|
|
Benefits of Product Manufacturing Optimalization
Vémola, Martin ; Pišoft, Martin (referee) ; Jurová, Marie (advisor)
This thesis deals with the optimalization of production of the thermostat bulb K22 in Invensys Appliance Šternberk Ltd. company. It analyzes the manufacturing process and proposes its optimal solutions. This thesis also describes other possible solutions that contribute to efficient management of the lean enterprise. The main benefit of this thesis is in the reduction of required labor time for the manufacture of the thermostat and in the introduction of lean management of selected tools.
|
|
|
Evaluation of performance of Federal-Mogul Friction Products a.s. using EFQM Excelence model
Dosedlová, Petra ; Ing.Jaromír Jareš (referee) ; Kocmanová, Alena (advisor)
The master´s thesis deals with performance measurement of the company FEDEDAL-MOGUL Friction Production, a.s. This valuation of efficiency is performed on EFQM Excellence model. Theoretical part of thesis is focused on description of selected models of valuation of efficiency with more detailed orientation to EFQM Excellence model. In the second part the company is characterized and company´s current situation is described.The last part contains an application of START PLUS model based on the principles of The EFQM Excellence Model. At the end are series of recommendations for increase efficiency.
|
|
|
Reduction of scrapping in ZR projects
Urbanová, Simona ; Doňarová, Jana (referee) ; Fiala, Alois (advisor)
The diploma thesis deals with reduction of scrapping at zero rework projects. These are the projects where corrections of particular parts are not allowed. If there are any in this way damaged parts, the entire products become scraps. Due to the fact the cost of low quality is increased, which is undesirable. The theoretical part describes the use of the six sigma method, which is then applied in the practical part. By using the IPO analysis the possible causes of the main problem have been chosen and then tested. The output of the diploma thesis is to find out and eliminate the causes of discrepancy, especially bridge walls at zero rework projects. After implementation of the first arrangements the scrapping has already been reduced.
|
|
| |
|
|
Quality – Condition of Competitiveness
Pokorný, Zdeněk ; Řezníčková, Hana (referee) ; Fiala, Alois (advisor)
This thesis deals with issues related to quality – a condition of competitiveness. The introductory chapters define key words and they are followed by a product characteristic. The next chapters are devoted to the analysis of the particular methods, techniques and tools for improving quality, especially the strategies - Six Sigma and KAIZEN. In conclusion the possible future development in the area is outlined.
|
|
|
Application of Excellence Model in Company
Vatalová, Zuzana ; Novák, Zdeněk (referee) ; Rompotl, Jaroslav (advisor)
This masters thesis is concerned with the quality of the company Continental Barum Ltd., which operates in the tire industry. After evaluating the current situation in the company the EFQM method is applied, which showed the weaknesses and strengths of the company. Based on the findings, there are suggested recommendations for the highest ranking company according to the method of Excellence.
|
|
|
Statistical Process Control and Reduction of Scrap
Negrová, Stefania ; Blecha, Petr (referee) ; Bednář, Josef (advisor)
The aim of the diploma´s thesis is analysis of the scrap of the chosen process, using the tools of statistical process control and proposal of appropriate containment to reduce the scrap. The thesis describes all seven basic tools of quality and the greatest attention is aimed to Shewart's control charts. One chapter discusses three methods of problem solving in technical practice, while one of the described methods is used in the practical part of the thesis.
|
|
|
Design of QMS in small organization
Heger, Jan ; Krásová, Anna (referee) ; Fiala, Alois (advisor)
The thesis suggests quality management for small organizations and focuses on its implementation, using the DMAIC methodology in accordance with ČSN EN ISO 9001. First, a chosen small organization will be analysed; next, the key processes will be defined and their setting in accordance with ČSN EN ISO 9001 provided.
|
|
|
Electrotechnical production mapping and improvement
Kutnar, Pavel ; Starý, Jiří (referee) ; Špinka, Jiří (advisor)
This thesis is an introduction into quality management of electrotechnical production. It consists of a theoretical treatise on FMEA analysis and process mapping. The FMEA analysis was applied to the manufacturing process in an electrotechnical company. Selected critical failures were analyzed and corrective measures were suggested.
|
|
|
Optimization of production process
Olšák, Jiří ; Doňarová, Jana (referee) ; Fiala, Alois (advisor)
The aim of this thesis is to reduce the cost of poor quality in the chosen production process. Specifically I focused on the winding lines at the production of rotors, which are components of electronic brake systems (EBS) and heating and ventilation systems of cars. The thesis was worked out in accordance with an announced Six Sigma project in the company. I also dealt with the Six Sigma strategy in the theoretical part. The chosen tools are applied afterwards in the practical part, especially in define, measure and analyse phases. The output of this thesis is an analysis of all possible causes of high scrap ratio in the stated production process. I also proposed to adopt measures for cutting the cost of poor quality in the chosen production process.
|
guest ::
