|
|
Financial analysis of Renewable energy
Kožík, Martin ; Hobst, Leonard (referee) ; Hrabová, Kristýna (advisor)
This thesis is focused on renewable energy sources, which are currently and increasingly used. Primarily for passive and low-energy houses. The principles that apply to heat pumps and solar collectors with thermal storage, which are suitable for new or older buildings, are described in detail. The thesis analyzes the thermal properties of the object under consideration and the proposed heat pump with its calculation and determination of the payback period of the investment in dependence on the analysis of energy price development in the las 10 years.
|
|
|
Study of passive stabilisation of building materials temperature
Šebek, Jan ; Pavlík,, Zbyšek (referee) ; Zmeškal, Oldřich (advisor)
The topic of presented master’s thesis was study of passive stabilization of building materials temperature. The main goal of this thesis was measuring and characterization of the thermal properties of building materials, which are used to PCM technology. PCM technology is based on utilization of latent heat of phase change. At the beginning of this thesis it was needed to define physical principle of phase change, then the most usable PCM chemicals (e.g. paraffin, Glauber’s salt, hexahydrate calcium chloride) and their basic physical properties (especially thermo-physical), background research of building materials with PCM and also the methods of thermo-physical properties measurement. It was also needed to characterize measured building materials and define theirs thermal parameters; because the values of thermal parameters of measured samples were compared to these values. In the experimental part of my thesis are measurements of material thermal analysis, which are methods, where the properties of materials are studied as they change with temperature. I had used to differential scanning calorimetry, transient pulse method and other methods, which are usable for thermo-physical properties measuring and characterization. I have been much interested in properties of measured material, which were specific heat capacity, temperature diffusivity, heat conductivity and phase change temperature (the melting point of PCM). At the end of my thesis the findings of all methods were finally summarized, compared and commented.
|
|
|
Study of Thermal Properties of Materials for 3D Printing
Lapčíková, Tereza ; Menčík, Přemysl (referee) ; Zmeškal, Oldřich (advisor)
The aim of this bachelor thesis was to study thermal properties of materials used for 3D printing (so-called filaments), especially a polylactic acid (PLA). Within the theoretical part there was performed the literature review focused on the description of different methods of 3D printing including the summary of suitable materials for these technologies. In particular, we focused on the preparation of PLA, its summarization of its chemical, physical and thermal properties and its practical use in 3D additive printing manufacturing, e.g. in biomedical applications. In the experimental part, PLA samples of different thicknesses were prepared by 3D printing technique and thermal properties such as thermal capacity and thermal conductivity were determined. It was found that thermal conductivity of studied material was 0,128 W/m/K and specific heat capacity 1335 J/kg/K. These values corresponded to the once given in the literature.
|
|
|
Study of Electric and Thermal Properties of Building Materials with Conductive Additives
Veselá, Jana ; Krouská, Jitka (referee) ; Zmeškal, Oldřich (advisor)
This work focuses on study of electric, dielectric and thermal properties of composite electrically conductive building materials composed of magnesium oxychloride cement and small amount of graphene and graphite admixtures. The aim of this work was to determine thermal properties of materials and create a model of electric current conduction mechanism in material. Electric and dielectric properties were determined with using of transient direct current measurement of resistivity and impedance spectroscopy. Thermal properties were investigated using transient step-wise method and fractal analysis of thermocamera data. Electrical resistivities of materials are determined from the direct current measurements. Model of transport of electrical charge carriers was evaluated by fitting impedance data to an equivalent electrical circuit model. Thermal conductivities and thermal capacities were determined by means of thermal measurements. The presented properties for example can be used for assessment of suitability for specific construction applications.
|
|
|
Study of Thermal Properties of Materials for 3D Printing
Lapčíková, Tereza ; Menčík, Přemysl (referee) ; Zmeškal, Oldřich (advisor)
The aim of this bachelor thesis was to study thermal properties of materials used for 3D printing (so-called filaments), especially a polylactic acid (PLA). Within the theoretical part there was performed the literature review focused on the description of different methods of 3D printing including the summary of suitable materials for these technologies. In particular, we focused on the preparation of PLA, its summarization of its chemical, physical and thermal properties and its practical use in 3D additive printing manufacturing, e.g. in biomedical applications. In the experimental part, PLA samples of different thicknesses were prepared by 3D printing technique and thermal properties such as thermal capacity and thermal conductivity were determined. It was found that thermal conductivity of studied material was 0,128 W/m/K and specific heat capacity 1335 J/kg/K. These values corresponded to the once given in the literature.
|
|
| |
|
|
Financial analysis of Renewable energy
Kožík, Martin ; Hobst, Leonard (referee) ; Hrabová, Kristýna (advisor)
This thesis is focused on renewable energy sources, which are currently and increasingly used. Primarily for passive and low-energy houses. The principles that apply to heat pumps and solar collectors with thermal storage, which are suitable for new or older buildings, are described in detail. The thesis analyzes the thermal properties of the object under consideration and the proposed heat pump with its calculation and determination of the payback period of the investment in dependence on the analysis of energy price development in the las 10 years.
|
|
|
Study of Electric and Dielectric Properties of Alkali-Activated Aluminosilicate with Increased Electrical Conductivity
Florián, Pavel ; Pavlík, Zbyšek (referee) ; Matiašovský, Peter (referee) ; Zmeškal, Oldřich (advisor)
This dissertation deals with the study of electric and dielectric properties of composite structures on the base of alkali-activated aluminosilicates with admixtures of various carbon particles. These materials fabricated from alkali-activated blast furnace slag, quarz sand, natrium water glass as alkali activator, water, dispersant and small amount of carbon admixture (carbon black, graphite powder, carbon fibers or carbon nanotubes) to increase electric conductivity may be used for example to construction of snow-melting, deicing and self-monitoring systems. Their current-voltage characteristics and impedance spectra were used for determination of electric and dielectric properties of these structures. The equivalent circuits were used for evaluation of impedance spectra. The results were correlated with thermal properties of these structures.
|
|
|
Thermal properties of high performance fibre reinforced concrete
Pecháčková, Kateřina ; Krouská, Jitka (referee) ; Zmeškal, Oldřich (advisor)
This diploma thesis is focused on the study of the thermal properties of high-performance fiber reinforced concrete HPFRC. The composites are based on a combination of steel and polymeric fibers. Typical properties of these materials include high mechanical strength, water resistence and salt penetration. HPFRCs are mainly used in the construction industry to build tall buildings. The differential transient method was used to study thermophysical variables. The theoretical part of the thesis described the types of concrete, their production, and their properties. Furthermore, thermophysical quantities and methods of their determination (stationary and transient methods, thermal analysis) are defined in the thesis. The aim of the thesis was to determine thermal properties, namely thermal conductivity and specific heat capacity. The results of the thesis can reveal changes in the composition of studied materials as well as critical temperatures for damaging the materials.
|
|
| |
guest ::
