several layers of underpainting and a top paint layer, over which a layer of glaze has been applied to increase the resistance to external wear. Each of these colour layers is composed of a dye or a pigment (or their mixture) bound by organic binder. Throughout the history, pigments were commonly prepared from minerals, either extracted from natural deposits or created artificially. In these heterogeneous layers containing both inorganic and organic components, undesirable degradation changes either driven by processes taking place directly in the colour layer or influenced by external agents may occur. Mineralogical approach, which focuses primarily on the structure of studied pigments, helps in the clarification of the occurring processes, in the determination of conditions leading to degradation as well as in the identification of original/degradation phases. Furthermore, it can be profitably applied in the micro- analysis of mineral pigments present in tiny micro-samples obtained from works of art, contributes to the artwork's provenance/authorship studies and the determination of regional provenance of the employed mineral pigments. This Ph.D....
|
|
|
Iron Functionalized Nanoparticles of Titanium Dioxide
Volfová, Lenka
Diploma thesis Iron Functionalized Nanoparticles of Titanium Dioxide Lenka Volfová 2017, ABSTRACT Iron-functionalized TiO2 were obtained by hydrolysis of aqueous solutions of titanyl sulfate with addition of ferric nitrate with ammonium hydroxide and the reaction filtered and washed with hydrogen peroxide. The colloid solutions thus prepared were lyophilized and the products were subsequently annealed at three different temperatures of 650 řC, 800 řC and 950 řC. The prepared doped materials were characterized by powder X-ray diffractometry, electron microscopy, infrared spectroscopy, Mössbauer spectroscopy, UV/VIS spectroscopy, thermogravimetric analysis and differential thermal analysis, and measurement of the specific surface area. Photocatalytic activity was determined by measuring of the decomposition of kinetics of 4-chlorophenol in an aqueous solution in the ultraviolet and visible area. For comparison of activity in the UV area and in the visible area were used a previously prepared highly photoactive specimen and standard TiO2 from Kronos, respectively. Keywords: Doped titanium dioxide, nanostructure, X-ray diffraction, electron microscopy, Mössbauer spectroscopy, suppression of photoactivity
|
|
|
Preparation of electrodes of Li-S batteries using inversely vulcanized sulfur
Trochta, David ; Kunický, Daniel (referee) ; Čech, Ondřej (advisor)
This work focuses on research of lithium-sulfur batteries, which are a promising battery type due to their theoretically high capacity and low environmental impact. Steering away from the commonly used elementary sulfur as the electroactive material of the cathode, inversely vulcanized sulfur with amorphic structure was utilized instead, while the manufacturing process of which was improved and optimized during the research. A series of samples of inversely vulcanized sulfur was synthesised, each containing a different ratio of the input precursors. X-ray diffraction was used to verify the amorphic structure of the material, which simultaneously also ruled out the presence of crystalline sulfur. Additionally, this work presents the results of Raman spectroscopy. At the same time, the possibility of utilization of Raman spectroscopy to identify the exact quantitative ratios of the used precursors was presented for the first time. Specific samples were also handpicked to undertake a dissolution test involving procedural solvents. Electrodes for electrochemical cells (Li-S battery) were manufactured based upon the knowledge gathered. The distribution homogeneity of the electroactive material of the electrode was observed through creation of an elemental map using the EDS technique. Electrochemical characterization of the selected inversely vulcanized sulfur electrode samples was measured using various methods: cyclical voltammetry, electrochemical impedance spectroscopy and galvanostatic cycling with potential limitation.
|
|
|
Investigation of defects in thin metallic films
Hruška, Petr ; Čížek, Jakub (advisor)
In the present work Mg films prepared by RF magnetron sputtering were studied. Variable energy positron annihilation spectroscopy (VEPAS) was employed for investigation of defects in the Mg films. VEPAS characterization was combined with scanning electron microscopy and X-ray diffraction in order to determine grain size, phase composition and texture. The effect of different deposition rate and deposition temperature, annealing, various substrates and film thickness on the structure and amount of defects present in the Mg films was examined. Defect studies by VEPAS showed that positrons in studied Mg films are trapped at misfit dislocations and at vacancy-like defects in grain boundaries and their density can be reduced by the deposition at elevated temperature. 1
|
|
|
An investigation of novel electroceramic structures for new sensor applications
Nan, Bo ; Liedermann, Karel (referee) ; Milne, Steven (referee) ; Button, Timothy William (advisor)
