|
|
Biodegradable metal materials for bone tissue prosthetics
Panáková, Olga ; Vondrák, Jiří (referee) ; Sedlaříková, Marie (advisor)
This paper is focused on use of metal materials as a bone replacement. For coherence of this text is necessary theoretical preamble which is consisting of describing metal properties, aimed particularly at corrosion, valuation methods of disposition to corrosion and mainly corrosion itself. This paper also includes description of techniques of preparation, which involves selection of material and its procession. Furthermore there are stated results of experiments. Those are amended with pictures.
|
|
|
Biodegradable bone implants
Galanová, Zuzana ; Vondrák, Jiří (referee) ; Sedlaříková, Marie (advisor)
This master thesis is focused on producing orthopaedic implant materials and measuring their corrosion properties. It describes the bone and its structure, types, bone ossification and healing. It defines functions of orthopaedic implants and mentions the types of implants – biodegradable and non-biodegradable. The thesis interprets what corrosion is, what categories of corrosion exist and how does the corrosion influence orthopaedic implants. Preparing the solution of stimulated body fluid and manufacturing samples of different metal combinations (of iron, manganese, phosphorus, magnesium, silver and zinc) is included in this thesis, together with corrosion measurements, microscopic observations, EDAX analysis, metallographic analysis, microhardness testing of samples and pH changes measurements of solutions, and the results are interpreted and explained.
|
|
|
Stainless steel for steam sterilizer components
Hradil, David ; Němec, Karel (referee) ; Pacal, Bohumil (advisor)
The thesis titled "Stainless steel for steam sterilizer components" is focused on the selection of the optimum stainless steel for the device, in our case, pure steam generator. In this thesis are introduced the main mechanisms and types of corrosion. There are divided and characterized by various types of stainless steels. The choice of material is carried out with regard to the working environment and the technological possibilities of the individual types of stainless steels.
|
|
|
Surface treatments in mechanical engineering
Čudová, Monika ; Kubíček, Jaroslav (referee) ; Žák, Ladislav (advisor)
The project was developed within the bachelor study presents experimental verification of two given varnishes. They are applied on a specially made plate. It was based on literary studies of corrosion coatings issues - coatings and practical tests. The samples were painted and tested according to the standards. The samples were tested on adhesion of varnishes, bending test and salt stray test. Finally all tests were evaluated.
|
|
|
Manufacture of gastronomic equipment of stainless steel
Macková, Ivana ; Varhaník, Matúš (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis seals with corrosion, stainless steels and surface treatments of steels, which prevent corrosive disruption of the material. Furthermore, the work deals with the design of the production of non-rotating component with a flange made of austenitic stainless steel X5CrNi 18-10. A blank is cut out on sheet shears. A blank is formed into the desire shape on a CYS 320 press by deep drawing technology, and later a flange is cut on LEXN 100 C press. The economic evaluation of production is set at a model situation of 100 000 pcs/year.
|
|
|
Kinds of materials damage - I
Turková, Veronika ; Bryukhova, Lina (referee) ; Neterda, Zdeněk (advisor)
The material of production units it subsequently damified. The aim of this Bachelor’s Thesis is the description of way of some most frequent material defects in the process industry, the way of their judging by laboratory engines and by theoretical relations for the needed magnitude. This thesis shall show the presentation of material damages via diagram, illustrative photo and drawing. The first part of introduced thesis concerns the hyper cycling fatigue and explains basic characteristics of fatigue and cycle loading. The second part introduces the waste by high temperature flowing. The third part explains the waste by corrosion, which is the well known way of material damage.
|
|
|
Evaluation of an inspection program and overhauls for ZLIN 26 aircraft
Jančář, Milan ; Finda, Jindřich (referee) ; Augustin, Petr (advisor)
This bachelor´s thesis deals with ZLIN Z 26 Series Aircraft maintenance and repairs procedures. Even the name shows, that this theme is very demanding and extensive. My interest was to explain some maintenance procedures of these aircraft and offer changes of it. In the beginning of this thesis we can briefly learn history of the ZLIN Aircraft and particular Z 226 Series models. There are mentioned difference maintenance procedures, applicable on the planes thru the service life time. Inspection and overhaul procedures are described in details and for better understanding were attached drawings or photos. Following chapter deals with evaluation existing inspections and overhauls - maintenance – procedures. Optimization of the maintenance is part of the chapter fourth, where is described possible innovation of the maintenance check list. In the last, fifth chapter, of this thesis are mentioned possibilities of the ZLIN Aircraft life time prolongation, which is actually discussed because of some aircraft of this type series reached basic life time limit, without any serious fatigue airframe damages appears.
|
|
|
Optimization Of Methodology For Durability Assessment Of Steel Pylons
Čada, Pavel ; Ing. Miroslav. Brodňan, Ph.D. (referee) ; Chobola, Zdeněk (referee) ; Švehla,, Vladimír (referee) ; Vaněrek, Jan (advisor)
In this thesis the corrosion resistance of two types of steel materials were evaluated, Corten A as a representative of WS (weathering steel) and the corrosion resistance of anti-corrosion protection formed by the zinc coating. The different kinetics of corrosive processes was found during the NSS test. WS steel exposed to 400 hours of NSS laboratory test showed growth of the corrosion rate, however, after this period of time there has been a significant decline in this rate. Conversely, when using Zn as anodic protection, the corrosion losses decrease linear up to 300 hours of exposure, but after this time there was a relatively significant linear increase in corrosion rate. During measurements on existing VHV pylons they were measured corrosion decreases of steel and Zn anti-corrosion protection. Normal corrosion rate for weathering steel with 10 m.a-1 and for Zn corrosion loss 1.8 m.a-1 were found. Technical and economic assessment were evaluated using variant of new poles with Zn surface layer and revitalization of existing pylons from WS steel. With regard to all aspects obtained from laboratory tests and economic assessments, friendlier version of revitalization of existing VHV pylons from WS steel using a sufficient corrosion resistance of these steels were found out.
|
|
|
Production automation of transformer components based on industrial robot
Procházka, Petr ; Kubela, Tomáš (referee) ; Pochylý, Aleš (advisor)
The bachelor´s thesis focuses on the automate process of primary transformer´s soldering. My work is to assess proceedings that guarantee that tolerances given by the controlling company shall be as accurate as possible. Final version of the product is modified in such a way to meet a size criterion as well as strength, anti-corrosion, space and price standards. The final version of the product is tested by the robot during the process. The main task is the verification of the size stability during the operation. One of the point of my bachelor´s thesis is to descripe a plan of automate workplace. The main reason for designing a plan of automate workplace is to help employees and facilitate from demanding work in the process of primary coil soldering.
|
|
|
Corrosion resistance of aluminum alloys
Kouba, Jan ; Pacal,, Bohumil (referee) ; Zmrzlý, Martin (advisor)
This diploma thesis deals with cerium-based conversion coatings for aluminium alloys. At first the mechanism of protection of metals by inhibitory substances is described in the theoretical section. The next chapter is devoted to application of lanthanide salts as cathodic corrosion inhibitors. Then the characterization of alloy AA 2024 follows. The main part is dedicated to the growth mechanism of the cerium-based mixed conversion coating on the alloy AA 2024. Finally, the factors affecting the character and the quality of obtained coatings are commented. In the experimental part an influence of the thermal activation together with the activation by a hydrogen peroxide was observed. The created film was characterized using SEM and EDS. The level of corrosion protection was evaluated by the polarization resistance measurement. erized using SEM and EDS. The level of corrosion protection was evaluated by the polarization resistance measurement.
|
guest ::
