|
Implementation of SPC into the manufacturing process
Simandl, Martin ; Nikodým, Lukáš (referee) ; Bartes, František (advisor)
The diploma thesis focuses on the introduction of statistical process control in selected manufacturing company XYZ. It is divided into a theoretical and a practical part, while the theoretical part deals with theoretical knowledge of SPC methodology and quality management. The content of the practical part is the design and implementation of the measuring and evaluation station, which will be used for statistical control of the SPC process, into the emerging production of chip machining.
|
| |
|
Software Development Processes Metrics
Verner, Jan ; Bartík, Vladimír (referee) ; Kreslíková, Jitka (advisor)
The importance of processes is growing. Processes are integrated into many areas of human work, where they help to organize all activities. This thesis aims on statistical approach to process behavior analysis. There are mentioned the basic process management issues in the beginning of this thesis. The main focus is on the techniques used during process analysis. There are mentioned approaches that are used to easily and effectively assess process behavior using process behavior charts and how to deduce proper steps from the analysis results to improve the process. The last part of this thesis is dedicated to practical analysis of real process behavior data using implemented solution. The results show common usability of statistical methods and approaches to process analysis.
|
|
Quality assessment of pneumatic linear drives
Pecl, Tomáš ; Jankových, Róbert (referee) ; Budík, Tomáš (advisor)
This Master’s thesis deals with the evaluation of quality pneumatic linear drives. The theoretical part describes the problems in the field of pneumatic cylinders and statistical methods to perform the analysis. The practical part includes the execution and evaluation of the statistical analysis of the measurement process and pneumatic cylinders, also brings recommendations to optimize the measurement process. The methods used included analysis Gage R & R, Analysis control charts and data analysis using the process capability. The study was made for the purpose of improving test equipment Norgren Ltd. Used computer programs was Minitab Statistical Software and MS Excel.
|
|
Statistical properties of control charts and capability models
Vidová, Katarína ; Jankových, Róbert (referee) ; Bednář, Josef (advisor)
The diploma thesis is focused on process stability and capability assessment. It describes certain types of control charts, basic capability indices as well as Box-Cox transformation. The practical part of the study is concerned with applying control charts on generated data and consequently on real data. By this, it focuses on comparing various methods of estimating sample standard deviation and on the impact of non-compliance with the assumption of normal distribution of process variable on process stability and capability assessment.
|
|
Product quality assurance in series production
Beneš, Ondřej ; Potanko, Andrej (referee) ; Maradová, Karla (advisor)
This master’s thesis deals with the product quality assurance in series production. Focus of the thesis is on the process of product quality planning and approval process for a part under development. The thesis addresses the issue of initial process capability study, which is one of the production part approval process requirements. Main purpose of the thesis is a statistical analysis and subsequent evaluation of encapsulated coil production process, conducted using the DMAIC methodology. Findings of the analysis confirm significant influence of the input material on the observed parameter. Based on those findings, a change to the purchased part dimensions was proposed, with assumption of moving the process location to the centre of the specification limits and thus increasing the process capability and meeting the customer requirements to the part approval.
|
|
Statistical support of the company management process
Kubíček, Jan ; Jankových, Róbert (referee) ; Maradová, Karla (advisor)
Master’s thesis describes statistical process control as a support for company management. Statistical process control methods and tools are introduced. Requirements for automotive industry are stated specifically for IATF 16949 standard and VDA 6.3 process audit method. Thesis presents current state in company Sanmina-SCI Czech Republic s.r.o regarding statistical regulation. Applies statistical process controls into the new process considering automotive requirements. It is all happening together with a new business introduction of automotive customer.
|
|
Statistical properties of control charts and capability models
Vidová, Katarína ; Jankových, Róbert (referee) ; Bednář, Josef (advisor)
The diploma thesis is focused on process stability and capability assessment. It describes certain types of control charts, basic capability indices as well as Box-Cox transformation. The practical part of the study is concerned with applying control charts on generated data and consequently on real data. By this, it focuses on comparing various methods of estimating sample standard deviation and on the impact of non-compliance with the assumption of normal distribution of process variable on process stability and capability assessment.
|
|
Determination of capability and stability of a chosen technical process
Šváchová, Mariana ; Blecha, Petr (referee) ; Bednář, Josef (advisor)
This diploma thesis deals with the evaluation of the capability of a specific production process. The theoretical part of the work contains a description of statistical process control, types of control charts and evaluation of process capability. The practical part is focused on evaluating the capability of a specific process. The method of dataset collection is described at first, then this data are analyzed and the capability of this process is evaluated.
|
|
Study of implementation of SPC statistical method for control of technological operations
Ondruška, Jan ; Zeman, Karel (referee) ; Jurová, Marie (advisor)
The master’s thesis contains a procedure of implementation of statistical process control for a machining process in a chosen company. The method is based upon knowledge of this topic which are mentioned in the first part of the thesis. The output is a comparison of general process performance before and after implementation of the above-mentioned statistical method and evaluation of the influence of this new method at the process. The comparison is done using hypothesis testing of specific statistical variables and analysis of process performance and capability of both data sets. The acquired knowledge and experience will be used for implementation of statistical process control for other processes in the company’s production portfolio.
|