Piezoelektrické keramické materiály jsou široce používány v mnoha aplikacích a průmyslových odvětvích, nicméně tradiční materiály obvykle obsahují olovo, které je toxické vůči životnímu prostředí. Většina zemí proto zavedla zákony a omezení, které postupně minimalizují spotřebu olova a podporují výzkum v oblasti bezolovnatých kompozic, které by nahradily olověné protějšky. Bezolovnatá piezoelektrická keramika se tak stala žhavým tématem v posledních letech. Nicméně výzkumy na praktické využití bezolovnatých piezoelektrických materiálů jsou jen zřídka publikovány. V této diplomové práci byl vybrán jeden z nadějných kandidátů na piezoelektrickou bezolovnatou keramiku (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 za účelem zkoumání metody snížení jeho vysoké teploty slinování pomocí dotování uhličitanem lithným, kde syntéza prášku byla připravená pomocí techniky sol-gel. Výsledky byly srovnány s konvenčním práškem syntetizovaným v pevné fázi. Vzorky vyrobené ze sol-gel prášku dopovaného 0.5% hmotn. uhličitanem lithným a slinované při 1300 °C po dobu 2 hodin vykazovaly d33 = 447 ± 9 pC N–1, teplotu Curie 98.7 °C a velikost zrn 7.0 ± 0.3 m. Další důležitou otázkou pro aplikace bezolovnatého piezoelektrického keramického materiálu je jeho výroba v různých konfiguracích. Použitím techniky odlévání pásky a aditivních výrobních postupů byla piezoelektrická keramika zpracována do tří různých konfigurací (2-2, 3-3 a 1-3), aby se překlenula mezera mezi materiálovými vědami a materiálovým inženýrstvím. Pro dolévání pásky byly použity suspenze na bázi oleje a vody. Pro přípravu neslinutých keramických fólií bez trhlin, byly pro odlévání na bázi oleje vyvinuty uhlíkové suspenze s obsahem pevných látek 25% hmotn. a BCZT suspenze s obsahem pevných látek 65% hmotn. Problém práškové hydrolýzy ve vodných suspenzích byl vyřešen povrchovou úpravou prášku Al(H2PO4)3, což umožnilo, aby byly tlusté vrstvy bez trhlin odlety v jednom kroku. Tlusté vrstvy slinované při 1500 °C vykazovaly relativní dielektrickou konstantu 1207, dielektrickou ztrátu 0.018 při 1 kHz, remanentní polarizaci 7.54 µC/cm2 a koercitivní síla intenzity pole (Ec) 0.23 kV/mm při 3 kV/mm. Pro tvarování BCZT v konfiguraci 3-3 a 1-3 byla použita přímá metoda tisknutí inkoustu. Pro správnou úpravu tiskového procesu byla použita inkoustová náplň s viskoelastickým chováním obsahující 41.6% obj. pevných látek BCZT a se zpracovatelskými přísadami (HPMC ~ 2.4% a PEI ~ 0.03%). Vzorky v konfiguraci 3-3, slinované při 1500 °C, vykazovaly nejvyšší dielektrické a piezoelektrické vlastnosti, kde Curieho teplota = 86 °C, tan = 0.021, remanentní polarizace = 4.56 µC/cm2 a d33 = 100 ± 4 pC/N. Vzorky v konfiguraci 1-3 slinované při 1500 °C, které byly smíchány s epoxidem, vykazovaly dielektrickou konstantu 144 a dielektrickou ztrátu 0.035 při 1 kHz. Tato práce popisuje tvarování bezolovnaté piezoelektrické keramiky s vynikajícími vlastnostmi v pokročilých strukturách jako krok k návrhu pro moderní senzorické a energy harvesting aplikace.
|
|
|
Synthesis and characterization of sulfurized polymers for electrochemical power sources
Svoboda, Lukáš ; Kazda, Tomáš (referee) ; Čech, Ondřej (advisor)
Batteries based on lithium-sulfur technology have the potential to increase the amount of stored energy in comparison with current lithium-ion systems while maintaining the same weight. Achieving this goal is possible due to the high theoretical energy density of sulfur, which exceeds the values of other materials used in batteries. However, these batteries suffer from several failing, which still hinder the practical use. The use of amorphous sulfur instead of its crystalline form might lead to increasing of durability and charge efficiency. Inverse vulcanization of sulfur seems to be the perspective method for the preparation of polymer sulfur because it prevents its recrystallization and stabilizes amorphous sulfur. The aim of this thesis is the preparation and study of properties of materials made of inverse vulcanized sulfur.
|
|
|
Crystal and molecular structure study of garnets from selected localities of the České středohoří Mts.
Píšová, Barbora ; Skála, Roman (advisor) ; Laufek, František (referee)
Major and minor element contents of garnets from mantle peridotites and eclogites brought to the surface by volcanic rocks of the České středohoří Mts. were determined by an electron probe microanalyzer. Garnets are homogenous and their chemical composition corresponds to solid solution containing 65-71 % pyrope, other end members significantly present are almandine, uvarovite and grosulare. This method also help to discover polyphase inclusions chemically corresponding to amphiboles (pargasite, cummingtonite, magnesio-hornblende and katophorite). Next to amphiboles following minerals were found in inclusions: omphacite, carbonates, phlogopite, clinochlore, olivine, apatite, spinel group minerals, and sulfidic phases potentially close to pentlandite. Samples were also analyzed by powder X-ray diffraction. Qualitative phase analysis confirmed pyrope homogeneity. The refinement of crystal structure parameters was performed by the Rietveld method. Raman microspectroscopy showed shifts of individual bands in the Raman spectra compared to those of pure pyrope. Position of bands in spectra differs due to the substitution of Ca for Mg at the dodecahedral sites of the structure. Mutual positive correlations among elements Cr, Ca, Mg, Al, Si, Mn, Ti and Na were observed. Correlations were found also between...
|
|
|
Possibilities of utilisation of salt slags from aluminum production
Sedlačík, Martin ; Másilko, Jiří (referee) ; Opravil, Tomáš (advisor)
Bachelor thesis deals with characterisation of salt slag formed during melting of aluminium scrap in rotary furnaces and proposes options of utilization of this material as a secondary raw material. Samples from top, middle and bottom part of mould, where slag cools down after the melting process is finished, were tested. Aim of the thesis is also to evaluate the effect of air access during the cooling process on phase and chemical composition of salt slag. Particle size distribution, content of soluble substances and composition were examined in collected samples. Phase and chemical compositions of both soluble and insoluble portion of idividual fractions were determined using X-ray powder diffraction and X-ray fluorescence spectrometry.
|
guest ::
