|
|
Evaluation of physical fields in a landscape locality
Jílek, Michael ; Králík, Martin (referee) ; Smital, Lukáš (advisor)
The thesis is focused on gathering of theoretical backgrounds for geomagnetic measurements, measurement of electromagnetic and radiometric quantities in a natural locality, and subsequent evaluation of the obtained results from the point of view of their interrelations and in the context of hygienic regulations. All the theoretical backgrounds of each field are assigned to the measurement methodology and appropriate measuring technique, selected according to information from available sources. Appropriate instruments, landscape location, measurements were made, the results were evaluated and interpreted. The result is graphical output in the QGIS geographic information system.
|
|
|
The effects of ionizing radiation on semiconductor devices properties
Yermalayeva, Darya ; Šteffan, Pavel (referee) ; Musil, Vladislav (advisor)
This master’s thesis deals with the problematics of influence of ionizing radiation on semiconductor devices and their properties. The aim of the thesis is to analyze the different types of radiation that can occur in the areas of application of these components. In the second part, the degradation processes are explored, with emphasis on the influence caused by the radiation dose. Also, the displacement damage and SEE effects are described, but just slightly, because they are not part of this work. The third part describes the device design process and harmful effects, that have to be considered during the design phase. In the forth and the fifth parts of this work were done modeling of radiation effects (influence of dose rate, Single-Event Upset and Total Ionizing Dose) in PSpice program and was carried out the possibility of designing a simple dosimeter with silicon diode. In conclusion, the results of the thesis are summarized and evaluated.
|
|
|
Evaluation of physical fields in scenic area
Jílek, Michael ; Smital, Lukáš (referee) ; Rozman, Jiří (advisor)
The thesis is focused on gathering of theoretical backgrounds for geomagnetic measurements, measurement of electromagnetic and radiometric quantities in a natural locality, and subsequent evaluation of the obtained results from the point of view of their interrelations and in the context of hygienic regulations. All the theoretical backgrounds of each field are assigned to the measurement methodology and appropriate measuring technique, selected according to information from available sources. Appropriate instruments, landscape location, measurements were made, the results were evaluated and interpreted. The result is graphical output in the QGIS geographic information system.
|
|
|
Radiotherapy planning
Kumpová, Ivana ; Sekora, Jiří (referee) ; Kolářová, Jana (advisor)
The task of this thesis is to familiarize readers with the basics of the problem of ionizing radiation from its types and resources, through mechanisms of action and its effects on the human organism, to the possibility of calculating various characteristics. Close attention is paid to the use of ionizing radiation in medical approaches. There is in detail described process of radiotherapy planning and a basic properties of planning systems. Part of the thesis is also program RT-Plan processed in Matlab. The program simulates the planning system for external ionizing radiation therapy used in treatment. There is supplemented a detailed help and series of tests for the plan. It is suitable for possible use in teaching.
|
|
|
Laboratory exercise for RTG imaging systems
Kuchař, Otakar ; Macíček, Ondřej (referee) ; Mézl, Martin (advisor)
The aim of this Bachelor thesis is to study the X-ray and computed tomography. The theoretical section explains the basic physical principles, elementary particle, atom and ionizing. The following parts of the thesis deal with topics from the origin and various types of X-ray, to interaction of X-ray with tissue and X-ray detection. For computed tomography the thesis also explains data collection, the reconstruction of image using simple back projection, filtered back projection and algebraic reconstruction. In the practical part are analysed several measurements which were taken in the X-ray chamber designed for educational purposes by Leybold. The topics solve the attenuation of X-rays depending on the type and thickness of the material and the spectrum of the X-ray radiation. In the field of computerized tomography solve tasks as the change of contrast, parameters of acquisition and methods for reconstruction. The work includes prepared sample solutions to a laboratory experiments.
