|
|
Dynamic simulation of DC motor using FEM
Gottwald, Michal ; Huzlík, Rostislav (referee) ; Vítek, Ondřej (advisor)
My diploma thesis deals with a specific dynamic model of DC motor with the parameters obtained from the calculation and from the program using the finite element method. It shows how much accurate results can be achieved in the model, if you use only the values which can be measured, recorded and calculated on the engine. This thesis contens three parts. First part describes the structure and function of DC motor and the basic principle and the use of FEM. Next is calculation analytical and numerical parameters. The search parameters include torque, resistance and inductance of armature winding, resistance and inductance of excitation windings. The last part is dedicated to creating a dynamic model. Results from the dynamic model and measured values are compared in the conclusion of my thesis.
|
|
|
Investigation of intercalation of alkaline metals in electrochromic devices
Kortyš, Petr ; Špičák, Petr (referee) ; Svoboda, Vít (advisor)
This work deals with investigation of intercalation of alkaline metals in electrochromic devices by the help of the quartz crystal microbalance method. The general aim is to investigate the influence of molar mass and resistance on properties of vanadium pentoxide and tungsten trioxide electrochromic films. The main measuring method used for investigating of interacalation of sodium and lithium ions into these films is the cyclic voltammetry. Drawn graphs reveals that sodium and lithium ions shows different qualities during intercalation, particularly in participation of solvent, therefore, in the influence of molar mass and in structural changes in the films.
|
|
|
Continuous conductivity measurement of produced copper wire
Kozáček, Peter ; Hadinec, Michal (referee) ; Klusáček, Stanislav (advisor)
My project is about possibilities of conductivity measurement of copper wire. I focus on basic principles of conductivity measurement and their applicability for continues measurement. Also I focus on proposing methods which would be the most appropriate for continuing measurement of conductivity. Each individual method is based on basic physic principles. I compare these measurement methods from different important industrial point of views in this project.
|
|
|
Conceptual design of the conversion of an electric motorcycle
Roman, David ; Zeizinger, Lukáš (referee) ; Böhm, Michael (advisor)
The work is about the study of the current offer of electric motorcycles, individual structural elements, and the concept of using an electric motor and battery. Furthermore, the work compares the operating costs of conventional internal combustion engines and electric motors. The main part of the work is the calculation of the battery capacity for the motorcycle, which is converted from a conventional internal combustion engine to an electric motor and the selection of a suitable engine and battery storage concept, so that the dynamics of the motorcycle is not significantly affected.
|
|
|
DC/DC step-up converter for notebook
Škunda, Michal ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
Given bachelor’s thesis devoted to a proposal and implementation of transducer STEP-UP for supplying of notebook in car. Introduction presents dividing of switching power supplies followed by a choice and a proposal of power supply. In this work we can find the specific proposal of inductor, the proposal of electronic connexion and the proposal of PCB layout. There is a software EAGLE used for the design of PCB layout. In the last part of work there are particular courses of current and voltage that characterize power supply pictured. The work contains measured load characteristic of switching power supply loaded by notebook as well. Notebooks need to have quality power supplies that is why there was a special attention paid to the quality of supply and its electric parameters.
|
|
|
Testing of polymeric piezoresistive materials for use in pressure sensors
Janík, Jan ; Chladil, Ladislav (referee) ; Čech, Ondřej (advisor)
The aim of the bachelor’s thesis is to choose convenient piezoresistive and conductive materials for pressure sensors in the field of e-textiles. Thesis is divided into practical and theoretical part. Theoretical part deals with piezoeresistive effect itself and describes composite and piezoresistive materials. Practical part is focused on laboratory measuring resistance and capacitance of pressure materials and sensors in dependence on stress level. This part also includes practical reliability testings of conductive materials using accelerated aging testing methods.
|
|
|
Calculation of heat and force field UniGear ZS1
Mokrý, Lukáš ; ABB, Drahomír Tůma, (referee) ; Dohnal, Petr (advisor)
The aim of my work is to describe high-voltage switchgear type UniGear 500R, which is part of UniGear switchgears family. I will focus on heating issue of one 500R unit and its parts during operation. Maximum values of this heating is limited by standards and can´t be exceed to ensure safe and reliable operation. That is why the heating tests are necessary part of designing and developing switchgears. Calculation will be made by two different ways. First is classic one-pole heating net method and second is numerical simulation in Solidworks flow simulation program. Except the theoretical description there will be presented also used 3D model and explanation of both method, used to calculation and simulation. Last point of this work is measuring of this type of switchgear and getting real data. The main point there is to compare measured values with values calculated and decide if is possible to simulate tests with appropriate accuracy. Then would be also possible to substitute the real test in laboratory, which costs many thousand crowns and takes lots hours of time. This work is collaborated with EJF division of ABB Company, where I am employed. Heating issues in this company is always on process, because of developing and improving of their products. So this work could be helpful in this field. ABB provides all materials needed, especially technical catalogues, 3D model and final values from laboratory measuring. Support from college faculty is mainly in study consultations and proposing of calculations making. In the end of work will be make final comparison and evaluation of achieved results.
|
|
|
Study of influence of secondary raw materials on mechanical resistence of the industrial floors
Figala, Petr ; Bydžovský, Jiří (referee) ; Drochytka, Rostislav (advisor)
Secondary raw materials are nowadays increasingly used as materials in many sectors of the construction industry. This thesis evaluates current state of industrial floor systems and their final adjustments to increase its mechanical and chemical resistance. At the same timethis thesis focuses on the possibilities of using secondary raw materials in the development of new industrial floors. The goal is to partly replace the silicate binder in the raw material mix of cement screed with a secondary raw material to achieve the same or better physical and mechanical characteristics. This part is also verified experimentally, and its conclusion is to design an optimal recipe of screed by using secondary raw materials.
|
|
|
Stabilized operation of a 400 kV power line
Girga, Eduard ; Špaček, Jaroslav (referee) ; Blažek, Vladimír (advisor)
Electrical wiring 400 kV is the most used transfer wiring in the Czech Republic with length over three thousand kilometers. It is frequently used for running out significant output from the big power plants and for its significance in electrical engineering. Theoretical part of this thesis deals with the cross-section of mainly used methods for high and extra high stable wiring voltage solution. These methods can be generally dividend into precise and rough. Both of these methods will be analyzed in next chapters. Exact solution comes out from the presumption of equally spaced parameters. The rough solution uses substitution of double gates wiring, this method is accurate enough and accelerates the calculation. Former mentioned reasons explains it’s often use in technical practice. The electric line is substituted by T-cell, II-cell or Steinmetz cell according to length and required precision. Special method of rough solution is the broad method which enables to solve randomly knotted network by using II-cell to replace electric wiring between single knots. This method is mentioned in thesis for completeness; the network solved by me is not knotted. Part of the theoretical thesis is the analysis of specific transfer cases. In computing part will be mentioned not only the computation of stable wiring state with precise an rough method - with all former mentioned cell but the computation of specific transfer cases as well. In the end will be concluded all the counts from computing part and from precision view evaluated used methods of the stable wiring solution.
|
|
|
Sun Sensor for I2C bus
Hodáňová, Adéla ; Povalač, Aleš (referee) ; Urbanec, Tomáš (advisor)
This thesis contains design of sun sensor. At first, it deals with different types of sensors, after which it focuses on selection of mode for connecting the sensor. After measuring all parameters, this thesis focus is determining of diode configuration in space. Next part of the thesis is choice of suitable microprocessor and its support circuits. Thesis ends with construction of the sun sensor and testing of sensor’s parameters.
|
guest ::
