|
|
Parabolic antenna feed for X band
Lecián, Petr ; Mazánek,, Miloš (referee) ; Kasal, Miroslav (advisor)
The work addresses the unusual proposal feed for parabolic antenna with circular polariza-tion signal. This is a modified waveguide feed, waveguide polarizer with a septum. Contemporary RHCP and LHCP wave occurs in several applications of microwave commu-nication and measurement system. From this point of view the septum polarizer can be useful. The septum polarizer is a four-port waveguide device. The square waveguide at one end con-stitutes two ports because it can support two orthogonal modes. A stepped septum divides the square waveguide into two standard rectangular waveguides sharing a common broad-wall. The size of the septum as well as two versions of the waveguides excitation were analyzed and are described in this paper. Ansoft HFSS is software for design and simulation of feed. This software can visualize not only the specified model feed, but also the course of electromagnetic field in feed and over time.
|
|
|
Circularly polarized serial antenna array
Hurt, Martin ; Tkadlec, Roman (referee) ; Kufa, Martin (advisor)
This work focuses on the design circularly polarized serial antennas array operate in the ISM band (5.725 GHz to 5.875 GHz). Design of antennas is divided into three parts. In the first part is designed feeding system, followed by two types of circularly polarized antennas and at the last point, these components are integrated. Furthermore, these antennas are fabricated, measured their parameters and used for experimental verification of the influence of multipath transmission in-vehicle.
|
|
|
Circularly polarized dielectric resonator antenna
Zechmeister, Jaroslav ; Kufa, Martin (referee) ; Mrnka, Michal (advisor)
This thesis discusses the design circularly polarized dielectric resonator antennas for ISM band 5,8 GHz. In this work are explained and compared different ways of resonator feeding. There are also discussed the possibility of generating a circular polarization from a aperture feeding. Two methods of generating circular polarization in dielectric resonator antennas are simulated in CST Microwave Studio. This methods are C-shaped slot and cross slot. For antenna with cross slot feeding is also simulated effect of the manufacturing process to characteristics proposed antenna. The antenna is made, measured and the results are compared with simulations.
|
|
|
3D printed circularly polarized patch antenna
Drápal, Jakub ; Kaděra, Petr (referee) ; Láčík, Jaroslav (advisor)
The bachelor thesis deals with circularly polarized patch antennas. In this work, circular polarization is achieved by inhomogenous substrate. The first part summarizes the basic theoretical knowledge about the patch antennas, the shapes of the patch antennas, the excitation methods and the generation of circular polarization. In the next section, the design of a circularly polarized patch antenna on an inhomogeneous substrate is described, and several antenna concepts are proposed and compared with each other and with a conventional antenna. The effect of shaping the inclusions and their gradation in the substrate and the insertion of the inclusions around the centre conductor in the substrate is investigated. The last section is devoted to the realization of the designed antennas by 3D printing method and comparison of simulations from ANSYS HFSS software with measurements of the antennas.
|
|
|
Circularly polarized button antenna on frequency selective surface
Košík, Samuel ; Cupal, Miroslav (referee) ; Kuřátko, David (advisor)
This bachelor thesis is focused on circularly polarized button antenna on frequency selective surface for resonant frequency 5.5 GHz. The concept for this thesis is adopted from article [1]. This published version of the antenna was simulated to verify the validity of the antenna structure behaviour. Several optimalizations have been presented to achieve the best possible results. After all, fantom has been made, as well as the antenna, and used to demonstrate funcionality of the antenna near a human body tissue model. The whole structure with the resonant frequency 5.5 GHz and compact dimensions is primary designed for on-body communication. However, its potentiality is much wider.
|
|
|
SIW-Based Circularly Polarized Antenna Arrays
Špůrek, Jan ; Joler,, Miroslav (referee) ; Mazánek, Miloš (referee) ; Raida, Zbyněk (advisor)
Tato disertační práce prezentuje nový koncept kruhově polarizovaných anténních řad na bázi vlnovodu integrovaného do substrátu. Hlavní devízou konceptu je modularita, kdy je základní stavební blok řady použitelný pro tvorbu komplexnějších řad a tento blok zároveň slouží jako šablona pro návrh komplexnější struktury. Anténní řada byla simulována a experimentálně ověřena pro frekvence 17 a 60 GHz. Na základě dosažených výsledků byla odvozena metodologie pro návrh a identifikovány klíčové oblasti návrhu. Následně práce představuje techniku zvýšení šířky pásma osového poměru kruhově polarizovaných anténních řad pomoci parazitních flíčků, které jsou umístěny nad zářiče v definované vzdálenosti. Anténní řada z první části práce byla použita v simulacích a experimentálním ověření pro frekvence 17 a 60 GHz, kdy byla tato řada rozšířena o parazitní strukturu, přidávajíc další vrstvu modularity do konceptu.
|
|
|
Enhancement Of Axial Ratio Bandwidth Of Antenna Array By Parasitic Patches
Spurek, Jan
This paper summarizes the concept of a circularly polarized antenna array fitted with parasitic patches to increase its axial ratio bandwidth and compares the results of simulations and measurements taken on a reference antenna array. The measurements show a good agreement with the simulations and confirm validity of the proposed technique.
|
|
|
Artificial magnetic conductor for textile-integrated circularly polarized antenna
Ritter, John Richard ; Kadlec, Petr (referee) ; Raida, Zbyněk (advisor)
This thesis deals with a circularly polarized antenna using an artificial magnetic conductor (AMC). The concept for this antenna is adopted from [1]. The antenna structure was simulated in its original, published form to verify the validity of the results in [1]. The antenna structure was then modified for manufacturing on a textile substrate and for operation in the ISM 5,8 GHz frequency band. After the modification the antenna was manufactured. The antenna properties were subsequently measured to verify the simulated results. The antenna can be potentially used in wireless communication systems, such as wireless body area networks (WBAN).
|
|
|
Wideband low-profile circularly polarized antenna array
Benites Ayala, Jhony Cristian ; Cupal, Miroslav (referee) ; Raida, Zbyněk (advisor)
This bachelor’s thesis is focused on the study of a novel type of wideband low-profile circular array antenna with circular polarization and high gain. The aim of this thesis is to design, optimize and implement the proposed antenna for a 5.5 - 7 GHz frequency band. The thesis deals with theoretical fundamentals in order to subsequently present the concept of the antenna. Furthermore, it describes its design and implementation stages. The antenna was designed in the full-wave program CST Microwave Studio and fabricated on dielectric substrate. Both simulated and measured property results are evaluated in the conclusion.
|
|
|
Circularly polarized SIW cavity-backed microstrip patch antenna
Procházka, Petr ; Láčík, Jaroslav (referee) ; Mikulášek, Tomáš (advisor)
This bachelor thesis deals with a circularly-polarized substrate-integrated-waveguide cavity-backed microstrip patch antenna. The first part dedicates basic theoretical knowledge of microstrip patch antennas such as patch shape, the possibility of its excitation etc. The following part describes the possibilities and adjustments of generating circularly-polarized wave from a microstrip patch antenna for generating circularly-polarized waves and general knowledge about the advantages and application of circularly-polarized wave. The next part deals with a step-by-step design of a proposed antenna. The last part present a comparison of simulated and measured results.
|
guest ::
