|
Proposal of the reconstruction of the distribution network in a specific area
Novák, Vojtěch ; Mrvová, Dana (referee) ; Blažek, Vladimír (advisor)
This diploma thesis is concerned with reconstruction of distribution network in Hruba Vrbka. The diploma thesis is divided in two parts. For better understanding to this issue, the first theoretical part is shortly dedicated to the history of electrical power system, to the several types of distribution network of low voltage and high voltage and their utilization in the area, considering the reliability and the quality of delivery of the electric energy. In this thesis there is mentioned division of distribution grids according to placing of cable lines, according to voltage and according to type of grid connection. Next part of this work is dedicated to the description of overhead lines and cable lines and their characteristics. For the proper concept of the grid we should know some characteristics of the electric line’s proposal: mechanical strength, warming, voltage drop, efficiency, degree of safety and provision of delivery. In the end of the theoretical part there are described methods for calculation of grid’s steady state as a linear task and also non-linear task, elimination of the balancing node, the iterative method, the reduction of external power take-off nodes and the solution of the steady state of the network through the direct current model. The second part of the diploma thesis is concerned with the calculation of the steady state in the village Hruba Vrbka. In this part is also described the KASI program which was used for the calculation of the grid’s steady state. Firstly low voltage grid’s balance in Hruba Vrbka was found out and evaluated and then there were proposed some solutions of the reconstruction for the grid improving. The suggested options of the reconstruction are considered from technical and economical point of view and the best solution is chosen. For this solution there is suggested the protection through program SICHR 9. In the end of this diploma thesis there is checked the load of the high voltage line.
|
|
Utilization of local systems for power system regulation
Kostov, Jiří ; Geschwinder, Lukáš (referee) ; Bartošík, Tomáš (advisor)
Bachelor’s Thesis deals general information about methods of regulation of elektrification systems, including basic principles of regulation of frequency, regulation of voltage and regulation of reactive and active power. Work includes information about aggregate remote control system, power plants that participate on regulation and self device for regulation and controlling of reactive power. Work engages on new options in section of regulation and his requirements for distribution sites. Part of work deals information about renewable natural energy sources and his requirements for distribution sites.
|
|
Distribution Network Development and Configuration
Pospíšil, Petr ; Beneš, Jan (referee) ; Topolánek, David (advisor)
The theme of this master‘s thesis is distribution network development and configuration in the part of Brno – Trnitá. There is expected to be investments there in the next few years. The thesis consists of two parts. For better understanding of this problem, the first theoretical part concerns with the description of electrical network (subdivision in accordance with voltage levels, conductor types, network types and other electrical network parts), solution of grid’s steady state (as a linear task and also non-linear task, elimination of the balancing node, the iterative method) and Brno distribution network characteristics. The second part concerns with distribution network development and configuration depending on anticipated load development in Trnitá. The result is proposal for transformer station construction Opuštěná fitted with three transformers of nominal output SN = 40 MVA and network configuration change required both for providing new consumption supply as well as sustaining current one.
|
|
Design of low-voltage operational amplifier
Sysel, Jan ; Šteffan, Pavel (referee) ; Khateb, Fabian (advisor)
This work deals with the design of operational amplifier with extremely low supply voltage and low power consumption. In the theoretical part is presented theory dealing with the structure and design of operational amplifier. In the following part are desribed design methods suitable for realization of low-voltage circuits. In the next part were designed two operational amplifiers using low-voltage design methods. Properties of these operational amplifiers were then tested by simulations.
|
|
Short Circuit Currents in DC Systems
Kolařík, Robin ; Geschwinder, Lukáš (referee) ; Paar, Martin (advisor)
The bachelor thesis deals with the analysis of short-circuit currents in DC systems. The thesis introduces the possibility of application of low voltage DC distribution in commercial and industrial buildings. The second part is focused to high voltage direct current transmission. The practical part deals with the calculation of short-circuit currents of individual elements and subsequently with short-circuit conditions in the DC network. At the end of the work are evaluated advantages and disadvantages between AC and DC voltage and suitability of use in given areas.
