|
|
Condensing steam turbine
Krška, Jan ; Kracík, Petr (referee) ; Fiedler, Jan (advisor)
This master’s thesis deals with the design of a condensing steam turbine for certain parameters. In the initial part of the thesis, a research on steam turbines and types of blading is carried out. The computational part of the thesis is divided into several subchapters which have been made into larger chapters. One of the chapters deals with the thermodynamic calculation of the flow section of a steam turbine for a clamp power of 5 MW, a speed of 11,000 min-1 and a pressure of 0,1 bar (a). The calculation has been optimized for several basic operating parameters that the steam boiler is capable of achieving with respect to the highest possible thermodynamic efficiency of the plant. The work includes the evaluation of the results in the form of a graph. After the calculations for all steam parameters have been performed, the point was selected which with it’s values meets the requirements for the highest thermodynamic efficiency. The optimum operating parameters of this turbine are such that the turbine at a nominal temperature of 490 °C and an operating pressure of 65 bar (a) achieves a clamp power of 5190,220 kW. The thermodynamic efficiency of the steam turbine is 85,07 % and the reheat factor is 1,0634. Subsequently, basic dimensioning calculations were performed. The calculations are followed by a chapter entitled discussion where some important steps are evaluated. The master’s thesis also contains an appendix. It is a conceptual longitudinal section of a steam turbine.
|
|
|
Restoration of masonry building
Hubený, Radim ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The final thesis is focused on restoration masonry building. Concretely assessment of resistance joist's floors, design alternative's strengthening and impact of surcharge on pronounces constructions. The choice one of alternatives strengthening, design and check of floor structure over the second floor.
|
|
| |
|
|
Analysis of behaviour of reinforced concrete slab
Kubínek, Michal ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
Bachelor thesis describes the analysis of behavior of existing reinforced concrete slab, locally supprorted, ceiling in hospital including 2nd limit state. Calculation od internal forces was made by computer program SCIA Engineer. Several models were made, model with best behavior due to real construction was used for dimensioning. Each model was compared with manual calculation by equivalent frame analysis. After finding inconvenient deflection, especially due to connected construction, new design was made. Thickness of slab was increased and new design of reinforcement was made. New construction was verified for both limit states.
|
|
|
Static analysis of steel structure
Čejková, Eva ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
The diploma thesis is focused on the comparison of the linear and nonlinear analysis of the steel structure and the resulting differences in both the numerical results and the time needed to obtain these results These analyzes are performed on a high-rise building, which has 10 floors and is used as an administrative building. Static model construction and calculations are performed in software system from Dlubal RFEM only loads for individual load cases are calculated manually.
|
|
|
Simulation of solar cells using
Frydrych, Michal ; Vaněk, Jiří (referee) ; Jandová, Kristýna (advisor)
This thesis deals with problems of production of an electric energy by the help of photovoltaic panels. There is mentioned an analysis of problems at calculation of solar system for “island” operation of house, description of all partial segments needed for photovoltaic system and analysis of final costs on purchase of this system. A point of this thesis was making a model of house which used the photovoltaic panels for its function. On this created model was made a measuration during a common day at laboratory conditions and determination the important parameters of solar panel.
|
|
|
Slab bridge near Staré Město village
Tlamka, Tomáš ; Koláček, Jan (referee) ; Panáček, Josef (advisor)
The main aim of this Bachelor thesis is the design of new perpendicular bridge over the Krupá river. The design of the bridge is according to ČSN EN 1992 – 2. The content of the work is primarily of the design supporting structure of the one - span bridge, which is designed in three variants. The selected option consists of additionally prestressed slab of height 800 mm with a length of 21,54 m. Statically is designed as support the storage bridge with a length of 19,00 m. This object converts communications category S 7,5. Load effects were performed using calculation software SCIA ENGINEER 2014. All loads and assessment at the ultimate limit state and limit state are solved according to specific standards.
|
|
|
Static solution of parking house
Rose, Dominik ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The bachelor's thesis is focused on the elaboration of a static solution of a parking house with four above-ground floors. Three variants are elaborated, one of which was elaborated in more detail. The proposed elements are the ceiling slab, the columns and staircase. The SCIA Engineer 20.0 program is used to calculate the internal forces. As part of the work, drawing documentation is also prepared. The structure is designed according to correctly valid standards.
|
|
|
Design of a heating system for an office building
Vítek, Lukáš ; Horká, Lucie (referee) ; Vyhlídalová, Karolína (advisor)
The aim of this bachelor thesis is to design a proposal of space heating and water heating system for an administrative building in Ostrava. The building has four above-ground floors and an underground floor. In the underground floor are located technical building background, stocks and a parking. In the above-ground floors are administrative offices. The heating is solved as a water heating, with a distribution of the heat into the space using panel radiators and convectors. Water heating is solved by an accumulation heater. As a heating energy source serves a cascade gas boilers. We can find in the whole building a forced ventilation. The theoretical part of this thesis deals with the BIM technology.
|
|
|
Assembled structure of hall
Bartosch, Václav ; Chalivopulos, Paris (referee) ; Zich, Miloš (advisor)
Master´s thesis describes the design and static calculating of selected elements of prefabricated reinforced concrete hall with bulit-in office, elaboration of basic drawings of the project documentation, shape and reinforcemenet drawings of these selected structural prefabricated elements. The work also includes technical report, details of selected element´s contacts, drawing of plates and study of the behavior of reinforced buildings. Calculation was performed by using a computer program AxisVm, Microsoft Excel a IDEA StatiCa
|
guest ::
