|
|
Design of underground garage in Brno
Hájek, Jan ; Hladík, Pavel (referee) ; Zich, Miloš (advisor)
The goal of the project is behaviour and dimensioning of selected monolithic concrete structure elements. Design and assessment of the building foundation was made. Slabs of the floors are dimensioned in detail. All computations are made in accordance with Eurocode 2. Drawing documentation is part of this project.
|
|
|
Manufacturing of a VESA holder
Večeřa, Jaromír ; Podaný, Kamil (referee) ; Peterková, Eva (advisor)
This diploma thesis presents a proposal for manufacturing of a monitor holder supporting the VESA mounting system. The part is made of DC01 steel with a thickness of 2 mm, while the size of the production series was set at 150,000 pcs/year. After considering possible production variants, the use of a progressive combined tool combining cutting and bending was chosen as a suitable method. After technology control and selecting a suitable production process, calculations of forming forces and work were performed. The total force was set at 699,7 kN and the total forming work reaches 1,2 kJ. The S160 press from the company Šmeral Brno a.s. was chosen as a suitable machine for production. The semi-finished product in the form of a metal sheet coils will be fed into press by feeding device.
|
|
|
Gloves with motion sensors
Findejsová, Anna ; Cicková, Pavlína (referee) ; Janoušek, Oto (advisor)
Bachelors thesis deals with design and realization of a glove with flex sensors. This thesis summarizes problematics of resistive sensors, describes their principles and using. Then deals with brief upper limb anatomy and degrees of freedom. Theoretical base is stated in chapter one and then used in chapters two, three and four, that describe the design and realization of hardware and software. The principle is based on capturing the flection of the fingers by using flex sensors connected to the Arduino development board and their visualization. The output of this thesis is a laboratory task for teaching senzorics, which is designed for using one flex sensor.
|
|
|
Concrete flat slab of parking house roof
Pivodová, Alena ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
The bachelor's thesis deals with the analysis of the internal forces of the point-supported cast-in-place reinforced slab. The slab is located between three apartment buildings and serves as roofing garage, the roof is proposed as green walkable flat roof. The replacement frame method and Finite Element Method was used for the analysis. Computational software Dlubal RFEM 5.07 was used to calculate internal forces. The slab is designed by two structural types. The thesis deals with design and check one of the types and one column.
|
|
|
Static solution of garage floor slab
Sitta, Martin ; Požár, Michal (referee) ; Zich, Miloš (advisor)
This thesis presents the design and evaluation of a monolithic reinforced concrete slab, which is point-supported by columns with column heads. There were made two designs of this slab, one without column heads and the second was made with column heads. The simplified static calculation by hand and its results were compared with results from computer FEM software.
|
|
|
Design of the bridge over the river
Býčková, Klára ; Rušar, Jaromír (referee) ; Klusáček, Ladislav (advisor)
The aim is to propose solutions to the new bridge construction due to its unsatisfactory compared to the existing bridge reconstruction project . There are three studies bridging and selected variant trapezoidal plate further processed static opinion. The design was judged by the ultimate limit states and usability. Partial assessments were made for the anchoring system, anchorage area , unravels notched bars and store design to support .
|
|
| |
|
|
Production of rack moulding
Repatý, Michal ; Podaný, Kamil (referee) ; Žák, Ladislav (advisor)
The paper evaluates technological, economic and construction aspects of the component production and the design of the tool serving for large-scale production of the S355MC steel rack component. Use of a progressive tool combining cutting and bending operations in four steps has been decided as the most appropriate according to literature study. Based on the need of production of two plane-symmetrical pieces at a time, the tool will produce both pieces simultaneously, which is economically advantageous. The tool is designed for use on the Arisa 630t mechanical press. Material will be winded off the roll, flattened and pushed into the tool by a precision feeder. The total cost of production of the component was set at 18.80 CZK.
|
|
| |
|
|
Tribune of football stadium
Weber, Jozef ; Kostiha, Vojtěch (referee) ; Švaříčková, Ivana (advisor)
The aim of the diploma thesis was to design the precast reinforced concrete prefabricated structures of the football tribune. It was modernized sports center in Brno. According to the investor was determined the shape of the football tribune. It was compiled the design documentation. For the calculation of inner strengths was used the software Dlubal RFEM, which operates on the Finite Element Method - FEM. All elements have been designed for ultimate and serviceability limit state. My thesis contains textual part, inner strengths, static calculations, drawing documentation of composition of structure, drawing documentation of reinforcement and design documentation of the object.
|
guest ::
