|
|
Influence of adhesive layer on the mechanical behavior of PP+ inorganic filler composite.
Švestková, Dana ; Krčma, František (referee) ; Nezbedová, Eva (advisor)
The diploma thesis was dealt with the study of system PP and particular filler, specifically PPH and like a filler was used commercially available CaCO3 (SOCAL P3). This type of filler is declared by the producer as a filler without surface treatment. The submitted thesis had a goal to find and testing the suitable method and methodology for defined surface treatment of the filler. This is the first step for systematic study of influence the various types of adhesive layer on mechanical properties of declared composite. The plasma discharge behind static pressure was used for the surface treatment of the fillers. These fillers were afterwards analyzed by using of sedimentation analysis, infra - red spectroscopy (FT-IR) and scan electron microscopy (SEM). The composites with various volume part of the fillers were prepared in PIB and studied by short-time tests. Regarding to experimental demand there wasn't possible to realize the whole originally intended program i. e. study of influence the different types of adhesive layer, including to form the model for FEM approach. Nevertheless finding and testing the suitable method of surface treatment is completely basic for the others study. The above mentioned method was used in this application for the first time and it is possible to consider this process like an original approach.
|
|
|
Influence of surface modifications on fatigue life
Gerec, Matúš ; Kučera, Pavel (referee) ; Vopařil, Jan (advisor)
This bachelor thesis presents the description of surface treatment technologies used on dynamically loaded mechanical parts. It explains the influence of each surface treatment on high–cycle fatigue life. Then the thesis describes the analytical calculation of fatigue limit of real part and approach to design of mechanical part on infinite life.
|
|
|
Piston Rings of Modern Petrol Engines
Cupák, Václav ; Maršálek, Ondřej (referee) ; Raffai, Peter (advisor)
This bachelor thesis deals with issues of piston rings used in modern petrol engines. The first part is focused on describing of functions and requirements with which piston rings must deal with. Next part is aimed on shapes of piston rings. Materials from which are piston rings made of are part of third chapter. For proper function, it is important to make some surface treatment. The last chapter contains surface treatment of piston rings.
|
|
| |
|
|
Design of paint systems in coachwork parts of easel issues
Fajfr, Jan ; Žák, Ladislav (referee) ; Kubíček, Jaroslav (advisor)
This bachelor thesis deals with proposal for a new type of painting. There is a solution of proper pretreatment for undercoat. Teoretical part includes analysis of these pretreatments, types of powder coatings, options how to apply these coatings including curing. There have been made samples for the purpose of this work and the samples were tested for resistance. Conslusion of this work contains results of the experiment and the choice of the best type of painting with regards of economy.
|
|
|
Surface treatments of internal combustion engines cylinders
Malec, Petr ; Raffai, Peter (referee) ; Maršálek, Ondřej (advisor)
This bachelor thesis is a professional research, which describes the most common methods of surface treatments of modern internal combustion engines cylinders. The work consists of the distribution of the species changes, their use and justification of their application. It also describes the technology of individual surfaces, their coating and finishing operations to achieve the best results of sliding surface.
|
|
|
Surface treatments of parts internal combustion engines
Toman, Josef ; Novotný, Pavel (referee) ; Maršálek, Ondřej (advisor)
This bachelor thesis is a professional research dedicated to the most frequently used surface treatments, applied to the stressed parts of internal combustion engines. The thesis also refers to surface treatments classification, benefits for the automotive industry and reasons for their development. Further it focuses on definitions of the technologies used, characteristics of processes and coatings, finishing operations after surface treatments and application of these treatments on the parts of internal combustion engines.
|
|
|
Influence of surface treatments on the quality of molded parts
Okurka, David ; Dvořák, Milan (referee) ; Hušek, Martin (advisor)
This thesis examines the influence of surface treatments on the quality of molded parts. At the beginning of this work explains why the finish and what are the current demands on the development of manufacturing technologies. It further describes the most common surface treatment of metals, which are currently very often occur. The next section is divided into forming the surface and volume and describes the different types of species-forming, such as cutting, bending, drawing, etc. At the end of the work described cooperation with the Hettich ČR, k.s. and Tokoz, a.s.
|
|
|
Surface treatment of roll bearings
Kubelka, Milan ; Klakurková, Lenka (referee) ; Švejcar, Jiří (advisor)
The bearings are one of the most widely used construction components enabling mutual movement of parts and at the same time transmission of interacting load. The basic requirements placed on components of roll bearings are particulary increase of contact fatigue resistance, decrease of the friction coefficient between the rolling bodies and bearing rings, increase of hardness and abrasion resistance of functional surfaces, the wear resistance, corrosion protection and finally the electrical and optical properties too. As production of bearings from materials with these attributes would be quite expensive, surface modifications are used for improving the mechanical properties. The main task of this bachelor thesis is description and evaluation of technologies suitable for surface treatment of roll bearings with increased attention to those types of surface treatment which, in cooperation with SVÚM will be studied in more detail in the experimental part of this work (especially polymer coatings, phosphate films and DLC - type coatings). The wear evaluation of different types of coatings was performed with the aid of scanning electron microscopy after the tribological testing.
|
|
|
Modern treatments by powder paints
Turek, Tomáš ; Kovář, Petr (referee) ; Kubíček, Jaroslav (advisor)
The thesis deals with the process of powder coating paint, a description of the individual steps and types of used equipment. Thesis also includes the distribution of powder paints and overview of basic information, color chart systems and the description of color tone perception. At the end of the thesis are summary of quality standards of deposited surface and technologic process of coating using in the powder coating in paintshop.
|
guest ::
