|
|
Office Building
Marek, Václav ; Ostrý, Milan (referee) ; Struhala, Karel (advisor)
The thesis describes design of an L-shaped two-storey office building in Chotěboř, which can work with saving energy and be careful to nature. Using renewable materials and new technical equipments. At the end of the design, there should be a building that will be architecturally interesting, energy-efficient and use renewable resources. It is a two-storey building, which is designed for office working and one part of building can be used for teaching science. Main roof on administration part has saddle shape, second roof on part which science centre has flat roof. Both roofs are intensive green roof overgrown with plants. For day illumination, there are design French windows with openings parts. Most of the first floor and the whole second floor belongs to offices and auxiliary staff rooms, toilets, etc. First floor also includes a small training centre with one classroom and necessary facilities (toilet, staff room, etc.). The load-bearing structures (foundations, walls, columns, floor and roof slabs, etc.) are designed from cast-in-place reinforced concrete. Load bearing vertical elements are walls, columns, and posts. Part of the first floor exceeding the layout of the second floor is covered with a flat green roof. Second floor is covered with a saddle green roof. All drawings and 3D rendering were done using ArchiCAD software.
|
|
|
Solution of construction-technological phase of substructure of the hotel building in Brno
Staněk, Martin ; Nečasová, Barbora (referee) ; Venkrbec, Václav (advisor)
The construction of the carcass substructure of the recreation center in Brno-Kníničky is addressed in this bachelor's thesis. It is a three-storey building in which the foundations are made of waterproof concrete structure. The text part of the thesis contains a technological regulation, quality control inspection and test plan, machinery set, technical report of construction site equipment, technical report for the technological project and occupational health and safety plan. The appendix part deals with the construction site plan, the schemes of construction machines tracking, budget as well as gantt's schedule.
|
|
|
Apartment building
Pavlíček, Jiří ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
The subject of this bachelor thesis is the elaboration of project documentation for the construction of an apartment building. It is a detached basement building, which is located on a rectangular plot with flat terrain. The building is designed with four floors and one underground floor. This new building is equipped with a lift for 8 people. In the underground floor there is a technical background of the building and a storage cellars for individual apartments. There are 12 flats with different disposition and size of floor areas. The load-bearing structural system is diagonal. The lower structure is made of a waterproof concrete, the so-called "white tub" which consists of a reinforced concrete foundation slab and reinforced concrete basement walls. The upper structure is built of Porotherm system, which is insulated with ETICS facade contact system with basalt wool insulation boards. Ceiling structures are designed as monolithic reinforced concrete slabs and the staircase is built as a reinforced concrete monolithic three-armed. The façade is shaped according to the partially opened loggias. The last floor recedes from the face of the building and creates spacious terraces. Holes are filled with wooden windows. The roofing of the apartment building is solved by a single-layer flat roof with a classical layer arrangement and a hydro isolation layer made of asphalt strips.
|
|
|
Multifunctional buiding Dělnická
Horňáková, Veronika ; Velecký, Pavel (referee) ; Utíkalová, Ivana (advisor)
The subject of diploma thesis is processing of the desing documentation for new multifunctional building in the street Dělnická, cadastre unit Komín, Brno - Komin. The building is a 3 floors and one underground floor and is designed as a last building in the street on the nearly flat land. In the building is located non-residential space, dwelling units and studios. Non-residential space comprise seven parking spaces in a public underground garage, two stores barrier-free solution with the facilities and two studios 1 + 1. The residential part has two dwelling units 1 + kk, two dwelling units 2 +1 and two dwelling units 4 + kk. The building is based on a waterproof concrete structure "white tub". The vertical structure is built of clay blocks Porotherm, horizontal structures are cast-in-place reinforced concrete. The exterior building envelope is completed with thermal insulation. An internal staircase is cast-in-place reinforced concrete. The entrance to the garage for cars is possible by Autolift. The building is roofed with warm flat roof. The drawings are processed in AutoCAD software visualization are processed in Sketch Up
|
|
|
Design of the supporting structure of the elementary school
Vintrová, Tereza ; Huryta, Ladislav (referee) ; Zich, Miloš (advisor)
The diploma thesis deals with the design of the load-bearing structure of the main building of the primary school in the village of Hrušovany u Brna, followed by the assessment of selected parts of the structure. The building is designed as a monolithic skeleton based on foundation slabs, which, together with the basement walls, form a "white tank." The subsequent assessment focuses primarily on the foundation structures, walls, roof slab, selected columns, and the staircase. Computational models and the internal forces obtained from them were created using the SCIA Engineer software. The thesis includes a static calculation and drawing documentation. The thesis was conducted in accordance with applicable standards.
