|
|
Topology for next generation access networks
Kovář, Adam ; Sládok, Ondřej (referee) ; Grenar, David (advisor)
This thesis consists of basic requirements, application of optical fibres and final simulation of this network in specific location. This template shows ideal construction of optical fibre network for this specific location and also displays expected price of building this kind of network. In this thesis will be described this location and its problematic parts which can have critical impact on building of this network. As a part of design of this network we chose optical fibre and technology for protection of optical fibres. All of these items are collected and we can see approximate price. This thesis shows how the customer will be connected to network and also to this thesis is attached the map which shows exact position of the network. Simulation will prove networks stability and shows delay which can occur during using basic and expected applications on network.
|
|
|
Parameters of FTTx networks - Quality of services
Winkler, Aleš ; Reichert, Pavel (referee) ; Münster, Petr (advisor)
The main subject of this diploma thesis is to make a proposal to improve the optical access network for the transmission of Triple play services. I would here to the reader clarify method of proposal of optical network. There are described the kinds of optical access networks with parameters, for which we must look by their construction. There are described the modern methods of construction optical network too. In the theoretical part are discussed used architecture of networks too. I met here known standards, which I compared for big importance by their choice. A reason of construction of optical network are services known like Triple play. These services together with their problems and parameters are here discussed too. At the end of theoretical part I listed here measuring method for getting negative attribute distorting the led signal. In practical part the locality witch use the optical signal as the source of information is ordered. These network use unfit connections and has less possibilities than usual and this is the reason, why is the network not able to supply Triple play in requested quality. At first the analysis of ordered network was needed. Situation was complicated by the fact, that it has been prohibited entrance to me. The structure of network and network parts was known and documented by me. I made the proposals to improve this network in practical part. By the first proposal remained original kind of access network FTTB, but used new parts with higher performance. By the second proposal I made the network FTTH, by which it was possible to use the last haul optical cables with treatment and using new elements. It was needed to create solution by flat units. The resulting proposals are here evaluated, compared and cost evaluated. For rejection of access to optical network I did not make measuring, so I made simulation for variant FTTH for getting some parameters negative acting transmission.
|
|
|
Design of optical fiber sensor for vibration detection
Janoušek, Adam ; Münster, Petr (referee) ; Dejdar, Petr (advisor)
The master theses deals with a detailed analysis of optical fiber sensors. Specifically, there are discussed optical fibers, various types of sensors and realization optical fiber senzor and senzor system that has been optimized and processed data in real time. In master theses also describes the LabView programming enviroment and uses components, including the entire sensor systém of a sensors system that sends measured data
|
|
|
Optical communication in ultra violet band
Golubev, Martin ; Hudcová, Lucie (referee) ; Poliak, Juraj (advisor)
This bachelor thesis deals with analyzing atmospheric transmission media properties and performance ratio in ultraviolet band optics beam propagating in Earth's atmosphere. In work are definited a optical phenomenons, their implications and use. Description of atmospheric transmission media analyzes the impact of individual particles in the atmosphere on optical beams. There are described a effect of ultraviolet light on living organisms. Simulations of performance ratio using Matlab and proposal of concrete link of UV NLOS for short range are serve as a basis for further research into this field of optical communications.
|
|
|
Mathematical analysis and simulation of optical fiber transmission parameters
Smrž, Jan ; Šporik, Jan (referee) ; Tejkal, Vladimír (advisor)
This thesis deals with the transmission of optical fibers, their properties and method of calculation. The paper presents different types of fiber types and standards. There is a description of the connection of optical fibers with different methods, including variations joints. Further side effects are broken fibers, dispersion and attenuation. The last part is devoted to describing the program, which was part of this work. The program is used to calculate the transmission parameters of optical fibers and optical losses incurred in connection.
|
|
|
Influence of optical connectors and of other effects on optical link attenuation
Winkler, Aleš ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
In this time the metalic wires meet not the requirements of high capacitance and rate wire and so the new, modern fiber wires are more and more being used. This bachelor`s thesis deals with three basic kinds of connections of fiber wires, optical connector, mechanical coupling a optical weld, and their effect on optical link attenuation realized by fiber optics. The optical link is possible realized number of kinds fiber optics. In this thesis are most often used multimod and a little multimod fiber optics. By mechanical coupling are explored their effects of attenuation on optical link a their detrition after disconnection and next connection back to the optical line. For optical weld is explored quality assignet optic welder. For optical connectors is explored their quality of cleanness through apparatus OTDR( Optical Time Domain Reflectometer) and geometrical properties through apparatus FIBO 250.
|
|
|
Optical fibre factors that limit thetransmission capaity of optical lines
Rouča, Tomáš ; Tejkal, Vladimír (referee) ; Reichert, Pavel (advisor)
Bachelor´s thesis more closely specifies effects of attenuation and dispersion of optical fibers in connection with influencing transmitted signal bandwidth and data transfer capacity. It also examines the influences acting on the optical signal passes through an optical fiber and the mechanism that lead to the attenuation or complete suppression of the signal. The first chapter describes in detail the transmission environment in terms of optical fiber attenuation characteristics of the signal loss caused by rough handling of the optical fiber, manufacturing and material specifications, resulting in scattering or absorption of the transmitted signal. Also, whether the description of fiber dispersion, resulting in the shrinking spectrum of transmitted signal and thus the amount of data at a certain point in time transfer to a defined distance. The second chapter analyzes the effects of attenuation and dispersion in fiber optic transmission capacity currently used in presently optic cables, mechanical couplings, connectors and active components. By mentioning a few examples of real transmission lines with regard to the spectral transmission characteristics that these systems require. This study also includes protocols used to transfer information using xWDM systems. The third chapter deals with modern methods to establish a number of optical signals into a single transmission fiber. Particular attention is devoted to describing the principle of association of the channels in the optical frequencies xWDM, since this method does not currently have a standard solution of information transmission optical fiber for its use significantly more bandwidth, longer distances while maintaining vaulted speed transmission and the possibility of flexible extension without laying new cables and reduce the cost of building transmission lines. The last chapter focuses on describing the implementation of a mathematical model to the spectral characteristics of optical fibers.
|
|
| |
|
| |
|
|
Ethernet for metallic cables
Víteček, Aleš ; Člupek, Vlastimil (referee) ; Zeman, Václav (advisor)
The bachelor thesis "Ethernet for Metallic Cables" deals with the analysis of Ethernet technology, the most used technology for running computer networks. Specifically, it is focused on transmission via metallic line. The aim of this thesis is description of technology, research of the latest Ethernet standards, including the latest categories of metallic lines. Laboratory tasks and its implementation are described below. This thesis also contains a detailed lab instructions and reference values.
|
guest ::