|
|
|
Determination of radionuclides in water and sediments
Bílek, Jiří ; Holubová, Zuzana (referee) ; Komendová, Renata (advisor)
This thesis has been prepared for DIAMO, Branch GEAM Dolní Rožínka. Literature research includes a description of the ionizing radiation, natural radionuclides, mining of uranium ore and mineral deposits; Běstvina and Licoměřice. The experimental part includes sampling, analysis and evaluation of the content of selected radionuclides in the two selected locations. The content of uranium and radium in sludge from mine water treatment plant is determined annually by an external laboratory, using of semiconductor gamma-spectrometric analysis (GSA). Determination of both radionuclides in waters in these areas is carried out in the Centre of testing laboratories (SZLAB) in Dolní Rožínka. Uranium and radium activity is below the detection limit. Sludges from Běstvina, according to the results of external laboratories, routinely show activity of both radionuclides. But activity in the waters from this locality is below the detection limit. The goal of this diploma thesis is to verify the radionuclide content in sludge from CDV Běstvina by another method. As a comparative method was chosen determination of uranium using the UV-VIS spectrophotometry with separation on silicagel. Location Licoměřice was chosen as a reference. Like a supplementary method for determining the concentration of uranium was chosen ICP-MS. For the determination of the radium was chosen radiochemical method scintillator ZnS (Ag).
|
|
|
Calculation of efficient dose rtg diagnostic irradiation
Bažantová, Lucie ; Drastich, Aleš (referee) ; Rozman, Jiří (advisor)
This bachelor thesis deals primarily with the theory of ionizing radiation and its interaction with matter. It deals particularly with x-radiation and the methods of its use in medicine. The thesis contains a description of the origin of the x-ray image and a description of the techniques of radiography and skiascopy. A list of quantities and units used in radiation physics and in radiation protection has been set out, with regard to assessing the risk involved in the interaction of x-radiation with an organism. In particular, the effective dose and the methods of evaluating this during medical irradiation have been set out. The main parts of the work are an overview of the software environment used in radiation physics and an example of the calculation of an effective dose for a concrete radiographic examination together with a detailed description of the method of calculation. At the end of the thesis there is a table of calculated values and an evaluation of them.
|
|
|
New Trends in Ionizing Radiation Shielding Research and Development
Vláčil, Martin ; Šťastný, Ondřej (referee) ; Katovský, Karel (advisor)
This thesis deals with the problem of shielding ionizing radiation which is a beam that has enough energy to ionize an atom or a molecule of an irradiated substance. This radiation can occur in nuclear facilities such as a nuclear power plant, a particle accelerator, or in X-rays in healthcare. Until now, standard shielding materials, most often lead or concrete, have been used to protect against ionizing radiation. New trends are therefore trying to replace these materials with lighter, more effective and harmless materials. The practical part is focused on measure the data to obtain the basic properties of shielding materials, such as the attenuation factor and the buildup factor. A measuring platform is described here, which can be used to measure the data needed to calculate the attenuation factor and the buildup factor. The measurement results are compared with tabular values to determine the accuracy of the measurements. Furthermore, the results of measurements of five concrete materials from the company MICo, spol. s r.o. To obtain theoretical values, the simulation program MCNP6 was used, in which it is possible to create a model of the measuring platform, which was used in practical measurements. Next the shielding material, source and detector are defined. The result lead again to the data needed to determine the attenuation factor. The results of measurement and simulation data in MCNP6 are evaluated and graphically processed into such a form that it is possible to compare the properties of shielding materials with each other.
|
|
| |
|
|
Measurement of radioactive radiation
Dyntarová, Markéta ; Kolář, Radim (referee) ; Chmelař, Milan (advisor)
The theoretical part of this Bachelor thesis, „The measurement of ionizing radiation”, is devoted to certain knowledge of radiation. It is concerned with problems of ionizing radiation detection, sorts of ionizing radiation are described shortly together with its influences on human organism and with abilities of organism protection. Thesis also contains description of solid phase detectors of ionizing radiation with detailed description of gas filled detectors. The practical part of this Bachelor thesis is focused on designing of radiation detector with GM counter and realization of indication part device.
|
guest ::
