|
|
Technological phase of the cover ground object
Fatura, Josef ; Čech, David (referee) ; Henková, Svatava (advisor)
Thesis resolves civil technological stage of the roofing of the administrative buildings and warehouse halls in the Grand River. It deals with the structure, roof insulation, nekrokevní, klempířskými and povlakovou-covering elements. The work contains technology rules, a statement of the Bill, the timetable, drawings and other technological documentation stage.
|
|
|
Family house Rb -3
Růžička, Jiří ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
The project is design a house with a small establishment. The project includes the layout and the design of the house. The house has three floors with an attic and one basement floor. It is designed as a stand-alone. The first floor of the establishment of the background and the main entrance to the house. The rest of the house is designed for family living. This part is a utility room, basement and garage in the basement. Living room with household equipment is then in the upper part of the house. The house is run by two separate entrances with wheelchair access to the premises and the entrance to the garage in the basement. The house is designed as a brick building of brick masonry Porotherm in modular size 250 (125) mm with ceramic ceilings MIAKO a cylinder. Roofed by a gabled roof. The house is located on a private plot of 1200 m2 with built up area of 120 m2. The land is gently sloping.
|
|
|
Mountain hotel in Velké Losiny
Kašíková, Anna ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The work deals with the design of a load-bearing wooden structure of a mountain hotel in the foothills of the Jeseníky Mountains. It is a building without cellar, two floors and a attic room. The floor plan of the building is 17 x 30 m with a porch of 3 x 10 m. Height of the building up to the ridge is 13.2 m. The design of the roof structure has been chosen from 2 different variants. Material usage consist of grown wood of class C24, glued laminated wood of class GL32h and steel S355. Static analysis was calculated by Dlubal RFEM software.
|
|
|
Sport hall in Jihlava
Milich, Marek ; Štrba, Michal (referee) ; Šmak, Milan (advisor)
The aim of this master´s thesis is design and statically examine a bearing structure of ice hockey stadium in Jihlava with axial ground area measuring 43x85 m. Design od structure was prepared in three variants. The core bearing structure composed of three-joint arched roof beam create timber and steel lower beam, or solid wood of glulam timber. The third variant was work out in detail. Scia Engineer 2013 software has been used to create a three-dimensional model for the purpose of dimensioning each member and global analysis. Results obtained from the computer analysis were taken and double-chcecked with a hand assessment of the structure elements.
|
|
|
Semi-detached house, Lanskroun
Němec, Ondřej ; Kalábová, Tereza (referee) ; Bečkovský, David (advisor)
The bachelor thesis is based on design of semi-atteched house on the street Slovenské in Lanškroun. Bulding plot is situated in new city quarter determined for family houses outside the city center. Shape of semi-atteched house is almost rectangle and it is made of two parts where each part is designed for family of four to five members. All living rooms are oriented to south that allows residents to enter the garden and the patio in first floor. Each part of house includes garage for one car.
|
|
|
Timber load bearing structure of a family house
Perhalová, Anna ; Buchta, Stanislav (referee) ; Straka, Bohumil (advisor)
The subject of this bachelor's thesis is design and static assessment of timber load bearing structure of the family house. The object is located in Slavkov u Brna. Design of truss structure is based on architectural study by prof. Ing. arch. Ivan Ruller. The ground plan dimensions of load bearing structure are 11,63x15,00 meters and the height of the roof ridge is 6,56 meters. The structure of the roof is made as a rafter system, which is supported on the lattice truss, on the main beam and wall rafters. Horizontal forces are transferred into the wall panels by means of tight members, which are anchored to wall rafters.
|
|
|
Static analysis of the roof
Hořínek, Josef ; Vlk, Zbyněk (referee) ; Martinásek, Josef (advisor)
The Bachelor Thesis focuses on a static analysis of a timber roof truss. This roof trust is part of the saddle roof on the family home. The load on the structure is calculated manually according to valid standards. The load is divided into a total of 11 load cases. The calculation model of the structure is created in RFEM. Results of internal forces and deformations are checked by manual calculation using methods for statically indeterminate structures. These values are compared at the end.
|
|
|
Mountain hotel in Beskydy
Kubášková, Barbora ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
This thesis solves design of timber structure of mountain hotel in Beskydy. The hotel is two-storey building with residential attic and no cellar. The ground plan of the building is about 15x26 m and height of the building is 14,76 m. The type of roof timbers was chosen from two options. There was used structural timber of the strength class C24, glued laminated timber of the strength class GL24 and steel S235. Program Scia Engineer was used for the static analysis of the structure. There was made only linear calculation.
|
|
|
The reconstruction design of timber structures of the existing building
Bartlová, Jana ; Šmak, Milan (referee) ; Straka, Bohumil (advisor)
The content of this work was to carry out construction-technical survey of timber structures of the existing building in order to design an appropriate procedure for their reconstruction. The survey showed construction in an unsatisfactory to disrepair, so further work also includes the static calculation of new structures proposed instead of the current. Timber structure in the building has form of staircase, roof and ceiling construction. Newly designed the following types of stairs and roof trusses from which the lower belts are used as ceiling beams. The new proposal also includes possible roofing, roofing options, developed one of them. The work also includes drawings, bill of materials and cost estimate staircase structure and truss. Specialization in the field of civil engineering is represented by drawings of the new truss and passport (view of current state) whole object on parcel ST.74 / 1, land Tišnov (okr.Brno-venkov), the content of which was the basis for this work.
|
|
|
Footbridge
Blaška, Jan ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
The subject of the final thesis is timber footbridge for pedestrians and cyclists over the Desna river in Loucna nad Desnou village. The length of the footbridge is 30 m, width 3 m and height is variable from 4 to 5 m. The footbridge is covered with roof inclination of 20° in transverse direction and the roof is arch in longitudinal direction. Roofing is metal sheet. The structure is three-dimensional truss consists of two truss connected by rafters, floor beams and by members of bracing. The 2D-truss consists of bottom chord, top arch chord and webs. There are end posts made of streel bracing frames. The material of structure is mostly glued laminated timber, then timber and steel. The steel is used for connectors and steel bracing frames.
|
guest ::
