|
|
Design of an apparatus for axial forces determination in screw connections
Lečbych, Jiří ; Frýza, Josef (referee) ; Svoboda, Petr (advisor)
This bachelor thesis deals with the design of the device for measuring axial forces in bolted joints. The first part of the thesis is focused on the research of the current state of knowledge of screw connections, force transducers and methods for deriving prestress including their control. Then, three conceptual solutions that fulfilled the assignment of the thesis were created based on the research. The final design that most closely corresponds to reality is described in detail including its advantages and possible measurement inaccuracies. The final 3D design was made into a drawing documentation.
|
|
|
The design of hinge on bus technical and luggage compartments
Daněk, Lukáš ; Tůma, Jiří (referee) ; Knoflíček, Radek (advisor)
The bachelor's thesis deals with the design of hinge for the doors on bus technical and luggage compartments. The theoretical part is focused on the types of hinges and their capabilities. The practical part deals with the design process, including system analysis using calculations and measurements. A solution universally applicable on different door sizes is proposed, which also meets the requirements for water drainage and door adjustment. The final assembly is optimized by calculations. Benefits and impacts are evaluated.
|
|
|
The structure of sport hall in Pardubice
Holubinskyi, Roman ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The subject of the diploma thesis is design and structural analysis of the sports hall. The building is located in Pardubice city. The dimensions of a floor plan are 45,5 m x 30,0 m, the height is 13,0 m. There is a sport facilities unit adjusted to the construction. The dimension of such an object is 39,0 m x 10,0 m. The load-bearing structure consists of truss girders, which are pin-supported by fixed columns. The distance between main trusses is 6,5 m. The supporting part of the roof deck consists of solid-purlins. Space stability is ensured by cross bracing and longitudinal bracing. All bars are rolled steel profiles and are designed according to current ČSN EN standards. Steel S355 is used as the construction material. In this work is processed a structural design report of main elements including connections and drawing documentation.
|
|
|
Steel Structure of the Technology Building
Paroulek, Adam ; Pilgr, Milan (referee) ; Brosch, Petr (advisor)
The diploma thesis deals with the design of a steel technological structure in the locality of Štětí. The struture is used for the paper production technology. The geometry of the structure was customized to technological requests. The statistic system was considered in two versions – joint connections and frame – joint connections. The frame – joint connections system was chosen for detail processing. The steel structure was calculated by Scia Engineer 19 software. The connections were calculated by Idea statica software. The thesis is processed according to valid standars of ČSN EN.
|
|
|
Airport Hall
Kulichová, Jana ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
The construction of the concourse is designed from steel.Construction was designed in 2 variants.The construction of the hall is radially curved in plan view with a circular sector on the longitudinal side.Roof structure consists of eight trusses at an axial distance of 9 m.Tracks are arched truss designed as a parallel.Trusses are designed to span 40m.Maximum ground clearance hall at the top is 14 meters.Letištní hala byla řešena v programu Scia Engineer 2014 a součástí je i výkresová dokumentace.
|
|
|
The structure of sport hall in Pardubice
Holubinskyi, Roman ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The subject of the diploma thesis is design and structural analysis of the sports hall. The building is located in Pardubice city. The dimensions of a floor plan are 45,5 m x 30,0 m, the height is 13,0 m. There is a sport facilities unit adjusted to the construction. The dimension of such an object is 39,0 m x 10,0 m. The load-bearing structure consists of truss girders, which are pin-supported by fixed columns. The distance between main trusses is 6,5 m. The supporting part of the roof deck consists of solid-purlins. Space stability is ensured by cross bracing and longitudinal bracing. All bars are rolled steel profiles and are designed according to current ČSN EN standards. Steel S355 is used as the construction material. In this work is processed a structural design report of main elements including connections and drawing documentation.
|
|
|
The design of hinge on bus technical and luggage compartments
Daněk, Lukáš ; Tůma, Jiří (referee) ; Knoflíček, Radek (advisor)
The bachelor's thesis deals with the design of hinge for the doors on bus technical and luggage compartments. The theoretical part is focused on the types of hinges and their capabilities. The practical part deals with the design process, including system analysis using calculations and measurements. A solution universally applicable on different door sizes is proposed, which also meets the requirements for water drainage and door adjustment. The final assembly is optimized by calculations. Benefits and impacts are evaluated.
|
|
|
Construction Project for Implementation of Industrial Hall for Automotive Industry
Světlík, Jiří ; Liška, Pavel (referee) ; Nečasová, Barbora (advisor)
This diploma thesis deals with construction technology project of a newly-built automotive industrial hall on the complex Hauk – Police nad Metují. The aim of the main construction object is to build a double aisle steel hall for industrial purposes including maisonette built-in which will become social and technical facility for prospective workers. The main construction facility is complemented by secondary structures, creating functional complex for required purposes. The thesis is focused on implementation of the main load-bearing prefabricated steel structure and cladding made of selected system. An integral part of the thesis include main technology phases realization study of the main construction object, a technological prescription filled-in with assembly drawings, a design of machine assembly including dealing with its transportation, a site equipment project, time schedules, a budget, a test and inspection plan and a security measures design for selected risks. The thesis is suplemented by a specialized section dealing with the heating of reinforced landscaping.
|
|
|
Exhibition hall steel structure
Selyvonenko, Ivan ; Pilgr, Milan (referee) ; Brosch, Petr (advisor)
The subject of the diploma thesis is the design and structural analysis of an exhibition hall. The building is located in Brno city. The dimensions of a floor plan are 121,8 m x 66,5 m, the height is 17,75 m. The load-bearing structure consists of arched truss girders, which are pin-supported by fixed columns. The distance between main trusses is 8,7 m. The supporting part of the roof deck consists of solid-purlins. Spatial rigidity of the structure is ensured by cross bracing and longitudinal bracing. All structural members are made of rolled steel profiles and are designed according to current ČSN EN standards. Steel S355 is used as the construction material. This thesis consists of structural design report of main load bearing elements including connections design and drawings.
|
|
|
Steel Structure of the Technology Building
Paroulek, Adam ; Pilgr, Milan (referee) ; Brosch, Petr (advisor)
The diploma thesis deals with the design of a steel technological structure in the locality of Štětí. The struture is used for the paper production technology. The geometry of the structure was customized to technological requests. The statistic system was considered in two versions – joint connections and frame – joint connections. The frame – joint connections system was chosen for detail processing. The steel structure was calculated by Scia Engineer 19 software. The connections were calculated by Idea statica software. The thesis is processed according to valid standars of ČSN EN.
|
guest ::