|
|
|
Multifunctional Building
Štěrba, Maroš ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The objective of the diploma thesis is to design project for the realisation of new a multifunctional building in city of Brno, Zábrdovice on the corner of Příkop and Bratislavská streets in the wider city center. The object with cellar contains a collective garage. On the ground floor there is a café, from the second to the fourth floor offers rentable office space, on the top floors, the fifth and receding sixth floors are situated apartments varying in size from studio to penthouse. The building is based on a white tub and piles of plain concrete. The supporting system consists of a plate skeleton with concealed heads with reinforcing reinforced concrete monolithic core and two gable reinforcing walls. The skeleton is filled with brickwork. Covered by a combined roof. The main entrance to the building is located on the eastern side along Příkop Street. The architectural expression of the building consists of ceramic cladding strips and rhythm of the hole fill pattern, which decrease with the rising floor.
|
|
|
Reinforced concrete foundation tank of office building
Turek, Jan ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The master’s thesis deals with a design of a reinforced concrete foundation of multi-storey office building. The basement of the building is an underground watertight structure. The design of foundations is a combination of a concrete slab and piles. Internal forces were analysed in RFEM software based on finite element method. The structural assessment of underground construction was performed according to ultimate and serviceability limit states. Due to watertight function of construction, the reinforcement was also designed according to non-force effect in early stage.
|
|
|
Multifunctional Building
Velecký, Tomáš ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
This diploma thesis is focused on design cast-in-place reinforced concrete structure multi-storey multifunctional building according to the source material. Specifically, foundation slab and external wall in B1 taking into account the waterproofness of the construction. Then staircase, column in lowest storey and two floor slab are designed as selected load-bearing structure. Elements are dimensioned according to ČSN EN 1992-1-1: Design of concrete structures - general rules and rules for building structures. In the drawing part of the diploma thesis are drawn drawings of the shapes and reinforcement.
|
|
|
Waterproof concrete structures and regulations for the design and implementation
Křenek, Daniel ; Brožovský, Jiří (referee) ; Hubáček, Adam (advisor)
This thesis covers the issues of design, production, and property testing in regards to waterlight concrete structures. The testing conducted on the properties fit in accordance to the Czech Republic and international regulations. This thesis covers the issues of design, production, and property testing in regards to waterlight concrete structures. The experimental part focused on the design of the concrete mix, which stems from previous knowledge of individual, and speific regulations. Various types of cement were particularly examined along with studying the effects of admixtures that were partially replaced by cement with propoerties of watertight concrete
|
|
|
Polyfunctional house
Kuklová, Jana ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The main aim of the thesis is to design a new building of the mixed-use building in Brno. The building consists of two parts. One part consists of shops. The second part consists of offices and conference space. It is a building that has three floors above ground and one underground. In the basement there are a facilities and a garage. Shops are designed on the ground floor. There are offices on the second floor. Conference rooms are on the third floor. The building has a flat roof. The vertical load-bearing structures are designed from Porotherm ceramic blocks. In the core of the building, the vertical load bearing structures are designed as monolithic reinforced concrete walls. Columns are used in the building for the possibility of open space. The masonry of the basement consists of white bathtub. The floors are designed as folded from the Spiroll system. Internal non-load-bearing walls are designed from gypsum board with double cladding. The second part of the work deals with forced ventilation, cooling and central heating. In the third part of the project I deal with acoustics. The project was carried out in the Auotocad program. All constructions comply with valid standards and regulations.
|
guest ::