|
|
Low Voltage Low Power Analogue Circuits Design
Alsibai, Ziad ; Horský, Pavel (referee) ; Ďuračková, Daniela (referee) ; Khateb, Fabian (advisor)
Disertační práce je zaměřena na výzkum nejběžnějších metod, které se využívají při návrhu analogových obvodů s využití nízkonapěťových (LV) a nízkopříkonových (LP) struktur. Tyto LV LP obvody mohou být vytvořeny díky vyspělým technologiím nebo také využitím pokročilých technik návrhu. Disertační práce se zabývá právě pokročilými technikami návrhu, především pak nekonvenčními. Mezi tyto techniky patří využití prvků s řízeným substrátem (bulk-driven - BD), s plovoucím hradlem (floating-gate - FG), s kvazi plovoucím hradlem (quasi-floating-gate - QFG), s řízeným substrátem s plovoucím hradlem (bulk-driven floating-gate - BD-FG) a s řízeným substrátem s kvazi plovoucím hradlem (quasi-floating-gate - BD-QFG). Práce je také orientována na možné způsoby implementace známých a moderních aktivních prvků pracujících v napěťovém, proudovém nebo mix-módu. Mezi tyto prvky lze začlenit zesilovače typu OTA (operational transconductance amplifier), CCII (second generation current conveyor), FB-CCII (fully-differential second generation current conveyor), FB-DDA (fully-balanced differential difference amplifier), VDTA (voltage differencing transconductance amplifier), CC-CDBA (current-controlled current differencing buffered amplifier) a CFOA (current feedback operational amplifier). Za účelem potvrzení funkčnosti a chování výše zmíněných struktur a prvků byly vytvořeny příklady aplikací, které simulují usměrňovací a induktanční vlastnosti diody, dále pak filtry dolní propusti, pásmové propusti a také univerzální filtry. Všechny aktivní prvky a příklady aplikací byly ověřeny pomocí PSpice simulací s využitím parametrů technologie 0,18 m TSMC CMOS. Pro ilustraci přesného a účinného chování struktur je v disertační práci zahrnuto velké množství simulačních výsledků.
|
|
The Effect of Accumulation on Distribution Grid Operation
Jestřáb, Tomáš ; Černý, Pavel (referee) ; Toman, Petr (advisor)
This diploma thesis introduces the reader to the possible types of electric energy storage technologies, their comparisons and utilization. After its introduction, it follows the description of individual technologies and principles that are currently meaningful and useful in practice. The thesis continues with the part characterizing the ways of using the accumulation in the grid. However, the main points of this thesis include the analysis of the influence of the photovoltaic installation on the specified distribution grid operation at the low voltage level and the analysis of the influence on the grid with connected accumulation. Another important objective was the model for the calculation of steady-state, which was programmed on the basis of the theory supported by the principles of production from intermittent sources and the principle of accumulation function. The outputs of the model in the form of the calculated voltage ratios at the individual supply points and current flows at the distribution transformer point were used to evaluate the analyzes mentioned above. The courses of the calculated parameters are broken down by different scenarios (according to the period, the degree of integration of production and the accumulation or the power output of the production), graphically processed and compared from the point of view of voltage fluctuations and changes in the power (or current) balance of the supply transformer.
|
|
Electrical system designs of the hotel complex with wellness
Veselý, Vít ; Bátora, Branislav (referee) ; Ptáček, Michal (advisor)
The bachelor thesis deals with the implementation of the technical solution - the distribution of the electrical network of the hotel with wellness. The theoretical part of the thesis presents an analysis of the basic elements used for the design of substations and busbars and introduces the basic computational apparatus for sizing transformers and lines. The practical part presents the various technical solutions for the design of the electrical network of the site, specifically addressing the design of low voltage (LV) cable lines for two variants providing 100 % backup of the electrical supply to the site and two other variants providing 50 % backup. In addition to the technical design of the individual options, the work also presents for each option their detailed financial budgets, including their overall economic comparison.
|
|
Design of low-voltage operational amplifier
Sysel, Jan ; Šteffan, Pavel (referee) ; Khateb, Fabian (advisor)
This work deals with the design of operational amplifier with extremely low supply voltage and low power consumption. In the theoretical part is presented theory dealing with the structure and design of operational amplifier. In the following part are desribed design methods suitable for realization of low-voltage circuits. In the next part were designed two operational amplifiers using low-voltage design methods. Properties of these operational amplifiers were then tested by simulations.
|
|
Creating a substrate for a low voltage cable project
Mahdalová, Tereza ; Mrázek, Daniel (referee) ; Vondrák, Jiří (advisor)
The bachelor thesis deals with the creation of documentation for design purposes when changing or supplementing the low-voltage line in the cadastral area of Pašovice in Moravia. The work consists of updating the technical map of the Zlín Region and then completing and creating additional documents for the planner. In the first part I focus on theoretical basics of technical map and on the technologies used for measurement. There is also a brief introduction to the location. In the second part I deal with the very update of the JDTM-ZK, as well as the creation of the special map in the scale 1: 500
|