|
|
Stress - strain analysis of jaw with tooth implant type BOI
Marcián, Petr ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
Submitted master thesis deals with stress - strain analysis of jaw, with dental implant. The implant serve as a suitable pillar for crown or dental bridge, when one or more teeth are lost. The project is oriented on BOI (basale - oseo - integrable) dental implant type, which is produced by DENTALIHDE company. Stress – strain condition of the mandible system with implant have been established by computational simulation, with use of the final elements method. Important part of down jowl is simulated on with EDS and EDDS applied types of implants. After implementation the implant begins to heal. Therefore the special attention is paid to stress - strain states on various level of osteointegration. There is a detail description of production of single part computational model and his solving in the master thesis. Presentation of large chapter with results and subsequent alteration stress - strain analysis is part of the master thesis. Program SolidWorks 2005 was used to create the geometric model. Computational model and the actual solving was accomplished with use of ANSYS 11.0 and ANSYS Wor-kbench systems.
|
|
|
Optimalizace intenzivního chovu larev candáta obecného (Sander lucioperca L.)
MORAVA, Jakub
The aim of this master thesis was test, comapre and observe the best density of rotifers (Brachionus plicatilis) for growth and survival of zander (Sander lucioperca) larvae stage in the recirculation aquatic systém (RAS). The secondary experiment tests initial feeding of zander by dint of rotifers and consequently by mix of rotifers and artemia. Main experiment observe effect of different density of rotifers on survive and growth of zander. Other observe parameters such as Fulton´s coeficient, total lenght of fish, weight of fish, etc. Fish was divided into 4 groups with different density of feeding and the control group without feeding. Rotifers has been used in density of 2, 6, 10 and 20 pieces per larva. The best growth in "D" group has been compensate by lower surviving. On the other hand the best ratio of survive has been observe in "C" group, which showed lower growth. The optimal rate of growth and survive has been declared in "B" group, which were feed with dose of 6 pieces rotifers for larva. In the second experiment were observe body changes of zander after initial feeding by rotifers folowed with feeding mix of rotifers and artemia. There were observe successful fulfillment of gas bladder and deformation of fish body and spinal after 40 days of keeping larvae in RAS. In the end of experiment there were also observe defirmations body - for example missing lower jaw, upper jaw or both of them. Spinal deformities occured in the form of scoliosis, lordosis, kyphosis and zig zag distortion. The experiment has shown that unsuccessfully filled gas bladder is closely related to the formation of deformitiy in the zander. Another negative factor that affects the filling of the gas bladder is grease on the surface of the water level, so I recommend installing the grease trap in the fill phase of the gas bladder.
|
|
|
Tooth Clasification on Jaw 3D Polygonal Model
Hulík, Rostislav ; Španěl, Michal (referee) ; Kršek, Přemysl (advisor)
This document discusses a solution for tooth classification on 3D jaw polygonal model. Sequentially, I describe techniques for representation and browsing of polygonal model saved in computer memory, techniques for dental curve detection and finally, creation of surface representing approximated tooth plane. After it, I analyze possibilities of height map creation from jaw model which helps in tooth classification in the scope of entire dental curve context and, as a last step, final detection of these teeth in two dimensions. In the same time, I discuss 3D polygonal model segmentation for border extraction, which separates teeth from the rest of the model. In the end of proposed algorithm, I join these two runs into one final detection and classification process of separate teeth, so presented application can automatically indentify and classify teeth to corresponding names and positions with a minimum user interaction. In a second half of this document, I describe implemented solution. According to primary goal, I propose these techniques forcefully to multiplatform approach and maximal user comfort.
|
|
| |
|
|
Tooth Detection on Jaw 3D Computer Polygonal Model
Hulík, Rostislav ; Španěl, Michal (referee) ; Kršek, Přemysl (advisor)
This document discusses a concept and implementation of algorithms for teeth detection on 3D polygonal jaw model. At first, I describe possible shape detection techniques on three dimensional computer model, including utilization just in my case. After it, I analyze filtration problems of obtained model segments in order to reliably separate regions of tooth-arch from the rest of jaw. I included all these pieces of knowledge into a final application. Here, it is possible to choose from two user interfaces, first, classic user interface which demonstrates possible utilization in real world and second, testing interface which demonstrates functions of each detection and filtration method used in program and their effect on detection. Application is written in C++ language in development environment of MS Visual Studio 2005 and compiled with MS VS internal compiler. Tested was under MS Windows XP and MS Windows Vista OS.
|
|
| |
|
|
Stress - strain analysis of jaw with tooth implant
Hamerníková, Martina ; Marcián, Petr (referee) ; Florian, Zdeněk (advisor)
This diploma thesis is oriented on a stress – strain analysis of the jaw bone with a screw dental implant. There is a literature search on this theme in the beginning of this work. Solutions deformation and stress the system lower jaw and implant was performed computational modeling, by using the finite element method. Modeling is part of the lower jaw with dental implants applied screw type Ankylos, Bränemark and implant with metric thread. The thesis is described in detail development of calculation model system and solutions. To create a geometry model of geometry Solidworks 2007 was used. To create calculation model and the solution was implamented in the computer systém ANSYS 11.0 and ANSYS Workbench.
|
|
|
Stress - strain analysis of jaw with decrease bone tissue
Krpalek, David ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis deals with stress - strain analysis of jaw with decrease of bone tis-sue. At first was created a model of geometry using graphic program Rhinoceros 4.0 upon acquisition by the 3D scanner. That was converted to the computational system ANSYS Workbench 11 which uses for solving the finite element method (FEM). Solving was executed with homogenous, linear and isotropic material model of bone with different characteristics for compact and cancellous bone. Forces of the three working muscles, which participate on chewing, were given on the basis of the force and moment balance mandible. Solving was executed for 12 variant simulating occlusion in places, where was earlier found teeth.
|
guest ::
