|
|
Signal Processing in Flarion System
Szajkó, Juraj ; Kejík, Petr (referee) ; Hanus, Stanislav (advisor)
Cílem bakalářské práce Zpracování signálů v systému Flarion bylo prostudovat způsoby zpracování signálu ve fyzické vrstvě a architekturu sítě Flarion. Na základě získaných poznatků při studiu fyzické vrstvy bylo za úkolem sestavit v prostředí Matlab model systému a simulace BER v závislosti na poměr vysílaného výkonu a výkonu rušivého signálu. V první části práce je detailní popis fyzické vrstvy Flarionu, probrána je baseband a OFDM modulace, LDPC kódování a frekvenční skákání. V druhém části práce je prostudována architektura sítě, ekvalizace, řízení výkonu, radiových zdrojů, a způsob handoffu. Ve třetí části práce je vytvoření downlink a uplink modelu v Matlab, dále je provedena simulace BER v závislosti na poměr vysílaného výkonu a výkonu rušivého signálu.
|
|
|
Three-phase sinusoidal pulse width modulation algorithms
Rudolf, Ladislav ; Červinka, Dalibor (referee) ; Klíma, Bohumil (advisor)
The main theme of this bachelors‘s thesis is to introduce readers into the algorithm of generating three-phase sinusoidal pulse width modulation. Main attention is concentrating to methods of generating Pulse width modulation method such as comparate PWM modulation technique and space modulation of voltage vector SVM. The functional units of algorithms are analysed and described from the basics. In addition, this project describes the basic analog solutions and even the implementation of the PWM modulator into signal processors DSP56F800.
|
|
| |
|
|
DOCSIS Technology in Access Networks
Pirohanič, Lukáš ; Šilhavý, Pavel (referee) ; Horváth, Tomáš (advisor)
This bachelor thesis explains the design and implementation of data communication between a central unit and a cable modem. Suitable transfer medium and intermediate devices for signal forking and amplification are chosen in practical part of the work. The upstream and downstream channel transfer rates are tested using modulation techniques and also testing the DOCSIS Network for qualitative parameters and laboratory task dealing with the DOCSIS standard. The theoretical part describes DOCSIS standard, CATV network architecture and signal modulation during transmission.
|
|
|
Laboratory railway model control
Šimík, Vladislav ; Chovanec, Jan (referee) ; Zezulka, František (advisor)
This work deals with possibilities of operating signals under the power supply voltage and using of this technology in guidance of a model of railway. Firstly there is an analysis of analogous and digital guidance of the model of railway. There is also a description of theory of three kinds of used modulations such as ASK, FSK and OFDM modulation. There are described only principles of those modulations because the problematic of the modulation is going to be solved by integrated circuit. The next part of this work is going to deal with a market research and with description integrated circuits, which ensure the modulation of operating signals of power supply voltage. There is also going to be noticed a description of others circuits that are needed for the correct function of the whole furnishing. Then I will continue with a project of scheme and single PCB for a guidance of the model of the railway. The last part of this work is concerned with activation and a proof of those proposed linkage.
|
|
|
Adaptive OFDM
Nowak, Dan ; Valenta, Václav (referee) ; Maršálek, Roman (advisor)
The purpose of this paper is to study the possibilities of the OFDM system adaptive modulation. The study presents mechanism for acquiring the necessary data of every frequency subchannel using pilot signals and application of these data for system adjustment. The paper introduces the water-filling principle for subchannel power allocation on the basis of their SNR and adaptive modulation mechanisms for variety of OFDM usage. These mechanisms are implemented into a MATLAB model. The code is then transformed into graphical representation and using USRP2, the signal is transmitted by real world channel.
|
|
|
Modulation signal source for microwave beacon
Belloň, Michal ; Vondra, Vlastimil (referee) ; Kasal, Miroslav (advisor)
This project is focused on construction of source of modulation signal for microwave beacon. The output signal is the same as signal, which is generated by PC software WSJT (Weak Signal by Joe Taylor) on PC sound card output. Signal on device output is modulated using by WSJT modulation and its specific JT4 mode. The device output has I and Q components of signal.
|
|
|
Implemetation of signal processing problems for teaching purposes
Ševčík, Zdeněk ; Rajmic, Pavel (referee) ; Mangová, Marie (advisor)
This thesis is focused on Fourier series, phasor diagram, signal resampling and amplitude modulation. All of there problems are analyzed in theoretical part of thesis. Here are derived all three form of Fourier series, described signal sampling, decimation and interpolation. Next thesis is focused on signal modulation and closer deal with amplitude modulation of harmonic and inharmonic signal. In practical part is example of calculation of Fourier siries for a specific signal, example of signal resampling and example of amplitude modulation for harmonic and inharmonic signal. Objective of practical part is creates programs focused on these problems. Programs should be interactive and their purpose is demonstrate the problem to students.
|
|
|
Power line parameters
Kavan, Pavel ; Krajsa, Ondřej (referee) ; Mlýnek, Petr (advisor)
At the beginning is diploma thesis focused on a distribute power line parameters measurement and examination changes of this parameters depending on using of various power line cables. On the basis of measurements is made a transmission channel in Matlab & Simulink, where are executed simulations with power transmission line. The simulated power line is based on measured distribute parameters or physical proportions of cabels. By changing different parts of simulated communication channel is a symbol error rate expressed on the lenght of transmission line.
|
|
|
TV Remote Controller
Bordács, Balázs ; Hála, Ondřej (referee) ; Hermany, Jiří (advisor)
This master’s thesis deals with parameters of the TV Remote Controller. Aim of this work is studying standards of remote controling of TV receiver by the way of infra-red light. For succesful solving of this project is important to learn about the theory of IrDA. In the second part ot this thesis is designed measurement unit for measuring the parameters of the remote control. The measurement unit includes an integrated IR receiver and photodiode for receive IR signals from remote control. The description of measurement unit blocks and principles of measuring parameters are also placed there. The final part is devoted to processing the measurement results of measuring levels and time waveforms of signal in the receiver module, directional characteristics of remote control and receiver. For measuremented unit is created laboratory task including the role specification and protocol.
|
guest ::
