|
|
Automatic measurement of induction machine using LabVIEW
Halfar, Lukáš ; Huzlík, Rostislav (referee) ; Bulín, Tomáš (advisor)
The main purpose of the thesis Automatic measurement of induction machine using LabVIEW was to develope an automated measuring system, which is used to perform tests of induction motors. The algorithm of the system is programmed in LabVIEW. In the practical part of this thesis, a measurement of the motor Atas Elektromotory Náchod a.s. T22VT512 is carried out, in order to verificate functions of the algorithm, and to perform tests of the motor to analyse losses. Another part of the work is dedicated to the electromagnetic calculation of the motor T22VT512. For this purpose, two softwares with different principles of calculation have been used. Firstly, the calculation is solved by an analytical based software called RMxprt. Secondly, the software Maxwell 2D is used to make the calculation of electric and magnetic fields by the finite element method.
|
|
|
Methods of analysis of vibration signals
Russ, David ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The main target of this master’s thesis is to focus on methods of analysis of vibration signals in electric machines. To get know the basic principles of the diagnostics methods, is important to clarify origin of the vibration signals and the impact they have. The selected methods were tested practically by measurement on electric machines. Measured data were processed in program LabVIEW. In this thesis were created programs which actually can be aplicated for complete vibrodiagnostics of electric machines in particular induction motors. The basic evaluation of vibration are the RMS value, Crest factor, time course and power spectrum. Results of this thesis are used to demonstrate how quickly and effectively can be vibration signals from electric machines evaluated.
|
|
|
Design of software single purpose machine for manufacturing test
Janoušek, Roman ; Šubrt, Kamil (referee) ; Houška, Pavel (advisor)
This diploma thesis deals with design and implementation of software for control of manufacturing tests of pneumatic proportional valve Festo MPYE. The single-purpose testing device consists of a DAQ device, a pressure sensor and of electrically operated pneumatic valves. In the introduction of this thesis are outlined aims of thesis followed by introduction to single-purpose assemblies commonly used in practice. The main part of this thesis deals with analysis and with solving the issues of assigned product testing. The designed and implemented modular software for control of manufacturing tests of assigned product is presented as an outcome and this software is easily adjustable for tests of a different product. In the conclusion are assessed achieved aims.
|
|
|
USB Measurement Module for Virtual Instrumentation
Hanuš, Ivan ; Beneš, Petr (referee) ; Havránek, Zdeněk (advisor)
The objective of this thesis is design of the universal USB measuring module for virtual instrumentation. The module is connected to PC via USB interface. The module have analog inputs and analog outputs. The inputs have some switchable ranges, adjustable high-pass and low-pass fiters. Also the module have the digital input-output unit with 8 channels with configurable data direction and voltage level. Physical layer for digital serial interfaces SPI/UART and I2C is also part of this unit. The module is able to communicate with LabVIEW enviroment. The teoretical part contains survey of the commercial USB modules for data acquisition and generation from various manufacturers with its basic parameters. Some selected modules are described in detail. Furthermore the thesis deals with possibilities of connecting the USB module with the LabVIEW enviroment. The practical part deals with the design of input-output circuits and with design of the module itself. Furthemore, tho communication protocol, utility library and demonstration LabVIEW software are described in this part. At the end of this part, there are results of verification measurements. The result of this thesis is completed universal USB measuring module with utility library and demonstration program.
|
|
|
Audiovisual stimulator
Bartoš, Michal ; Čech, Petr (referee) ; Hrozek, Jan (advisor)
The main objective of this study is to learn about the audiovisual stimulator and to create hardware resolution of stimulation LED glasses and in environment of the program LabView application, which operate this stimulation LED glasses and in the same time create sound of stimulation. Use environment of the program LabView. Application, which is create in environment of the program LabView, enable operate stimulation LED glasses and arrange sound from three source with two different method, which use modern AVS. Application contains a lot of security, informative and agreement components.
|
guest ::
