|
|
Nano-ammeter with galvanic isolation
Šimka, Marek ; Kubíček, Michal (referee) ; Kolka, Zdeněk (advisor)
This bachelor thesis deals with all the aspects, that are important in the designing of the nano-ammeter. In theoretical part, there are described possible ways to measure electrical current of very low values. Other parts of the thesis describe all parameters, which are influencing measurement accuracy. These are, for example, unwanted and leakage currents, but also other parasitic phenomena that may occur. Thesis explains how to minimize unwanted currents and other influences. Practical section provides more detailed description of the proposed main scheme. There are also described components, that have been selected as the main parts of the nano-ammeter circuit. Subsequent part contains analysis of printed circuit board including all layers. Furthermore, the thesis deals with the realization of equipment and possible errors. The results of the bachelor are summarized in the last chapter.
|
|
|
Rodinný dům systému rámové dřevostavby
Polreich, Jakub
This thesis addresses an existing family house at which we can assume insufficient requirements for thermal protection of the building. I have made a wooden construction frame design for the existing built-up area. Part of this thesis are also my calculations of the heat transfer coefficient through perimeter wall. Using a general formula I have detected the thickness of the external walls of the brick building by the heat transfer coefficient through a wall of the wooden house. Enclosed are complete ground plan drawings of the existing building and the construction frame for the wooden house.
|
|
|
Development of advanced masonry components for low energy and passive buildings
Kalina, Jan ; Stančík,, Hynek (referee) ; Zach, Jiří (advisor)
Diploma thesis deals with issue of another possible application of PUR foam in the building, especially during the construction of the masonry structures with the integrated thermal isolator in the low-energy and the passive buildings. The practical part shows the production of the test sample of selected PUR foams and the trials that were performed on the samples. The aim of the thesis was choosing of the PUR foam with the best attributes which would be suitable as an integrated thermal isolator into masonry structures. In the conclusion there was chosen the best foam from which the masonry fragments were made. The static tests were performed on these fragments.
|
|
|
Development of environmental friendly materials
Peterková, Jitka ; ,, Milan Machatka, (referee) ; Plachý, Jan (referee) ; Šťastník, Stanislav (referee) ; Zach, Jiří (advisor)
Increasing demand for new progressive construction materials requires development of modern environmentally friendly materials with excellent end-use properties and reasonable price. One of the main objectives of material research in building industry is using renewable resources of raw materials of industrial waste for development of new construction materials. Current trend of thermal insulation of building constructions results in development of environmentally friendly insulation materials based on renewable material resources from agriculture and stock farming, which could became alternative for current common use insulation materials in the future. The thesis describes research and development of insulation materials based on natural fibres of agricultural origin; in particular fibres of hemp, flax and jute. Hydrothermal behavior of developed materials is studied including computational simulation of behavior of researched materials after building in the construction.
|
|
|
Monitoring the Influence of ceramic bond on the properties of insulating refractory materials
Friček, Jakub ; Kovář,, Pavel (referee) ; Nevřivová, Lenka (advisor)
Thermal insulating refractories are an integral part of each thermal unit since they reduce its energy consumption. The current phenomenon of saving in both environmental and financial aspects reflects in searching for such possibilities to produce at lower manufacturing and material costs. One of the possible ways is to valorise waste materials. The theoretical part then deals with the division of refractory materials, classification of thermal insulation refractory materials and manufacturing technologies. The experiment is focused on the production of insulating refractory materials made from plastic dough with a possibility of using sawdust and materials made by pressing mixture moist, with a focus on coal bottom ash. Both of these technologies will be tested for the possibility of modification by using mixed clays and of increasing the strength by using clays with lower sintering temperature.
|
|
|
Observation of Insulators in ESEM
Matějka, Milan ; Špinka, Jiří (referee) ; Jirák, Josef (advisor)
This graduation theses in introduction deals with principle and problems of electron signal detection in scanning electron microscopy and charging of insulating specimens in SEM. The experimental part of the thesis describe the methods of qualification and quantification of insulating specimen charging effect observed in environmental scanning electron microscope through the use of ionisation and scintillation detector in dependence on water vapour pressure in specimen chamber. The goal of the thesis is formation of the methodics useful to evaluate charging effect at insulating specimens observing and on the basis of measuring, determine optimal conditions for insulating specimen observation with ionisation and scintillation detector.
|
|
| |
|
| |
guest ::
